• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.23-26
• /
• 2010

In this paper, we propose a new method for the design and implementation of a web-based 3D fashion shopping mall. Web 3D shopping mall is implemented by using a Web3D authoring tool, ISB, which provides easy mouse operation. 3D human models and cloth item model are designed by low polygon modeling method of 3D MAX. The designed 3D human models and cloth item model are exported to XML file. Finally, 3D human models and cloth item model are displayed and animated on the Web by using ActiveX control based on DirectX. We also implemented textile palette and mapped it to clothes model by using alpha blending during simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.5
• /
• pp.549-554
• /
• 2011

This paper presents the stabilization method for polynomial fuzzy large-scale system by using output feedback controller. Each sub system of the large-scale system is transformed into polynomial fuzzy model, and then output feedback controller is designed to stabilize the large-scale system. Stabilization condition is derived as sum-of-square (SOS) condition by applying the polynomial Lyapunov function. This condition can be easily solved by SOSTOOLS which is the third party of the MATLAB. From these solutions, output feedback controller gain can be obtained by SOS condition. Finally, a simulation example is presented to illustrate the effectiveness and the suitability of the proposed method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1129-1136
• /
• 2008

In this paper, a dual polarized broadband antenna fed by L-shaped strip for the Korea PCS band and W-CDMA band is presented. To analyze the characteristics of the designed antenna, we used commercial simulation tool(HFSS). The designed antenna was fabricated and measured using HP8753D vector network analyzer. The measured impedance bandwidth(VSWR<1.5) is 560 MHz and the measured average gain is 6.56 dBi. The measured isolation characteristic between two ports is -14 dB(min.) $\sim$ -40 dB(max.). These results are proper for the mobile communication application and repeater antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.648-651
• /
• 2001

This paper describes the 8-error-correction (204, 188) Reed-Solomon Decode. over GF(2$^{8}$ ) for a satellite communication. It is synthsized using a CMOS library. Decoding algorithm of Reed-Solomon codes consists of four steps which are to compute syndromes, to find error-location polynomial, to decide error-location, and to slove error-values. The decoder is designed using Modified Euclid algorithm in this paper. First of all, The functionalities of the circuit are verified through C++ programs, and then it is designed in Verilog HDL. It is verified through the logic simulations of each blocks. Finally, The Reed-Solomon Decoder is synthesized with Synopsys Tool.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.79-80
• /
• 2016

In this paper, we considered a design method for a microstrip patch antenna fed through two radiating edges by two feeding microstrip lines. Two feedlines are made to have a phase difference of 180 degree with each other in order to reduce cross-polarization level radiated from the antenna. The operation principle and design procedure for the considered antenna are explained using equivalent circuits. In order to check the validity of this study, the results for reflection coefficients of the antenna obtained by the proposed equivalent circuit method and the simulation using commercial antenna design tool are compared with each other.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.159-164
• /
• 2005

Recently, it has demanded high-speed digital circuits as information increase. Therefore, electromagnetic characteristics of compact microwave circuit occurred importantly. And, the effect of the imperfect ground plane on the signal integrity and influence of coupling between two parallel lines for high-speed digital transmission line on the printed circuit board is investigated by FDTD simulations in 3-D electromagnetic analysis method. The results of FDTD simulation are compared with the ADS simulation in commercial software, analyzed lumped element of modeling and electromagnetic wave's radiation of slot as frequency. As a consequence, when the slot in the ground plane is under microstrip line, it has much effect on propagation of wave.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.935-940
• /
• 2016

Directed energy weapon enables to radiate the concentrated energy so as to result in distraction and overload of the target electronics. Analysis on effectiveness of weapon system can be important consideration in order to determine performance and design weapon system. In this paper, air defense weapon system, which is one of directed energy weapon system is studied. In order to analyze the effectiveness, the reflector antenna with high power circularly polarized horn antenna is designed, and power density in axial effective area is simulated and calculated using Friis formula. Through the study, the validity of antenna system is verified, and the effectiveness of directed energy weapon system on the target is evaluated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.5
• /
• pp.567-574
• /
• 2014

In this paper, a VHF antenna with monopole structure is designed and fabricated for marine wireless communication applications. The proposed antenna is based on a monopole design, and composed of circular ring and meander structure for VHF operation which cover VHF frequency bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while covering the VHF bands. And measured characteristics of gain and radiation patterns are obtained for operating bands.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.2
• /
• pp.25-32
• /
• 2012

환경디자인은 건축, 도시, 조경 등 서로 다른 분야의 전문가 및 대상 지역 거주하는 일반시민 등 많은 참여자를 가지는 특징이 있다. 이러한 협조설계 단계에서는, 시행착오를 최소화시키기 위해서 디자인 초기단계에서부터 각 분야의 전문가들이 계획에 관해서 협의하여 디자인 내용을 변경해 나갈 필요가 있다. 또한 대상지 지역을 누구보다 잘 이해하고 있으며 계획 후 이 지역에 살게 될 주민들의 참여도 환경디자인 단계에서 고려해야 할 중요한 요소 중 하나이다. 여러 분야의 전문가 또는 비전문가들이 서로 커뮤니케이션하고 협조하기 위해서는 누구나가 쉽게 디자인 내용을 이해 할 수 있는 커뮤니케이션 툴이 필요하다. 이러한 필요성을 만족시키기 위해서는 빠른 구축속도, 대화형 기능, 빠른 표현속도, 사실적인 표현기술 등이 필수 조건이라고 할 수 있다. 본 연구에서는 이러한 환경디자인 분야의 전 분야에서 의사결정을 지원하고 디자인 안을 검토할 수 있는 3D CG 시스템을 개발하고 이 시스템을 실제 프로젝트에 적용시켜서 활용하면서 개발된 시스템의 기능강화를 추진하며, 실제 프로젝트 적용을 통한 시스템의 평가를 진행하여 본 연구에서 개발한 시스템의 유용성을 증명하는 것을 본 연구의 목표로 한다.

• Journal of the Korean Society of Safety
• /
• v.22 no.1 s.79
• /
• pp.30-35
• /
• 2007

With the rapid industrialization and civilization development, noise has become a major problem in cities and is a very serious issue for the environment. Noise induced in a factory has a bad influenced on operation efficiency, accuracy and detail of work. The purpose of this paper is to develop a new noise evaluation software for predicting acoustic condition including noise properties during the design of a factory. Majority of commercial softwares for this purpose have been developed in foreign countries and they are quite expensive and hard to use. A new home-made software tool has been developed in the present work, which aimed at providing a more user-friendly environment. The tool developed in this work consists of four major part; the prediction and evaluation of noise in system design, database design, noise analysis development and 3D graphic modeling. The outcome of present work is expected to provide domestic users with a more user-friendly and economic acoustic design tool.