• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.1-3
• /
• 2016

낸드 플래시 메모리는 저 전력, 빠른 동작 속도, 높은 신뢰성, 가벼운 무게와 같은 특성을 가지는 비휘발성 메모리로써 폭넓은 분야에서 사용이 증가하고 있다. 그러나 낸드 플래시 메모리는 기존의 보조 기억 장치와 달리 쓰기 전 소거와 낮은 수명에 대한 문제가 존재한다. 기존의 많은 연구에서는 가비지 컬렉션을 통해 수명을 연장하기 위해 노력하였다. 본 논문에서는 낸드 플래시 메모리에 삭제 구간 정보를 활용한 가비지 컬렉션 기법을 제안한다. 제안하는 기법은 "N 삭제 구간 정보"를 이용하여 효과적인 희생블록을 선정하는 특징이 있다. 제안하는 기법은 GA 기법과 비교하여 평균 페이지 이주비용은 최대 50.1% 감소하였으며, 블록 당 소거 횟수의 표준 편차는 최대 233% 감소하였다. 또한, 낸드 플래시 메모리 시스템의 첫 번째 배드 블록 발생 시간은 최대 22.7% 연장하였고, 시스템 수명은 최대 16.7% 연장하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.248-253
• /
• 2002

가. 대형 원형베일의 볏짚을 절단하여 축사의 사조나 TMR제조기에 공급하는 원형베일쵸퍼를 개발하였다. 나. 시작기의 적정작업속도는 PTO 500rpm 수준이었으며 이때 작업능율은 964kg/시간, 평균볏짚절단길이는 13.9 cm이었다. 다. 시작기의 소요동력은 PTO회전수가 300rpm에서 600rpm으로 높아짐에 따라 증가하였으며 PTO회전수 500rpm 일 때 축 토크는 38.4kgf·m 수준이었다. 라. 비육우 50두 규모에서 시작기는 관행(볏짚절단기)에 비하여 노력절감 92%, 작업비용 26.%절감으로 나타나 실용성이 있는 것으로 나타났다. 마. 볏짚의 허실율만을 고려한 손익분기급이량은 106톤/년으로 나타나 대규모의 전업 낙농 농가나 비육우 농가 또는 여러농가에서 공동 사용할 경우에 경제성이 있는 것으로 나타났다.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2008

In this study, the microsphere silicone polymer beads were synthesized by UV irradiation and alkoxy hydrolysis. The coefficient of variation (CV) of microsphere silicone polymer beads were decreased with increasing UV intensity, reaction time. The mean particle diameter, refractive index, and pH value were $4.1{\mu}m$, 1.43 and 7.5, respectively. Also, the true and bulk specific gravity, moisture content were 1.30, and 0.40, below 2%. The mean particle diameter and CV were the lowest at 0.1 wt% hexamethyldisilazane (HMDS) and their roundnesses were $0.95{\sim}0.98{\mu}m$ values. The particle dispersion index of microsphere silicone polymer beads was 4.92 at 450 W, 90 min and the yield was increased to 11.3% at 20 wt% methyltrimethoxysilane (MTMS). The mean particle diameter was decreased with increasing the stirring rate and reaction temperature.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.27-36
• /
• 2013

Recently, as researches on VANET have actively progressed, the convenient and reliable services can be provided to the vehicles. In this paper, we propose the collaborative RSU scheduling scheme using multiple RSUs which are connected through a wired backbone. The proposed scheme efficiently disseminates both unsafety data and safety data, and reduces the deadline miss rate and the average response time. When safety data is occurred, it is send to previous RSU in advance and is scheduled by deadline and reception rate. We provide the prevention technology for unsafety data when the workload is occurred in RSU because it is on-demand data processed by user requests. It is shown through performance evaluation that the proposed scheme outperforms the existing scheme in terms of the deadline miss rate and the average response time according to the number of vehicles and the velocities of vehicles.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.187-197
• /
• 2005

All sensors in Ubiquitous sensor network have to communicate with limited battery If we adopt current authentication, there are difficulties to keep sensor network because heavy calculation in each sensor needs more power and lifetime of sensor could be short relatively because of the effect. This paper suggests network structure which is using RM(RegisterManarer) and AM(AuthenticationManager) to solve power Problem on authentication, and su99ests mutual-authentication protocol with low Power which supports a session key by mutual-authentication. RM and AM manage algorithm with fast calculation to keep the safety by doing key generation. encryption/decryption. authentication instead of each sensor node . Processing time to authenticate sensor node is 2.96$\%$ fast in the same subnet, and 12.91$\%$ fast in different subnet. Therefore. the suggested way Provides expanded lifetime of censor node and is more effective as sensor network size is bigger and bigger.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.4
• /
• pp.157-162
• /
• 1987

