• 월간 기계설비
• /
• no.5 s.214
• /
• pp.32-33
• /
• 2008

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.6
• /
• pp.5-11
• /
• 2013

Because the regulation for a noise and a vibration in our country has been being reinforced more and more, a more environment-friendly pile construction method than a current low-noise and low-vibration method was needed for the close construction in the downtown area. In this study, the characteristics of a screw concrete pile method for noise and vibration-free method was explained, and it's vertical bearing capacity was studied in the base of the static pile load test data of the screw concrete piles. Constructed by two methody; a pre-digging shoe type construction method and a toe-jetting shoe type construction method. The vertical load bearing capacity of a screw pile constructed by the former was more about 70% than that of a screw pile constructed by the latter.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.279-284
• /
• 2001

The owner's evaluation system about the contractor's work performance is used to give the contractor some advantages or disadvantages. According to the result of evaluation of the contractor's performance in the given construction project, the owner identify the good contractors and give them some merits in the future project bidding. However, the system used in the Korean construction industry has caused many problems and has been operated improperly. As a case study, this paper investigates the current problems existed in the KNHC (Korean National Housing Corporation) evaluation system and suggests some directions for its efficient operation. In doing so, the study performed interviews with the KNHC officers and the related contractors, using a structured questionnaire

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.3
• /
• pp.363-375
• /
• 2019

Since the double-deck tunnel is deeply constructed in the city, it is necessary to secure the installation space of air supply and exhaust, escape passage stairs, elevator, distribution facilities and connection tunnels in the vertical shaft for the double-deck tunnel. Also, in order to minimize the effect of construction on adjacent area, it is necessary to construct the concrete structures at high speed in vertical shaft after tunnel excavation. Therefore, the slabs and the stairs in vertical shaft are needed to be constructed using precast concrete, and the rapid construction techniques of bracket for supporting the inner precast structure are needed. The bracket installation methods include cast-in-place concrete, precast concrete and steel. In this study, the improvement of the steel brackets with good economical efficiency and good workability was carried out in consideration of the improvement of the construction speed. We have developed a new bracket that is optimized through bracket shape improvement, anchor bolt position adjustment and quantity optimization. As a result of the structural performance test, it was confirmed that the required load supporting capacity was secured. As a result of structural performance test for bar type anchor bolt and bent anchor anchor bolt, it was confirmed that the required load carrying capacity was secured and that the load bearing capacity of bent anchor bolt was large.

• 한국정보교육학회:학술대회논문집
• /
• 2007.01a
• /
• pp.335-343
• /
• 2007

수학적 지식과 능력을 활용하여 생활 주변의 여러 가지 문제를 해결하는 능력의 신장이야말로 수학교육의 목표이자, 수학 학습의 근본적인 이유가 된다. 그러나 문제해결 능력이 가장 많이 필요한 문장제 문제해결과, 문제 푸는 방법 찾기 단원을 학생들은 해결하기 어려워한다. 다른 단원보다 명확하게 식을 찾을 수 있는 연산 문제들과 다르고, 책에 제시되어 있는 방법을 쉽게 사용을 하지 못하며. 그 문제의 의미를 이해하지 못한다. 그래서 문제를 푸는데 즐거움을 느끼지 못한다. 이에 본 연구는 문제 푸는 방법 찾기 단원을 중심으로 문제해결 능력 신장을 위한 교수 학습 시스템 설계를 목적으로 학습의 과정별, 특성별, 연계별 학습 내용을 고려하여 학년 통합, 내용 통합하여 재구성하였다. 그리고 교수-학습 모듈, 평가 모듈, 상호작용 모듈로 시스템을 구성하였다. 시공간의 제약을 극복하여 학습자들의 수준에 적합한 개별화 학습을 제공하고, 웹을 이용한 문제 만들기 활동을 통하여 학습에 자신감을 기르고, 또한, 자기주도적 학습 능력을 향상시키는 계기가 될 수 있을 것으로 기대된다.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.196-206
• /
• 2003

In order to investigate the workability of Raise Boring Machine(RBM) such as utilization, penetration rate and advance rate, a vertical shaft of 98 m in length and 3.05 m in diameter was constructed in the layer of conglomerate by using the RBM in this study. In addition, field data from tow different construction sites including water-pump power plant tunnel, roadway tunnel and mining tunnel by RBM were collected and analyzed. The results show that the average weekly bored length is 19.3 m and its average utilization is between 54.3 % and 75.1 % very higher than that of the TBM(Tunnel Boring Machine). It also turns out that the bit force increases linearly with respect to the increase of the RPM(revolution per minute) of RBM. However, the net penetration rate decreases with the increase of bit force, RPM of RBM and depth of shaft. The findings of this study can be used to provide the useful information for the design of shaft and the selection of RBM.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.1
• /
• pp.106-112
• /
• 2022

Additive manufacturing (AM, also known as 3D printing) technology gets attention for various effects in the construction industry. It reveals abilities of process automation, high traceability of resource management, construction period precision improvement, and worker safety. However, unlike the existing construction technology, the development of AM construction process causes trial errors and unpredictable accidents. In the present study, the construction AM process is designed for on-site construction, and it performs with empirical tests. Also, we analyzed the causes of qualitative experimental results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.7-8
• /
• 2011

The use of foreign labors was inevitable at the construction site in Korea. Most construction companies are being used them in the workplace due to the cheap labor, but their work ability are insufficient as much as Korean labors. In this paper is expected to confirm the foreign labors' employment conditions and study to analyze the changing of foreign labors' work ability.

• 월간 기계설비
• /
• no.10 s.195
• /
• pp.63-67
• /
• 2006

1973년 창업한 (주)대우건설은 IMF 이후 지난 2000년 그룹 해체와 WORKOUT에 들어가는 어려움을 겪었다. 그러나 전 임직원이 일심단결 해서 어려움을 슬기롭게 극복하여 2005년에는 수주 8조, 1,900억원, 매출 5조 756억원, 영업이익 4,315억원으로 업계최고의 실적을 올렸다. 또한 최근 발표한 2006년 시공능력평가에서 드디어 1위로 등극해 명실상부한 최고의 건설사로 올라서는 쾌거를 달성했다. (주)대우건설은 건축, 주택, 토목, 플랜트, 해외사업 등 건설 전 분야에서 업계최고의 실적을 유지하고 있다. 특히 주택 분야에서는 푸르지오의 브랜드를 앞세워 5년 연속 주택 공급 1위의 실적을 자랑하고 있다. 2006년 (주)대우건설은 업계최고의 기술력과 영업경쟁력, 우량재무구조를 바탕으로 수주8조 5,000천억 매출 5조 5,826억원의 경영목표를 세웠으며, 이를 위해 전 임직원이 「도전과 열정」, 「자율과 책임」의 핵심 가치를 바탕으로 오늘도 매진하고 있다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.425-428
• /
• 2010

시공의 용이성과 저렴한 시공비로 간단하게 설치가능한 단동형 파이프하우스는 기상이변으로 인하여 농업생산에 큰 피해를 발생시키며 동시에 농업 생산기반 자체를 위협하고 있는 실정이다. 따라서 폭설에 의한 파이프하우스의 피해를 줄이기 위해서는 실제 붕괴된 피해사례의 정확한 원인분석이 필요하다. 따라서 본 논문에서는 간략화법을 이용한 극한해석을 통해 파이프하우스의 붕괴원인 분석 방법을 개발하여 실제폭설에 의한 피해사례를 적용하여 실제 붕괴하중을 검토하였다.