• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.207-212
• /
• 2008

연구에서는 SPOT-3 인공위성 영상으로부터 얻어진 영상 스테레오 스트립과 GCP(Ground Control Point)자료를 이용하여 다양한 GCP배치에 따른 궤도기반 센서모델의 정확성에 대해 분석하였다. 실험에 사용된 기준점자료는 춘천지역에서부터 나주지역에 이르기 까지 약 420km 길이의 지역에 대해 GPS측량을 통해 획득하였다. 궤도기반 센서모델에 적용된 미지수는 위성의 위치와 속도, 자세를 표현하는 방정식의 계수를 미지수로 선택하여 일곱 가지 방식으로 조합하였다. 실험은 우선 모델점의 위치를 일곱 가지 경우로 결정하고 각 경우에 대해 일정한 개수의 모델점을 선택하였다. 그리고 각 경우의 모델점의 위치에 대해 궤도기반 센서모델의 미지수 조합 모델을 각 각 다르게 적용해 본 후 그 결과를 시각적, 수치적으로 분석해 보았다. 실험 결과 모델점의 위치에 관계 없이 궤도기반 모델에 적용할 수 있는 높은 정확도를 나타내는 미지수 조합모델을 찾아낼 수가 있었고, 여러 가지 모델점의 위치를 궤도기반 센서모델에 적용해 본 결과 지리적, 시간적, 경제적 효율성을 갖는 최적의 미지수 조합을 찾을 수가 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.13-20
• /
• 2010

Currently, NGII(National Geographic Information Institute) provides VRS(Virtual Reference System) service using 44 CORS(Continuously Operating Reference Stations). Since the VRS provides high-precision coordinate in a short time, the users and applications are expected to be rapidly increasing. The accuracy analysis on the VRS service, however, was not sufficiently performed yet. Therefore, in this study, the VRS data is acquired from various circumstances and its accuracy is analyzed. According to analysis, it was concluded that the VRS could be applied to public control point survey. Furthermore, it was found that the PQ(Position Quality) which represents variance of estimated coordinates rather than GDOP(Geometric Dilution of Precision) is more relevant as a factor to determine the accuracy of coordinates. Based on the analysis of data from four manufacturers (TRIMBLE, MAGELLAN, LECIA, TOPCON), it was confirmed that the standard deviations better than 3cm. Therefore, VRS Survey apply to public control point survey.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.445-449
• /
• 2017

Most studies using drone is confined utilization on the ground and regulation. The drone in the water is rarely used in hydrographic surveying because of the limit of flight time and image matching. This paper is the basic research for drone hydrographic photogrammetry. The accuracy of hydrographic photogrammetry, using buoys for water reference point, was evaluated. The accuracy is influenced by the accuracy of the water reference points like the photogrammetry. The position of water reference points set up on water, keep on changing due to various environmental factors such as wind speed and water velocity. The position continuously changed of the water reference points were measured 3 times using Total Station and VRS. Experiments were conducted at two reservoirs in Gimhae City, and the accuracy of the manual image matching using the water reference points is 40 cm and 80 cm. Allowable accuracy of the ocean boundary survey is ${\pm}2m$, the results of this study are fully available. The maximum position error of the water reference point for ensuring accuracy within ${\pm}2m$ is 1.8 m.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.332-332
• /
• 2012

