• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.520-525
• /
• 2008

SCA(Software Communications Architecture)는 SDR(Software Defined Radio)를 위한 표준 플랫폼으로, 어떤 플랫폼에서도 SCA 표준을 이용하여 구현된 시스템이라면 SCA 규격을 지켜 작성된 소프트웨어 모듈을 실행할 수 있도록 하고 있다. SDR은 기존의 하드웨어로 구현하였던 무선 통신 시스템을 모두 소프트웨어로 구현하고자 하는 기술이지만, 임베디드 시스템의 경우에는 프로세서의 성능이 현저히 떨어지기 때문에 실시간 신호 처리를 보장할 수가 없다는 문제점이 있다. 따라서, 무선통신의 성능을 보장하기 위해서는 범용 프로세서와 함께 DSP나 FPGA와 같은 특화된 하드웨어의 사용이 필요하게 되었다. 이러한 경우에는 웨이브폼 어플리케이션 작성을 위해서 하드웨어와 소프트웨어의 파티셔닝도 고려해야 한다. 본 논문에서는 SCA 플랫폼에서의 웨이브폼 어플리케이션을 빠르게 생성하는 방법을 제안하여 다양한 하드웨어를 사용하는 플랫폼에서의 최종 웨이브폼 어플리케이션을 위한 설계 공간 탐색(Design space exploration)을 도와, 내장형 시스템에서도 효율적으로 실행 가능한 웨이브폼 어플리케이션을 개발할 수 있도록 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.369-371
• /
• 2007

This study suggests a modeling of grid-connected wind turbine generation system that has induction generator, and aims to perform simulations for outputs by the variation of actual wind speed and for fault current of wind generation system by the transformer winding connection. This study is implemented by matlab&simulink. The simulation shall be performed by assuming single line to ground fault generated in the system. Generator power, generator rotor speed, generator terminal current and fault current shall be observed following the performance of simulation. The fault current change will be dealt through the simulation results for fault current of wind generation system following the grid-connected transformer winding connection and the simulation result by the transformer neutral ground method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.10
• /
• pp.840-847
• /
• 2007

This Paper focuses on modeling and simulation to analyze the characteristic of hybrid vehicle. The system includes a proton exchange membrane fuel cell(PEMFC), photovoltaic generator(PV), lead-acid battery, motor, vehicle and controller. Main electricity is produced by the PEMFC and battery to meet the requirements of a user load. When vehicle is parked in a sunny place, extra power is generated by the photovotaics and is charged in a battery for next drive. Further we evaluate usefulness of this hybrid vehicle by using ADVISOR - the advanced vehicle simulator written in the Matlab/Simulink environment. According to simulation results, the extra power obtained by photovoltaics which have been explored in nature conditions can help to reduce the electrical load of PEMFC and increase the efficiency (over 21 %).

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.751-755
• /
• 2011

Electric Parking Brake(EPB) is the system operated by electric control actuator. It differs from the mechanical parking brake system which is operated by lever and pedal in need of human power. The EPB system is composed of DC motor, helical and differential epicyclic gear, screw, cables, and sensor. This paper describes about the EPB system mathematically and constructs a modeling of the EPB system using MATLAB/SIMULINK. Especially, SimMechanics library in SIMULINK is used to make each parts of system a module. By made modeling of the friction torque between bolt and nut. Cable tension can be maintained after the motor operating stops.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.307-309
• /
• 2008

This study suggests a modeling of grid-connected wind turbine generation system that has induction generator, and aims to perform simulations for outputs by the variation of actual wind speed and for fault current of wind generation system by the transformer winding connection. This study is implemented by matlab&simulink. The simulation shall be performed by assuming single line to ground fault generated in the system. Generator power, generator rotor speed, generator terminal current and fault current shall be observed following the performance of simulation. The fault current change will be dealt through the simulation results for fault current of wind generation system following the grid-connected transformer winding connection and the simulation result by the transformer neutral ground method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.655-660
• /
• 2010

As increasing the number of Electronic Control Units in a vehicle, the proportion for reliability and stability of the software is going increasingly. Accordingly, the traditional CAN network has occurred the situation that the requirement of developing vehicle software is not sufficient. To solve these problems, the FlexRay network which is ensured the high bandwidth and real-time is generated. However it is difficult to implement FlexRay based application software because of complex protocol than traditional CAN network. Accordingly the system for analysis and verification of network state is needed. Also vehicle vendor develops application software using Matlab/Simulink in order to increase productivity. But this development method is hard to solve the network problem of node to node. Therefore this paper implements Matlab/Simulink based FlexRay network system and verifies it through comparing with existing embedded system.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.226-227
• /
• 2019

본 논문에서는 마이크로그리드 시스템의 기존 교류 배전망에서 전력 전송 손실을 개선하기 위해 직류 배전망으로 설계하면서 전력을 저장하는 배터리부와 상기 배터리부로부터 LVDC망 전압을 사용자가 설정 및 설계한 전압에 대응하며 유지하기 위한 양방향 DC/DC 컨버터에 대해서 연구하였다. 기존에 사용하던 방식과는 다르게 슈퍼캐패시터를 추가하여 고속, 고출력의 충방전을 할 수 있으며, 이러한 특징으로 인하여 전력품질 개선과 비상시 전력을 공급할 수 있는 장접을 갖게 되었다. 제어기는 PI 제어기를 적용하였으며, PWM 게이팅 신호를 만들어 스위칭 소자를 제어하였다. 매트랩 시뮬링크를 이용하여 양방향 DC/DC 컨버터의 회로를 설계하고 구동 알고리즘을 적용해서 시스템을 구성하여, 슈퍼캐패시터를 이용한 양방향 DC/DC 컨버터의 역할 가능성을 시뮬레이션을 통하여 검증하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.287-293
• /
• 2010

본 연구에서는 개방형 로켓엔진시스템의 제어시스템을 구성하기 위한 선행연구로서, 시동특성을 예측하기위해 Simulink 모델을 구성하였다. 구성품별 동특성 모델을 바탕으로 로켓엔진시스템의 예측 프로그램을 구성하였으며, 대상으로 하는 시스템의 천이 작동상태에서의 동특성 변화의 예측과 더불어 그 모델링의 타당성 검증을 위하여 실제 개방형 로켓엔진 상사모델의 수류실험을 통해 실험적으로 측정하여 비교하였다. 또한 Simulink모델이 제어시스템을 구성하기위해 적합한지를 판단하기위해 기 수행된 천이 동특성 예측 프로그램의 결과와 비교하였고 검증하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.54-62
• /
• 2010

This paper describes the development of high fidelity air data processing algorithm which can be applied into an air data system for a high speed aerial vehicle. Unlike the previous air data system, current algorithm used several pre-determined pressure data which were obtained with computational fluid dynamic approach without using total pressures having enough sensor redundancy and fault detection ability. The verification of current algorithm was done by commercial software Matlab and Simulink.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.406-410
• /
• 2010

Current paper represents the air data acquisition and processing algorithm which can acquire the air data such as velocity and angle of attack by measuring the static pressure on the specific locations of a high speed aerial vehicle. Unlike the previous air data acquisition system, current system applied several pre-determined data obtained from computational fluid dynamic approach having enough sensor redundancy and fault detection ability. The verification of current algorithm was done by commercial software Matlab and Simulink.