• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.239-247
• /
• 2005

In this study, we have used newly developed dual-beam shearography which is based on laser speckle that includes various information about an object. Among the several shearing techniques, we used Michelson shearing interference technique which is the most powerful. Acrylate plate was used as a sample, which has inner defects and low thermal conductivity. Michelson shearing interferometer was used for obtaining speckle fringes. We also used phase shifting technique to get a phase map. Using single beam illumination, we could obtain mixture of deformation components of both in-plane and out-of-plane. In order to separate the two components, we have used dual-beam shearography technique. We have obtained a speckle pattern of both before and after deformation. Through LS filtering and unwrapping processes, we could find a position and a shape of the inner defects easily. Deformation of the acrylate plate due to thermal heating has occurred mainly in z-direction(out-of-plane) because it has low thermal conductivity. The acrylate plate was deformed only at the restricted area where the electrical heat applied.

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.400-407
• /
• 2008

An Instrument to measure normal spectral emissivity is built using a Fourier Transform-Infrared (FT-IR) spectrometer. The instrument is composed of four main parts, reference blackbody, sample furnace, optics system, and FT-IR spectrometer. Measurement ranges of temperature and wavelength are $200^{\circ}C{\sim}500^{\circ}C$ and $3.5{\mu}m{\sim}20{\mu}m$, respectively. Measured emissivity of the reference blackbody is greater than 0.9993 with combined relative uncertainty less than 0.69%, which can be considered an ideal blackbody. We studied the emissivity of opaque alumina, graphite, anodized aluminum, and steel (IMS 200). It is shown that emissivity increases with the roughness of the steel (IMS 200) surface.

• Korean Journal of Veterinary Research
• /
• v.43 no.3
• /
• pp.393-398
• /
• 2003

Simple and rapid sample preparation method for trace elements in foods of animal origin using ultra high pressure microwave digestion system (UHP/MDS) and inductively coupled plasma atomic emission spectrometer (ICP/AES) were developed. 1. For the digestion of sample using UHP-MDS, 20% nitric acid (v/v) was the most suitable solvent for the determination of trace elements in foods of animal origin. 2. The optimal digestion conditions for UHP-MDS were as follows: final temperature $180^{\circ}C$, final pressure 400 PSI, and magnetic power 900 W in the solid sample. For the liquid sample final temperature $170^{\circ}C$, final pressure 300 PSI and magnetic power 700 W were optimal conditions. 3. As result of interlaboratory test, the average recovery rate of the for solid sample were 88.3~99.1% for As, 82.4~93.3% for Cd, 89.2~101.2% for Hg and 86.5~93.8% for Pb, respectively. In liquid sample, it were 87.0~96.8% for As, 80.9~96.6% for Cd, 87.5~91.2% for Hg and 91.4~95.5% for Pb, respectively. 4. The average coefficient variation rate were 3.3~15.9% for solid sample and 2.9~10.8% for liquid sample.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.15-19
• /
• 2002

The pretreatment of tungsten added $BaTiO_x$ ceramics was performed to improve the recovery of Ba, Ti and W. $BaTiO_x$ ceramics were digested with HF : HCl ( 1 : 2 ) mixture in an acid digestion bomb at $220^{\circ}C$ for 3 hrs. The concentration of Ba, Ti and W were determined by ICP-AES. Recoveries of Ba, Ti and W were 99.6%, 99.8% and 99.2%, respectively. And their C.V. values were 1.02%, 0.73% and 1.79%. Using this method, the analytical results of Ba, Ti and W for a real sample were obainted to be 25.9% (w/w), 38.8% (w/w) and 3.31% (w/w), respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.256-259
• /
• 2004

[ $V_2O_5$ ] 나노선의 구조 분석을 위해 STM(Scanning Tunneling Microscopy)과 TEM(Transmission Electron Microscopy)을 이용하여 단일 $V_2O_5$ 나노선의 이미지를 얻었다. $V_2O_5$ 나노선은 상온에서 ammonium metavanadate$(NH_4VO_3)$와 양이온 교환수지$(DOWEX50{\times}8-100)$를 2차 증류수에 섞어 합성하였다. STM 시료는 3-APS(3-aminopropyltriethoxysilane)를 전 처리한 실리콘 기판에 $V_2O_5$ 나노선을 올려 만들었고, TEM 시료는 200 mesh/copper 그리드에 침전시켜 준비하였다. STM과 TEM의 결과로부터 $V_2O_5$ 나노선의 기하학적 단면이 $1.5nm{\times}10nm$에 거의 근사하는 것을 확인하였으며 두 이미지의 비교를 통해 $V_2O_5$ 나노선의 표면상태에 대해 논의하였다.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.731-735
• /
• 2000

The acid digestion bomb pretreatment method for the determination of antimony in a commercial fire retardant material sample (DBDPE-$Sb_2O_3$) was studied. DBDPE-$Sb_2O_3$ sample was digested with $H_2SO_4:HCl$(1:2) mixture in digestion bomb at $220^{\circ}C$ for 2 hrs. and antimony was determined by atomic absorption spectrophotometry. Recovery of 99.6-99.8% and C.V. of 0.94-1.07% for Sb was obtained for spiked real samples. In the present method, the analytical results obtained for antimony were 40.3 and 36.3% (w/w), respectively.

