• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.72-77
• /
• 2011

Spectrum sensing is a critical functionality of CR network; it allow secondary user to detect spectral holes and to opportunistically use under-utilized frequency bands without causing harmful interference to primary use. Recently, wideband service has been increase for processing abundance of data traffic. So CR network needs a realizable implementation design of spectrum sensing for wideband. To get high resolution performance of wideband sensing must precede algorithm processing for reliability signal detection. By the way, the performance of spectrum sensing can be degraded due to fading and shadowing. In order to overcome this problem, we propose system model of wideband sensing scheme on energy detected collaborative technique. we divide wideband into narrowbands and use narrowbands to detect signal excepting some narrowbands including bad channel through the CSI. And we simulate and analyze in terms of detection probability with various SNR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2397-2402
• /
• 2014

Recently, heterogeneous mobile communication network is attracting plenty of interest to serve explosively increasing mobile data traffic. Although the heterogeneous mobile communication network can enhance spatial reuse ratio by using both conventional macro cells and small cells simultaneously, it causes the unbalance in performance of downlink and uplink. In this paper, we propose a new cell selection scheme for heterogeneous mobile communication network. In the proposed cell selection scheme, mobiles select their home cells by considering both uplink and downlink performance, contrary to conventional schemes. We analyze the performance of the proposed scheme in terms of average cell transmission rate through system level simulations and compare it with those of conventional schemes.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1172-1184
• /
• 2003

At present, new techniques based on different component reference models for the integration of component and system of different platforms, such as EJB and COM+, are introduced. The operation between the components in the identical component platform is realized by the composition at the source level. In case of the different component platform, however, it is impossible to use combined components in real condition although they are components of similar domain. In this paper we proposed a solution for the composition problem by using component transformation methodology based on model between EJB and COM+ components which are different components. For the composition between EJB and COM+ components, we compared and analyzed each reference model, then proposed the Virtual Component Model which is implementation independent and the Implementation Table for the mutual conversion. Reffering to the Virtual Component Model and the Implementation Table, we can generalize each Implementation model to the Virtual Component Model, make the Virtual Component Model which is implementation independent through the virtual component modeling, transform EJB and COM+ components selectively. Proposing the effective Model Transformation method to the different component platform, we can combine EJB and COM+ components.

• The KIPS Transactions:PartD
• /
• v.9D no.3
• /
• pp.409-416
• /
• 2002

The reuse by using framework is proposed to improve productivity. It is a set of usable and expandable classes and their connectivity. But frameworks are described with programming languages, it is hard for developers to learn the collaborative patterns of a framework by reading it. Patterns are one approach to improving the documentation. But this should be redesigned to expand and redefine the framework. The necessity of the formal description of architecture information is being proposed to relate to programming language. This paper support the following points. First of all, it has been proposed the description of the needed elements when developing a framework using ADL. Secondly, the current development process has been refined to be suitable for developing the domain framework. Thirdly, it has been proposed the development of a application using a framework implemented by an architecture information described with ADL. Overalls, the main contents of this research is defining the ideas of a description and development of an architecture framework using ADL.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.2
• /
• pp.84-93
• /
• 2008

Modeling and rendering of cloth texture have been regarded as one of the most important factors to enhance reality of the contents in the digital contents industry. So far, however, two major approaches to realistically describe the cloth texture were developed: building analytical reflectance model for target cloth and sometimes thread itself and obtaining overall reflectance model using optical equipments. However, yielding a plausible analytic reflection model satisfying many subtle characteristics of a cloth is not an easy task; moreover, fine-detailed modeling of the cloth pattern across the target clothes should also be accompanied by huge amount of computation. The method to obtain overall reflectance model needs expensive measurement equipments and data size becomes huge. Since it applies in the end the reflectance model obtained at one point of a cloth to across whole the visible area of the target clothes, it cannot properly reproduce the pattern of the clothes nor the texture. To address the aforementioned problems, this paper proposes a simple low cost camera rig and a novel method for realistic modeling and rendering of the cloth texture by analyzing photos taken by the proposed camera rig, which can reproduce even the texture pattern applied to the whole clothes, overcoming the one-point reflectance model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.86-89
• /
• 2009

