• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.69-73
• /
• 2013

Internal heat exchanger (IHX) apparatus using the temperature difference between high and low pressure lines in vehicle air conditioning system is a good method to enhance the cooling performance. In this study, we designed various double-pipe internal heat exchangers which have inner fins between the internal pipe and external pipe. We also measured the performance characteristic (pressure drop, cooling capacity, compressor work and coefficient of performance (COP)) of the modified internal heat exchangers that had the change of the fin height and the inside shape of the internal pipe. This experimental results indicated that the liner and serration type internal heat exchanger was the best cooling performance. In addition, the air conditioning system with the liner and serration type internal heat exchanger showed the improved performances of about 6.4% and 9.2%, respectively, for the cooling capacity and COP.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.1-11
• /
• 2017

While they are becoming more viable, synthetic natural gas (SNG) plants, with their high temperatures and pressures, are still heavily dependent on advancements in the state-of-the-art technologies. However, most of the current work in the literature is focused on optimizing chemical processes and process variables, with little work being done on relevant mechanical damage and maintenance engineering. In this study, a combination of pipe system stress analysis and detailed local stress analysis was implemented to prioritize the inspection locations for main pipes of SNG plant in accordance to ASME B31.3. A pipe system stress analysis was conducted for pre-selecting critical locations by considering design condition and actual operating conditions such as heat-up and cool-down. Identified critical locations were further analyzed using a finite element method to locate specific high-stress points. Resultant stress values met ASME B31.3 code standards for the gasification reactor and lower transition piece (bend Y in Fig.1); however, it is recommended that the vertical displacement of bend Y be restricted more. The results presented here provide valuable information for future risk based maintenance inspection and further safe operation considerations.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.6
• /
• pp.14-21
• /
• 2013

While a detailed cost estimation utilizes the comprehensive quantity information obtained from a complete drawing and specification, an approximate cost estimation heavily relies on the subjective decisions. This phenomenon is because the approximate estimation is usually conducted in early stage of the construction phase where the drawing and specification are not available. This study developed a roadway construction cost estimation system which enables users to estimate the approximated cost of the project in early stage. The system identifies the variation of the construction costs due to the road route change using a cased based reasoning(CBR) method. Overall the system is expected to improves the accuracy and effectiveness of the estimation process, because it would provide users with increased accessability and consistent results in early stage of the project which leaded to the increased work transparency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1809-1815
• /
• 2022

A digital twin is a technology that creates a virtual world identical to the real world. Problems in the real world can be identified through various simulations, so it is a trend to be applied in various industries. In order to apply the digital twin, it is necessary to analyze the drawings in which the structure of the real world to be made identical is designed. Although the technology for analyzing drawings is being studied, it is difficult to apply them because the rules or standards for drawing drawings are different for each author. Therefore, in this paper, we implement a system that analyzes and classifies the vertex detail, one of the drawings, using artificial intelligence. Through this, we intend to confirm the possibility of analyzing and classifying drawings through artificial intelligence and introduce future research directions.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.157-162
• /
• 2009

As the improvement of computer performance and the development of IT technology have influence upon publishing industry, the e-Book system, a type of electronic resources, has come out. This is a method to use both texts and 2D image illustrations. Nowadays, there are more and more users who want high quality contents and a variety of contents such as the illustrated fish book using the 3D system. This article adds 3D animation objects to the current e-Book system and designs and realizes the 3D fish simulation system to which e-Book technology is applied so as to improve the comprehension of texts and readability of detailed information and increase readers' immersion as well.

• Journal of Applied Reliability
• /
• v.4 no.2
• /
• pp.65-72
• /
• 2004

If a quality system is properly designed and implemented, it will be one of the most effective tools in the prevention of quality problems, as well as potential product liability incidents. The purpose of this research is to present how the quality system should developed and focuses more on what it should include for the sake of preventing unsafe products and design. Includings are descriptions on how a manufacturer can put a comprehensive procedures and processes for product safety and effort in place, and move their existing quality system to a new level.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.545-552
• /
• 2008

It becomes to make its necessity of getting more closer approach for the design and the detailed analysis of implementation method and study with respect that the plan is put into shape for the interconnection between Seoul Line No.9 and the AREX line which has been on commercial running since it had been opened on March 2007. We introduce the concrete analysis and the rasied problems and a way how to solve as well for the characteristics of interconnection train and signaling 시스템tem structure between two lines in order to design and implement the interconnection running. Also,

• Journal of Korea Multimedia Society
• /
• v.10 no.9
• /
• pp.1209-1219
• /
• 2007

It is difficult to run 3D graphics based application on the embedded system with hardware constraints. Therefore, such a system must have a systematic infrastructure which can process various operations with respect to 3D graphics through any graphic acceleration module. In this paper, we present a method to implement 3D graphics acceleration device driver on Tiny X platform which provide an open source graphics windowing environment. The proposed method is to initialize the driver step by step so that the direct rendering infrastructure can use it properly. Moreover, we evaluated overall 3D graphics performance of an implemented driver through a simple but effective benchmark program.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1287-1292
• /
• 2018

In case of fire, the information related with the fire need to be provided to fire fighters in order to extinguish the fire efficiently. However, existing fire detection systems have the problem not to provide the data of the fire to fire fighters visually. In this paper, we propose the fire spot system using a cloud server to solve this problem. In the proposed system, the sensors installed in a building collect the gas and temperature data and store them into the cloud database using a wireless network. For fire fighters in the field, the details and history of the fire spot are displayed visually on top of the blue print retrieved from the cloud database using a smart device.