• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.67-74
• /
• 2005

Crypto-systems have difficulties in designing hardware due to the various standards. We propose a programmable and configurable architecture for cryptography coprocessors to accommodate various crypto-systems. The proposed architecture has a 32 bit I/O interface and internal bus width, and consists of a programmable finite field arithmetic unit, an input/output unit, a register file, and a control unit. The crypto-system is determined by the micro-codes in memory of the control unit, and is configured by programming the micro-codes. The coprocessor has a modular structure so that the arithmetic unit can be replaced if a substitute has an appropriate 32 bit I/O interface. It can be used in many crypto-systems by re-programming the micro-codes for corresponding crypto-system or by replacing operation units. We implement an elliptic curve crypto-processor using the proposed architecture and compare it with other crypto-processors

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.47-56
• /
• 2008

An RFID system comprises a reader and a tag, and this paper focuses on a tag design. A UHF tag is activated by energy supply using electromagnetic waves and energy reflection through impedance mismatching. The tag uses a $0.25{\mu}m$ CMOS process and comprises a digital part executing tag protocols, a 512-bit memory, and an analog part having a rectifier, a modulation/demodulation unit, a clock generator, etc. The total dimension of the tag, including a saw line, is $750{\mu}m*750{\mu}m$ and the power consumption of the tag consumption power is about $17.8{\mu}W$ at a supply voltage of 2V.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.118-123
• /
• 2015

According to the recent report, solar street lamp connected to a non Maximum Power Point Tracking(MPPT) charger, can lead to a system-wide decline in power output with as much as 30%. This paper proposes the charge controller with direct duty ration control for 250W solar street lamp in order to improve the efficiency of photovoltaic from these output power reduction. This paper covers the Pulse Width Modulation(PWM) controller and power conversion topology and analyze the MPPT method for charge controller. The power conversion part consists of push pull converter based on PWM controller using 8bit MCU in order to have lower manufacturing cost. The PWM controller with direct duty ratio control algorithm is constantly tracking the maximum power point of photovoltaic module and increases energy output power. The test results shows 97.1~97.4% MPPT efficiency and the experimental hardware is implemented based on the solar simulator condition for 241W. Thus, the implemented charge controller shows its feasibility for the real application, especially under solar street lamp.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1653-1659
• /
• 2013

In this paper, we propose a new ECAD software for efficiently analyzing and debugging of digital architecture implemented in Verilog HDL or VHDL codes. This software firstly elaborates HDL codes so as to extract internal architecture structure, then generates several graphical aids such as hierarchical schematics by applying placement and routing algorithm, object tree to show configuration of each module, instance tree to show hierarchical structure of instances, and SPD (Signal Propagation Diagram) to show internal interconnections. It is more important function that same objects in different views(HDL codes, object tree, instance tree, SPD, waveform etc.) can be highlighted at the starting any object. These functions are sure to improve efficiency of manual job to fix bugs or to analyze HDL codes.

• KIISE Transactions on Computing Practices
• /
• v.21 no.2
• /
• pp.148-153
• /
• 2015

In our domestic software industries, it is focused on such a high quality development/ testing process, maturity measurement, and so on. But the real industrial fields are still working on a code-centric development. Most of the existing legacy systems did not keep the design and highly increased the code complexity with more patching of the original codes. To solve this problem, we adopt a code visualization technique which is important to reduce the code complexity among modules. To do this, we suggest a tool chaining method based on the existing open source software tools, which extends NIPA's Software Visualization techniques applied to procedural languages. In addition, it should be refactored to fix bad couplings of the quality measurement indicators within the code visualization. As a result, we can apply reverse engineering to the legacy code, that is, from programming via model to architecture, and then make high quality software with this approach.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.88-91
• /
• 2010

In this paper, We are composed the position recognition and speed control using the moving robot in the shield Room with a RF Module and Ultrasonic Sensors. Double look up tables are selected a reference value/duty ratio. The moving robot with the dual fuzzy rules which can decrease a Conversion time than basic fuzzy control rules at start point and curve region. Also, a changing times of double look up table are rise at specific points b1,c1,d1 in the e-${\Delta}e$ phase plane and the one of the look up table is used which for increase rising time at transition area, the other used for rapidly conversion to the reference value. We verified that a dual fuzzy control rules get the good response compare with the basic fuzzy control rule.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.145-149
• /
• 2002