In this paper, a broadband power line communication modem and network technology to develop tests with actual characteristics of the underground power line communication channel to be interpreted. Length and structure of the underground distribution line due to underground distribution line to the broadband powerline communication channels to measure the amount of attenuation on the signal generator, spectrum analyzer, such as contactless coupler was used to configure the channel measurement system. Demonstration tests in the test line as a single line by selecting the longest high-voltage lines where the two-channel measurement and signal attenuation on the noise level was measured. Measuring results degrade communication performance can be quite sure that was the presence of impulse noise, long lines, the line length was confirmed by the high-frequency attenuation appears.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.213-221
• /
• 2021

In this paper, we suggest the Deep Neural Network Model System for predicting results of the match of 'League of Legends (LOL).' The model utilized approximately 26,000 matches of the LOL game and Keras of Tensorflow. It performed an accuracy of 93.75% without overfitting disadvantage in predicting the '2020 League of Legends Worlds Championship' utilizing the real data in the middle of the game. It employed functions of Sigmoid, Relu and Logcosh, for better performance. The experiments found that the four variables largely affected the accuracy of predicting the match --- 'Dragon Gap', 'Level Gap', 'Blue Rift Heralds', and 'Tower Kills Gap,' and ordinary users can also use the model to help develop game strategies by focusing on four elements. Furthermore, the model can be applied to predicting the match of E-sports professional leagues around the world and to the useful training indicators for professional teams, contributing to vitalization of E-sports.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.266-283
• /
• 2022

With the rapid development of autonomous vehicle technology, unexpected accidents are occurring. Therefore, it is necessary to minimize user accident damage through the development of autonomous traffic safety education. Since edge cases, accident type, and risk factor analysis are important for realistic education, overseas case studies and demonstrations were carried out, and based on this, two curriculum for service providers and general users were developed. The service provider curriculum consisted of OEDR, sudden stop, cut-in, take-over, defensive driving, system malfunction, policy and information security education, and the general user curriculum consisted of attention duty, take-over, operating design domain, accidents type, laws, functions, information security education.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.55-57
• /
• 2022

In this study, a customized semi-passive RFID receiver module was implemented for in-VIVO deep tissue photo-therapy. A novel wireless technique is required due to a limitation of RF communication in body environment, as internal body has a complex structure such as, skin, fat, skeleton, water, and so on. Recently, coherently incoherent beamforming (CIB) based on RFID was introduced and it is able to transmit wireless signal with high reliability under the incoherent condition such as in-VIVO deep tissue. The proposed miniature photo capsule based on RFID consists of miniature controller, ultra small LED array and wireless RFID chip. RF Reader can access with standard RFID protocol (ISO 18000-6c) using UHF RFID antenna, a control command is wirelessly writtern on USER Bank memory. With received control command, therapy LED array dims with mulilevel under timer control. The signal process of designed RFID photo therapy capsule is analyzed and evaluated under the various environments in detailed.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.650-656
• /
• 2023

This paper implements a channel model for mmWave bands using an NS-3-based 5G system-level simulator and analyzes the reliability and validity of the implemented model through RF performance verification. The channel model for RF performance verification in the mmWave bands consider parameters such as characteristics defined in 3GPP TR 38.901, beam-forming, antenna configuration, scenarios, among others. Furthermore, the simulation results verify compliance within the ranges permitted by the 3GPP standards and verify reliability in indoor environmental scenarios by exploiting the Radio Environment Map (REM). Therefore, the channel model implemented in this study is applicable to the actual design and establishment of 5G networks, presenting a method to evaluate and validate RF performance by adjusting various parameters.