분자선 에피탁시(molecular beam epitaxy)를 이용하여 GaAs 기판에 성장한 InAs 양자점(QDs: quantum dots)은 성장 온도, 압력, As/In의 공급비 등의 성장 조건에 따라 다른 변수(parameter)를 갖는다. 따라서 성장변수에 따라 양자점의 모양과 크기, 밀도가 달라져 균일한 양자점 형성에 어려움이 있어 많은 연구가 진행되고 있다. 예를 들면 In-interruption 법으로 성장한 양자점의 특성이 S-K mode (Stranski-Krastanov mode)로 성장한 양자점에 비해 광학적 특성이 향상되었다. 본 연구에서는 In pre-deposition (IPD) 법으로 성장한 InAs/GaAs 양자점의 광학적 특성을 PL(photoluminescence)와 TRPL (time-resolved PL)을 이용하여 분석하였다. InAs QDs 시료들은 In과 As 공급시간을 각각 1초와 19초 (QD1), 2초와 18초 (QD2), 3초와 17초 (QD3)로 조절하여 성장하였으며, In이 공급되는 시간 동안 As shutter를 차단하여 As 공급을 중단하였다. In과 As의 차단 없이 S-K mode로 성장한 시료를 기준시료로 사용하였다 (QD0). AFM (atomic force microscope) 측정결과, In 공급시간이 1초에서 2초로 증가할 때, 양자점의 밀도와 종횡비(aspect ratio)가 증가하였고, 양자점의 균일도가 증가하였다. 그러나 QD3 시료는 QD1 시료에 비해 밀도와 종횡비, 균일도가 감소하였다. 10 K에서 PL 피크는 In 공급 시간이 증가할 때, 970 nm에서 1020 nm로 적색편이 하였고 반치폭 (FWHM: full width at half maximum)은 75 meV에서 85 meV로 증가하였다. QD2 시료의 PL 피크 에너지가 가장 낮았고, 가장 강한 PL 세기를 보였다. IPD 시간이 증가함에 따라 PL 피크에서 측정한 PL 소멸은 점차 빨라졌다. IPD 기법으로 성장한 양자점의 빠른 PL 소멸은 양자점 밀도와 종횡비 향상에 의한 파동함수 중첩의 증가와 구속 에너지 증가에 의한 것으로 설명된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1102-1107
• /
• 2004

Fingerprint Recognition System is made up of Off-line treatment and On-line treatment; the one is registering all the information of there trieving features which are retrieved in the digitalized fingerprint getting out of the analog fingerprint through the fingerprint acquisition device and the other is the treatment making the decision whether the users are approved to be accessed to the system or not with matching them with the fingerprint features which are retrieved and database from the input fingerprint when the users are approaching the system to use. In matching between On-line and Off-line treatment, the most important thing is which features we are going to use as the standard. Therefore, we have been using “Delta” and “Core” as this standard until now, but there might have been some deficits not to exist in every person when we set them up as the standards. In order to handle the users who do not have those features, we are still using the matching method which enables us to make up of the spanning tree or the triangulation with the relations of the spanned feature. However, there are some overheads of the time on these methods and it is not sure whether they make the correct matching or not. Therefore, I would like to represent the more correct matching algorism in this paper which has not only better matching rate but also lower mismatching rate compared to the present matching algorism by selecting the line segment connecting two minutiae on the same ridge and furrow structures as the reference point.

• Journal of Science Education
• /
• v.37 no.2
• /
• pp.245-260
• /
• 2013

The purpose of the research is to examine the teachers' cognition about the math textbook selecting and to provide the implications about the rational process of the textbook selection and criteria based on the research. In terms of the research result about the inner and outer criteria of the actual process of the textbook selecting, they utilized the standard selection criteria distributed by Office of Education, and they considered 'Organization of learning contents' and 'Learning evaluation' as the most important factors. The selection method was that the answer 'After scoring the grade with matching standards, selecting by adding the total score' was the highest. In case of the actual selection, the most considerable inner criteria appeared 'Learning quantity and propriety of the difficulty level'. The outer criteria showed 'Awareness', and the difficulty in the selection process was 'in sufficient time for reviewing'. Based on this research result, we draw the implication that needs to be improved in the process of the textbook selection and the criteria.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.14 no.2
• /
• pp.26-36
• /
• 2015

The new town was assumed that there is a difference between the country's elementary school environment. First, given the important elements of the school safety plan in order to verify this, and we plan to set up each of these elements by safety criteria. In the second chapter in order to achieve the objective of this study was to develop indicators to evaluate the safety of the school environment influences the safety of the school environment through the theoretical consideration. In Chapter 3, the difference in safety through the new elementary school survey of metropolitan areas was given a score per item per item depending on the evaluation criteria. The fourth section is the difference between safety school environment can be summarized as the following analytical results that the difference between the new city. The results of this study as follows: First, the characteristics of the elementary school environment showed a significant difference between the new town. Second, school location, terrain characteristics, bike paths and pedestrian to the installation, the safety of landscape installations, installing median barriers, traffic safety facilities, speed bumps, separation of pedestrian and vehicle circulation in the front door, scores of elements of the plan such as parking scheme there is a difference between the new town. