• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.15-23
• /
• 2008

A numerical method based on the prediction of total pressure loss of major components of the engine has been developed for prediction of the windmilling start performance of micro-turbojet engine. The start performance in on/off design region has been analysed by applying this method to predict windmilling start-able regions of the centrifugal-type engine. The results of this analysis have been validated by comparing with the test data. The effect of each design parameters on windmilling start performance has been analysed for the enlargement of start-able regions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.319-322
• /
• 2007

A numerical method for prediction of the Windmilling start performance of micro-turbojet engine has been developed. The method incorporates the available loss correlations and analyses for the estimation of the performance of the major engine components. It has been applied to the micro turbojet engine with the mixed type compressor. The starting performance characteristics on the on/off-design regions have been analysed. Additionally, the sensitivity of each design parameter which has an effect on Windmilling start performance has been analysed.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.9-20
• /
• 1980

디이젤기관의 냉시동성이 가솔린기관에 비하여 떨어지는 것은 이미 우리가 알고 있는 사실이다. 근년에는 소형트럭, 승용차, 소형건설기계 등의 분야에 있어서도 고속디이젤기관을 널리 사용하게 되었고 앞으로 디이젤연료의 중질화 및 세탄가 저하의 영향 등을 고려할 경우 시동성의 확보는 더욱 중요한 문제로 된다. 시동성에 영향을 미치는 인자 혹은 시동성개선의 방책으로서는 분 무의 착화에 직접 관련되는 것 외에 축전지의 저온특성 혹은 기관의 마찰토오크 등 여러가지에 걸쳐 있으나 이들 중에서 특히 분무의 착화에 직접 관련되는 방책에 관해서는 그것이 시동성에 미치는 영향에만 그치는 것이 아니고 시동개시직후에 있어서 배출가스, 혹은 출력성능 등에 미 치는 영향에 대해서도 함께 고려를 하여야 할 경우가 있다. 본고에 있어서는 냉시동시의 분무의 착화에 대하여 직접 관련하거나 그것을 촉진시킨다고 생각되는 몇개의 인자와 구체적인 방책을 취급하므로써 그것들이 시동성 및 시동직후의 청백연 혹은 출력성능 등에 대하여 미치는 영향에 대해서 기술하며 아래에서 취급되는 시동시의 착화를 촉진하기 위한 실제적인 인자 및 방책은 어느 것이나 기본적으로는 하나의 개념에 집약된다. 즉 그것은 연표와 효소로부터 이루어지는 연소계에 있어서 착화조건을 갖추어야함을 말할 것도 없다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.161-161
• /
• 1996

본 연구에서는 차량(승용차) 시동용 수퍼캐패시터-밧데리 조합시스템에 적용할 시작품 전기이중층 수퍼캐패시터(super-capacitor:SC)를 설계 제작 개발하고 그 성능 특성을 확인하였다. 재래식의 차량용 밧데리의 비동력(specific power)이 100~200 W/kg에 비하여 전기이중층 SC의 경우는 1,000~3,000 W/kg으로 단위 총량당의 동력이 매우 크다. 또한 충방전시의 화학반응이 없는 관계로 인하여 충전식 2차 전지에 비하여 사용수명이 매우 길다. 이러한 SC를 기존의 밧데리와 함께 조합하여 차량 시동용으로 사용하게 되면 밧데리의 사용수명을 2~3배 길게 할 수 있으며 밧데리는 시동에 필요한 큰 전류의 방전이 요구되지 않으므로 그 용량과 크기가 대체로 절반이상 줄어든다. 또한 매우 낮은 온도의 기후조건에서는 밧데리의 방전효율이 급격히 저하되므로 이를 대비하여 필요 이상의 과용량, 과중량 밧데리의 사용이 실제로 행해지고 있으나 조합시스템의 차량 시동시에는 SC가 갖는 특성상 -5$0^{\circ}C$까지의 기후조건에서도 방전효율이 크게 저하되지 않은 채 시동전류를 공급해주므로 혹한지역이나 혹한시의 차량시동에도 탁월한 시동성능을 갖는다. 설계 제작된 SC는 저장에너지 6KJ, 정격전압 12Volt, 설계축전용량 70F 그리고 사용은 도 범위가 섭씨 영하 25도에서 영상 50도이며 무공해성 수용성 전해질을 사용하였으며, 제작된 CS는 사용온도 범위에서 축전용량 65F - 85F, 내부저항 1.8mOhm - 5.2mOhm의 변화를 보였으며, 정상시동에 필요한 방전전류 300Amp의 경우 2.6초의 방전시간, 약 89%의 방전효율을 보였다. 현재까지 상온하에서 30.000회의 충방전 시험결과로서는 방전효율의 저하가 없는 양호한 성능을 보였으며, SC의 시범 작동시험을 실차(소나타 1800cc)에 장착하여 수행한 결과 20회 이상의 연속시동에서도 아무런 문제점 없이 잘 동작하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.18-24
• /
• 2017

Appropriate selection of the starter is essential for successful starting of the gas-turbine engine. Thus, aerodynamic drag during starting phase should be analyzed to assess the feasibility of the starter. In this paper, aerodynamic drag is modeled based on the speed profile from the engine coast down test, and it is scaled with respect to the target engine by comparing the compressor load. Afterward, the govern equation of the starting phase is developed with the torque model of the starter, and the design scheme to select the feasible starter will be finally suggested. The proposed model of starting phase will be useful to perform a preliminary design of the starting system of the gas-turbine engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.58-66
• /
• 2019

In this study, the start-up characteristics of a staged combustion engine were analyzed numerically based on relational equation modeling of the entire engine components. The start-up characteristics were extensively analyzed considering the transient period of the total engine system from the start-up sequence till the steady-state of the engine. The performance characteristics of the engine components such as RPM of engine power-pack, chamber pressure and O/F ratio of pre-burner, and mass flow of propellants in the start-up period were investigated. Furthermore, the calculated engine data were compared satisfactorily with the experimental data. Through the comparison of data, successful validation of present engine start-up analysis has been obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.40-46
• /
• 1999

Aerodynamic performance and starting characteristic of wind turbine blade are important factors that determine the whole system as rated power, operating method, etc. Therefore, starting characteristic according to aerodynamic performance, wind speed and blade pitch angle should be examined while wind turbine blade is designed. In this study, the aerodynamic analysis program of 750㎾ class horizontal axis wind turbine blade was developed and to certify this program, the aerodynamic performance of the commercialized blade was analyzed with it. The analysis result was corresponding to the value presented from manufacturer. And the starting analysis program was developed on the basis of the developed aerodynamic analysis program and starting analysis was performed. As a result, it was confirmed that variable speed operation and variable pitch control are profitable to wind turbine used in low wind speed as our country.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.321-327
• /
• 2008

Performance characteristics of the axi-symmetric supersonic exhaust diffuser (SED) with a second throat are numerically investigated. Computational strategy repeats those for a straight exhaust diffuser with zero-secondary flows. Renolds-Average Navier-Stokes equations with a standard ${\kappa}-{\varepsilon}$ turbulence model incorporated with standard wall function are solved to simulate the diffusing evolutions of the nozzle plume. The methodology is validated with accuracy. To predict the improvement of starting performance by second throat diffuser, diffuser characteristic curve due to the SED equipped with the second throat is speculated with respect to that of a straight area type as a function of nozzle stagnation pressure. Principal physics caused by the of the second throst is also addressed in terms of a second throat area ratio.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.15-22
• /
• 2011

Unlike most aerodynamic wind-tunnel, Scramjet Engine Test Facility(SETF) of Korea Aerospace Research Institute should simulate enthalpy condition at a flight condition. SETF is a blow-down type, high-enthalpy wind tunnel. To attain a flight condition, a highly stagnated air comes into the test cell through a supersonic nozzle. Also, an air ejector of the SETF is used for simulating altitude conditions of the engine, and facility starting. SETF has a free-jet type test cell and this free-jet type test cell can simulate a boundary layer effect between an airplane and engine using facility nozzle, but it is too difficult to predict the nature of the facility. Therefore it is required to understand the starting characteristics of the facility by experiments. In this paper, the starting characteristics of the SETF and modifications of the ejector are described.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.451-458
• /
• 2010

Unlike most aerodynamic wind-tunnel, Scramjet Engine Test Facility(SETF) of Korea Aerospace Research Institute should simulate enthalpy condition at a flight condition. SETF is a blow-down type, high-enthalpy wind tunnel. To attain a flight condition, a highly stagnated air comes into the test cell through a supersonic nozzle. Also, an air ejector of the SETF is used for simulating altitude conditions of the engine, and facility starting. SETF has a free-jet type test cell and this free-jet type test cell can simulate a boundary layer effect between an airplane and engine using facility nozzle, but it is too difficult to predict the nature of the facility. Therefore it is required to understand the starting characteristics of the facility by experiments. In this paper, the starting characteristics of the SETF and modifications of the ejector are described.