• Smart Media Journal
• /
• v.12 no.2
• /
• pp.91-102
• /
• 2023

The Energy Management System (EMS) communicates with power plants and substations, monitors the substations and plant operational status of the transmission and substation system for stability, continuity, real-time, and economy of power supply, and controls power plants and substations. Currently, the power exchange EMS communicates with power plants and substations based on the serial communication-based Distributed Network Protocol (DNP) 3.0 protocol. However, problems such as the difficulty of supply and demand of serial communication equipment and the lack of installation space for serial ports and modems are raised due to the continuous increase in new facilities to perform communication, including renewable power generation facilities. Therefore, this paper presents a TCP/IP-based communication method instead of the existing serial communication method of the power exchange EMS, and presents a security risk analysis that may occur due to changes in the communication method and a countermeasure to the security risk.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.47-48
• /
• 2009

많은 개발자들은 프로세서 디버깅을 위해 GDB를 사용한다. 임베디드 시스템에서 GDB의 원격 디버깅은 시리얼 통신을 사용한다. 그러나, 시리얼 통신은 속도에 제한이 있으며, 시리얼 포트 마저 점차 사라져 가는 추세이다. 이를 극복하기 위해 많은 임베디드 시스템이 JTAG 인터페이스를 탑재하고 있으며, USB 인터페이스를 사용하여 통신을 한다. 이 논문에서는 EISC 아키텍처 기반의 임베디드 시스템을 디버깅하기 위한 USB-JTAG 인터페이스 개발 방법을 제안하고, GDB 환경에서의 USB 인터페이스 구축 방법과 디버깅 패킷을 분석하기 위한 JTAG 모듈의 개발 방법을 소개한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.131-134
• /
• 2024

본 논문에서는 기존 철도 운영 및 관리시에 철도 주변환경으로 부터 발생하는 소음, 진동, 미세먼지 센서에서 다양한 실시간 스트림 데이터를 감지하고 정형화된된 데이터 패턴을 인식하고 분석할 수 있도록 데이터를 구성 및 저장하고 분석된 데이터를 표현할 수 있도록 시각화 지원을 위한 모니터링 시스템 플랫폼을 구현하였다. 데이터 전송을 위해 시리얼 통신 기법을 주로 적용하였으나, 센서와 디바이스의 증가로 인해 시리얼 통신의 한계가 나타났다. 따라서, 본 연구에서는 기존의 아두이노와 서버 간의 직접 통신 방식 대신 라즈베리파이를 도입하여 MQTT Broker(브로커)를 설치하고 통신을 진행하였다. 철도 데이터 모니터링 시스템 플랫폼은 NoSQL 데이터베이스인 MonGoDB와 데이터 시각화할 수 있는 Grafana를 이용하여 구축하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.202-204
• /
• 2021

The Internet of Things (IoT) is a term first used by Kevin Ashton, director of MIT's Auto ID Center, in 1999, and refers to the connection of things to the Internet. Bluetooth, one of the wireless networks, is a technology developed as an industry standard for personal short-range wireless communication first developed by Ericsson in 1994. Since the Raspberry Pi has Bluetooth built-in, a wireless network is possible. This paper implements a module for the Internet of Things by implementing serial communication in the Bluetooth built-in Raspberry Pi 3 B+. There was a problem that Bluetooth communication was impossible between raspberries, so the discovery function was activated and serial communication was added to successfully link the communication.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.427-436
• /
• 2018

HADAX is a serial communication converter of train control computer. It is connected with various signal equipments such as wayside signal equipments, station signal equipments, train control computers, and transmits control information and signal condition information for train control. And transmits information to several electronic interlocking devices through a splitter interface. Since HADAX interfaces with many signaling devices through serial communication, frequent communication connection faults necessitate improvement of performance such as dual system configuration, integration of external splitter, and multi-channelization of communication card. The improved HADAX device should have compatibility with the dimensions of existing enclosure and enclosure, and verify the performance of dual system and splitter integration. Therefore, we verified the performance of HADAX through the route control test, dual system test, and multi-channel communication test with splitter integrated connection by connecting with the existing signal equipment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.481-487
• /
• 2014