• Journal of the Korean Chemical Society
• /
• v.37 no.7
• /
• pp.642-647
• /
• 1993

Monolayers of pure surfactant squaraine, DSSQ(4-distearyl amino phenyl-4'-dimethylaminophenylsquaraine), were deposited on $SnO_2 $ electrodes by the Langmuir-Blodgett film technique. The DSSQ film exhibits ${\lambda}_{max}$ at ∼530 nm. The absorption is significantly red-shifted from the solution of DSSQ (633 nm in chloroform), suggesting that the squaraine chromophores form aggregates in the LB film. The photogeneration of the squaraine aggregates is studied by measuring the photocurrents in photoelectrochemical cells consisting of the squaraine of the aggregates is found to parallel its absorption spectrum and quantum efficiency as high as 0.3% has been observed. While the photocurrent was attenuated exponentially when stearic acid layers (up to 8 layers) are inserted between the squaraine layer and the electrode, it is nearly extinguished when the squaraine layer is over-coated with 2 layers of stearic acid. A model for the observation is proposed and the roles of the electrolytes and oxygen on the photogeneration process will be discussed.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.165-168
• /
• 2006

Fourier transform-near infrared spectroscopy (FT-NIRS) was evaluated for determination of total dietary fiber (TDF) content of brown rice. Enzymatic-gravimetric method was suitable to obtain reference values for calibration of NIR at 1,000-2,500 nm range. Standard error of laboratory procedure ranged 0.17 to 0.72%. Partial least square (PLS) regression was used to develop the calibration equations. Regression was performed automatically using NIRCal chemometric software. Accuracy of prediction model for TDF content was certified for regression coefficient (r), standard error of estimation (SEE) and standard error of prediction (SEP), showing 0.9780, 0.0636, and 0.0642, respectively. This prediction model can be used for determination of TDF in brown rice and would be useful for real-time analysis in food industry.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.143-150
• /
• 2010

Vitrification technology has been gradually recognized as one of effective solidification methods for concentrated boric acid wastes generated in PWR. Vitrification for low- and intermediate-level radioactive wastes has a large volume reduction and good durability for the final products. A feasibility study for the vitrification of concentrated boric acid wastes has been performed with developing the pre-treatment methods of powdered wastes, glass compositions using glass formulation and demonstration test. The pre-treatment method is pelletizing the powder type for stable feeding within cold crucible melter. The glass compositions should be developed considering molten glass are related with wastes reduction. High contents of sodium and boron within borate wastes give influence to waste loading. A variety of factors obtained from the demonstration test are reviewed, which is wastes feeding rate, off-gas characteristics on stack and glass characteristics of final products such as durability for implementing the wastes disposal requirement. The aim of this paper is to present the feasibility of vitrification and review the solidification method for concentrated boric acid wastes and obtain the physicochemical characteristics of solidified glass.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.250-250
• /
• 2019

현재 우리나라에서 이용하고 있는 소류사량 직접계측방법에는 Arnhem 소류사 채취기와 Helley-Smith 소류사 채취기 등이 있다. 하지만 이러한 방법은 현장에서 계측하기가 매우 어렵고 많은 비용과 인력, 시간이 소모되며 특히 연속적인 계측이 어려워 소류사량의 직접계측자료를 기초로 하는 연구는 거의 전무한 상태이다. 이에 대한 대안으로 최근 국내외에서는 마이크로폰을 내장한 금속관에 토사가 충돌 시 발생하는 음향데이터를 수집 및 분석하여 소류사량을 계측하는 간접계측방법 하이드로폰을 사용하고 있다. 하이드로폰 시스템의 대부분이 증폭채널방법을 사용하고 있는데 이러한 방법은 개별입자에 대한 음향특성을 반영하기에는 다양한 크기를 가지는 소류사 입자에 대한 음향신호를 하나의 임계치 기준으로 필터링 하기 때문에 한계가 있다. 즉 기존의 방법은 소류사량의 상대적인 크기만 추정할 수 있을 뿐 소류사량을 정량화할 수 없다. 따라서 본 연구는 소류사가 이동할 때 발생하는 충돌음향을 신호 처리하여 소류사량을 추정하는 계측기기인 하이드로폰을 이용하여 기존 소류사량의 계측 방법을 개선하기 위한 실험적 연구를 수행하였다. 실험은 하이드로폰을 적용한 수리모형 실험 장치를 구축하고 현장에서 취득한 시료 중 대표시료로 분류된 두 가지 입자에 대해서 수리 조건 변화에 따른 충돌음향을 계측 및 분석하였다. 연구결과 입자크기 및 수리조건 변화에 따른 하이드로폰의 인지특성을 파악할 수 있었고 소류사 충돌음과 연관성 높은 주파수 대역을 분리하여 소류사 충돌음을 판독할 수 있는 계측알고리즘을 제시하였다. 특히 본 연구에서 제안하는 하이드로폰 충돌음향 분석법 B-P Method는 낮은 유속과 작은 입경의 소류사의 조건일 때 타 방법에 비해 제안된 B-P Method가 높은 판독률을 보여주었다.