• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.295-299
• /
• 2004

본 논문에서는 주기 비안정 연속계의 해석을 위한 주파수 방법이 제안된다. 비안정시스템의 안정화를 위한 기존의 주파수 해석법을 일부 수정하여 연속계를 포함한 비안정 시스템에 적합하도록 수정하였으며, 직류모터와 동기발전기로 구성되어 있는 전기-기계 시스템에 적용하여 유용성을 보였다. 복잡한 비안정 연속계의 문제를 각 요소별 주파수 응답을 분리하고 조합하는 작업들을 통하여 쉽게 풀 수 있음을 보였다. 모터-발전기로 구성되어있는 전기-기계 시스템에서 발전기의 상호유도인덕턴스의 시간에 따른 주기적 변화와 장선(long electrical line)의 부하가 시스템의 불안정성을 야기함을 보였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.36-43
• /
• 2000

Three-Dimensional FDTD method is applied to analyze the dielectric resonator coupled with two microstrip lines. We model accurately the curved surface using Noriaki model. The frequency resolution is 106.46 MHz by the conventional FFT However it is not sufficient for determining its resonant frequency. So we introduce the Pad approximation and Stoer-Bulirsch method in order to have the high frequency resolution degree, 1.00 MHz. All results are compared with the measured data. As a result, we acquire the very precise result through the Pad approximation. And sinusoidal wave is applied. From the plot of the electric and magnetic field distribution, it is shown that the resonant mode is TE$_{01{\delta}}$ mode.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.11
• /
• pp.28-33
• /
• 2002

In this paper, the impedance-tuned monopole microstrip antenna designed for PCS is analyzed using finite difference time domain(FDTD) method. The perfectly matched layer(PML) absorbing material condition proposed by Berenger is used for the truncation of finite difference time domain lattice. A Gaussian pulse is selected as an excitation signal and a resistive voltage source model is used to reduce the error caused by the reflection waves. The FDTD method is inherently a near field technique. Therefore, the near field to far field transformation is need to compute far field antenna parameters such as radiation patterns and gain. The near field to far field transformation can be done both in the time domain and the frequency domain. We use the frequency domain transformation to compute the far field radiation patterns at single frequency. All the numerical results obtained by the FDTD method are compared with simulation results using the HFSS software. Good agreements are obtained in all cases.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.290-295
• /
• 2004

In this study, the pressure vessel piping with corrosion used during long term were investigated from the time-frequency analysis method. The damage of piping could be evaluated the attenuation factor by ultrasonic parameters such as center frequency and echo waveform. Based on NDE analysis by time-frequency analysis method, it should also be possible to evaluate from various damages and defects in piping members.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.396-396
• /
• 2000

Three-Dimensional FDTD method is applied to analyze the dielectric resonator coupled with two microstrip lines. We model accurately the curved surface using Noriaki model. The frequency resolution is 106.46 MHz by the conventional FFT However it is not sufficient for determining its resonant frequency. So we introduce the Pad approximation and Stoer-Bulirsch method in order to have the high frequency resolution degree, 1.00 MHz. All results are compared with the measured data. As a result, we acquire the very precise result through the Pad approximation. And sinusoidal wave is applied. From the plot of the electric and magnetic field distribution, it is shown that the resonant mode is $TE_{01{\delta}}$ mode.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.1
• /
• pp.27-33
• /
• 2016

A numerical analysis on deck wetness is carried out for a large caisson directly wet-towed by tugs in irregular waves. A constant panel method is used for linear analysis in frequency domain and a statistical post-processing for the deck wetness is presented. Hydrodynamic coefficients obtained from the frequency domain computation are imported for time domain analysis which enables complete modeling for towing equipment, environment, etc. Both frequency and time domain computations over two sea states are performed and comparison is made. In the time domain analysis, towing systems of various arrangements of tugs are investigated from short-term prediction for the largest deck wetness and the number of occurrences of deck wetness.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.627-638
• /
• 2017

Expecting fatigue life of mounted radar in aircraft is very important when designing, because the mounted radar in aircraft is exposed to long-term external random vibration. Among the methods of predicting the fatigue life, Fatigue analysis method in frequency domain has continuously been proposed in this field. In this paper, four fatigue analysis methods in frequency domain, which are widely used, have been selected and compared with the results for Specimen fatigue test. As a result, Dirlik and Benascicutti-Tovo methods have been matched better with fatigue analysis in time domain than the method in frequency method through the comparison between the fatigue analysis method in time domain and the method in frequency domain by conducting the specimen fatigue test with strain gage. Based on the results of the specimen fatigue test, We have conducted fatigue analysis of mounted radar in aircraft with Dirlik and Benasciutti-Tovo methods in the finite element model, and confirmed that the required life was satisfying.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.118-128
• /
• 1999

There are many ultrasonic measurement methods that are used in nondestructive testing applications. Some typical applications include material property determination, microstructural characterization. and flaw detection. Ultrasonic parameters such as velocity and attenuation are most commonly required in these applications. The accuracy and repeatability of testing results are dependent on both the hardware used to generate and receive the ultrasonic waves and on the analysis software for calculating these parameters. In this study, five analysis algorithms were implemented on a computer for measuring wave speed in a pulse echo. immersion testing configuration. In velocity measurements comparisons were made between the overlap. cross-correlation. Fourier transform. Hilbert transform, wavelet transform algorithms. Velocity measurement was applied to an isotropic steel sample using the five analysis algorithms. Frequency-dependent phase/group velocity and attenuation were also measured using the Fourier transform and wavelet transform algorithms on a composite laminate containing voids.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.45-53
• /
• 1998

본 논문에서는 선스펙트럼 주파수(LSF) 파라미터를 위한 제한된 시간적 분해법을 제안한다. LSF 파라미터는 인접 차수에 대해 의존적이고, 차수간 순차성이 있으나, 기존의 시간적 분해법은 이러한 성질을 보존하지 못한다. 즉, 추정된 사건 벡터가 더 이상 LSF 파 라미터로서 해석되지 못하는 문제가 있다. 이를 해결하기 위하여, 본 논문에서는 사건 함수 간에 새로운 제약을 두어, 추정된 사건 벡터가 LSF 파라미터의 성질을 유지하도록 한다. 결 과적으로 제안된 방법을 이용하여 구해진 사건 벡터는 LSF 파라미터와 동일한 방법을 적용 하여 효과적으로 양자화될 수 있고, 실험 결과 평균 752bps의 전송률로 투명한 양자화를 수 행할 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.445-448
• /
• 1998

고유음향 임피던스가 다른 물질이 층상구조를 이루고 있는 매질내에서 임의의 한 층에 형성된 이차원 초음파 음장이 다른 매질로 전파될 때에의 특성을 각스펙트럼법에 의해 해석하였다. 음원으로서는 baffle된 원형 트랜스듀서를, 층상구조를 매질로서는 물과 생체조직(지방)의 경계를 각각 고려하였다. 해석에 있어서는 먼저 각스펙트럼 분해요소, 즉, 음원의 크기 및 거리에 의존하는 기준음장의 최적 크기와 샘플링 간격을 균질매질을 이용하여 결정한 다음, 그 요소를 층상매질에 적용하였다. 그 결과, 경계면에서의 입사각(공간주파수)의 의존하는 투과계수에 입사음장의 곱으로 나타내어지는 투과음장은 각스펙트럼법에 의해 짧은 시간내에 정도 높게 산출될 수 있음을 보인다.