In this paper, we have proposed gigabit serial transceiver based on backplane architecture at the satellite communication digital transponder. The transponder supports the full combinational switching function with broadband multi-channel using programmable device - Xilinx space-grade Virtex-5 FPGA. In order to implement the switching function, GTX transceiver solution inside Virtex-5 FPGA is used. Also hardware implementation is simple because of no additional component. In order to use a GTX transceiver, signal integrity(SI) simulation of PCB design is essential. We investigate the characteristics of the S-parameter, eye diagram, channel jitter of GTX transmission line and conform that GTX Transceiver operates without error. Finally the proposed PCB design will be utilized at satellite communication digital transponder EQM-2(Engineering Qualification Model-2).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1380-1386
• /
• 2011

The request of interrupt accompanies a context switching. If the interrupt is frequently requested, this overhead of context switching can reduce seriously the performance of embedded systems. In order to reduce processing overhead due to frequently requested communication interrupts at Asynchronous Serial Communication, this paper introduces the method of Expanded Asynchronous Serial Communication with the Interrupt Coalescence(IC) that accumulates a fixed number of interrupts and processes them in one time. we implement the existing Asynchronous Serial Communication that requests communication interrupts by one byte at an LN2440SBC embedded board with a uC/OS-II and compare interrupt processing time for the performance evaluation about proposed method. As a result, the communication interrupt processing time of proposed method appears in case of low speed(9,600 bps), the decline of an average 25.18% at transmission, the decline of an average 41.47% at reception. and in case of hight speed(115,200 bps), the decline of an average 16.67% at transmission, the decline of an average 25.61% at reception.

• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.153-158
• /
• 2010

Most of software developers use the GNU Debugger (GDB) in order to debug code execution. The GDB supports a remote debugging environment through serial communication. However, in embedded systems, the speed is limited in the serial communication. Due to this reason, the serial communication is rarely used for the debugging purpose. To solve this problem, many embedded systems adapt the JTAG and the USB interface. This paper proposes debugging environment via USB-JTAG interface to debug the EISC processor, and introduces how the USB interface works on the GDB and how the JTAG module handles debugging packets.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.179-186
• /
• 2007

KTX control systems mutually control OBCS, ATC, MBU, TECA, MDT, ABU, HVAC, TRAE, PID and FDTR, KTX OBCS as master, and controls other sub-control devices as slave, using various serial lines. In order to analyze physical structure of various serial link lines and mutual data transmission structure, serial line analyzer is used in many ways. To use serial line analyzer, prior and professional technics about High Speed Train and experience of using device are necessary. In spite of difficult situation of space and environment where we work for maintenance of High Speed Train, in presenting basic structure about physical connection method aquired by sub-device serial line data collection and about communication data analysis, I hope that this research will be helpful for the person who work for similar area. Also, I hope that this research will help diagnostic work of High Speed Train, which is necessary for test run of independently developed High Speed Train.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.91-93
• /
• 2002

인터넷의 대중화로 인해 많은 SOHO 창업이 이루어지고 있다. 기존의 대기업을 상대로 한 사무용기기, 통신기기가 SOHO를 상대로 개발되고 있었으며, 이에 국선과 내선 또는 내선 사용자 상호간을 연결시켜 주는 중소형급 PBX가 통신비 절감 및 수익의 창출을 가져왔다. 본 논문에서는 이러한 PBX의 상태를 시리얼 통신을 통해 실시간으로 보여주는 모니터링 시스템을 설계 및 구현하였다. 구현된 시스템은 전송된 데이터를 통해 PBX와 연결된 국선과 내선의 상태, 발신자 정보를 서버 클라이언트 구조로 내선 사용자의 PC에 나타냄과 동시에 통화내역을 데이터베이스로 관리할 수 있게 하였다.