The basic experiments on the plastic sea eel pots used in fishing were carried out in order to investigate the elasticity of the funnel ribs, hydrodynamic resistance, sinking time and diffusion of the bait from June to October, 1987. The elasticity of the bamboo funnel ribs was higher than that of the polypropylene ribs up to the load 150g. The hydrodynamic resistance R (kg) of the pots towing to the head direction horizontally in relation to towing velocity V (m/sec) was expressed as following formula; R=0.36V super(2.01) and coefficient of drag C sub(D) was 0.52. The sinking times of the covered pots by tape fully or partially were late 1-2 second than the typical pots within the water depth 7.5m. The diffusion tendency through the covered pots using dye and sardine extracts solution was concentrated to the entrance more than the typical pots. However, fishing efficiency as number and weight of fish per pots for nine times fishing operation was revealed no difference between the covered pots and the typical pots.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.72-81
• /
• 2009

In this paper, we investigate a spectrum sharing scheme based on the interference temperature (IT), that is a recently introduced receiver-centric metric by FCC. We extend the existing frequency sharing procedure for single CR to the one for multiple CRs (or secondary users, SUs). In the proposed interference model, we consider the practical operating characteristics of primary users (PUs), stochastically activated (ON)/deactivated (OFF) at the time axis, and analyze quantitatively the CR user capacity based on the model. We define the instantaneous capacity for idle time-slot channel allocation and the mean capacity averaging this instantaneous capacity and use them for a proper frequency sharing. Apart from existing schemes, the proposed frequency sharing scheme changes the frequency parameters adaptively depending on the channel characteristics and does not need any sensing information from PUs. Through computer simulation, we verify the proposed model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1178-1185
• /
• 2009

In this paper, a wideband ultra-high speed & high purity discrete frequency synthesizer having minimum 2.5 MHz step size was proposed. To achieve fast and wideband operation, discrete frequencies were synthesized by mixing of 3 different pre-synthesized 16 frequencies made from fixed PLL and frequency dividers. Frequencies with discrete 2.5 MHz step were produced in 710~1,610 MHz. The measured hopping response time was 350 nsec average, output level was 21.5 dBm average with 2.65 dB flatness, spurious and harmonics level were suppressed below -60 dBc, and phase noise was -94 dBc/Hz@100 Hz. Also, a new measurement method for synthesizer response time was described.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5269-5279
• /
• 2014

The cause of defects in the PCB SMT assembly is mostly solder paste deposits. Conventional inspection methods for solder paste deposits suffer from slow speed, low reliability and high cost. Therefore, this paper proposes a method for calculating the height and region of solder paste on PCB using the 3D profiles without measuring the 2D image. The solder paste region is detected by the phase difference in the measurement points and the average phase on the whole surface of PCB. The high reliable height of the solder paste region is computed by the average of the measurement points' phase with repeatability and reliability. The experimental results revealed improvements of 17% in inspection time and 29% repeatability in the height calculation of the solder paste region, resulting in a high speed and less expensive system.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.281-286
• /
• 2002

In this study, blood flow in a carotid artery supplying blood to the human's brain has been numerically simulated to find out how the blood flow affects the genesis and the growth of atherosclerosis and arterial thrombosis. Velocity Profiles and hemodynamic parameters have been investigated for the carotid arteries with three different stenoses under physiological flow condition. Blood has been treated as Newtonian and non-Newtonian fluid. To model the shear thinning properties of blood for non-Newtonian fluid, the Carreau-Yasuda model has been employed. The result shows that the wall shear stress(WSS) increases with the development of stenosis and that the wall shear stress in Newtonian fluid is highly evaluated compared with that in non-Newtonian Fluid. Oscillatory shear index has been employed to identify the time-averaged reattachment point and this point is located farther from the stenosis for Newtonian fluid than for non-Newtonian fluid The wall shear stress gradient(WSSG) along the wall has been estimated to be very high around the stenosis region when stenosis is developed much and the WSSG peak value of Newtonian fluid is higher than that of non-Newtonian fluid.