CORONA는 미국이 1960년에서 1972년까지 냉전시대 관심지역에 대한 첩보영상을 취득하기 위하여 운영한 영상취득시스템으로 1995년 일반에 자료가 공개됨에 따라 과거의 고해상도 영상자료를 이용할 수 있는 길이 열리게 되었다. 그러나 현재까지 CORONA 영상처리를 위한 모듈을 제공하는 원격탐측 소프트웨어가 개발되어 있지 않기 때문에 CORONA 영상을 이용하여 수치표고모형이나 정사영상을 제작하기 위해서는 적절한 모델링 방법이 필요하다. CORONA 영상은 파노라마 영상으로 필름 가장자리로 갈수록 왜곡이 많이 생기며 사진기 지표가 없고 위성의 궤도와 위치, 자세, 속도, IMC(Image Motion Compensation)에 대한 자세한 자료를 제공하지 않는 문제점이 있다. 따라서 본 논문에서는 지형복원을 위하여 지상기준점을 이용하는 2가지 모델링 방법을 이용하였다. 첫 번째는 파노라마 왜곡과 촬영 비행체 이동에 의한 왜곡, IMC에 의한 왜곡을 보정하는 모형식을 구성하여 이용하였으며, 두 번째는 위성과 센서에 대한 정보를 필요로 하지 않는 다항식비례모형(RFM; Rational Function Model)을 이용하였다. 대상지역은 서울지역의 입체영상으로 대략 $33km{\times}26km$ 지역이다. 영상은 지상해상도 약 2.7m로 스캐닝하였고 1:1000 수치지도를 통해 20개의 기준점과 36개의 검사점을 관측하였다. 검사점의 위치정확도를 평가해 본 결과 첫 번째 방법은 수평방향으로 평균 3.9m(X), 2.8m(Y)의 오차를 보였으며 표고의 경우 4.2m의 오차를 보여주었다. 두 번째 방법은 수평방향으로 평균 3.2m(X), 2.8m(Y)의 오차를 보였으며 표고의 경우 5.5m의 오차를 보여주었다. 지형복원 정확도를 검증하기 위하여 첫 번째 방법을 이용하여 대상지역 중 일부인 서울 남산지역에 대해 정사영상과 10m간격의 DEM을 제작하였으며 1:1000 수치지도를 통해 제작된 DEM과 비교한 결과 총 43990개 격자점의 표고 차이는 평균 5.98m였다.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.75-82
• /
• 2016

The most of public services that we use these days is distributed and supplied as 'App' service because of wide spread of smat phones. Especially, since the interest of general citizens about usabilitu of public data has been increased, in case of Seoul, people can reach the data through 'Seoul Open Data Plaza' of 25 regions of Seoul. It becomes possible to construct various throughout this system. Ultimately, in case of users, they are provided many services through their electronic media. Looking at the development and research of public data service, they are mostly focusing on service or building up the service, but the research on visualization of contents is insufficient. This study is suggesting the specific plan and directionality of building public service using the public data which studied in the advanced research, "The user interface platform". Finally. this research is for a right usage of public data in the smart urban environment in near future and providing the practical public service.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.1-6
• /
• 1999

A piezoelectric (PZ) biosensor system detecting Salmonella spp. was developed. The system consisted of an oscillator, a frequency counter and an antibody-immobilized quartz crystal. An anti-Salmonella antibody was immobilized on one gold. surface of the quartz crystal with protein A. Salmonella detection was made by measuring resonant frequency shift owing to a mass change by specific binding of microbial cells to the gold surface of the PZ crystal. The PZ antibody sensor was operated optimally at 0.1M phosphate buffer, pH 7.2 and $35^{\circ}C$. The sensor was quite specific to Salmonella spp. The obtained frequency shift was correlated with the Salmonella concentration in the range of $10^5{\sim}10^6\;CFU/mL$. The frequency shift increased further by addition of polystyrene beads. The Salmonella detection which is indicated by a steady-state microbial adsorption to the quartz crystal was accomplished within 50min.

• The Journal of Society for e-Business Studies
• /
• v.12 no.2
• /
• pp.111-132
• /
• 2007

Developing and managing Web applications are more complex than ever because of their growing functionalities, advancing Web technologies, increasing demands for integration with legacy applications, and changing content and structure. All these factors call for a more inclusive and comprehensive Web application design method. In response, we propose a context-based Web application design methodology that is based on several classification schemes including a Webpage classification, which is useful for identifying the information delivery mechanism and its relevant Web technology; a link classification, which reflects the semantics of various associations between pages; and a software component classification, which is helpful for pinpointing the roles of various components in the course of design. The proposed methodology also incorporates a unique Web application model comprised of a set of information clusters called compendia, each of which consists of a theme, its contextual pages, links, and components. This view is useful for modular design as well as for management of ever-changing content and structure of a Web application. The proposed methodology brings together all the three classification schemes and the Web application model to arrive at a set of both semantically cohesive and syntactically loose-coupled design artifacts.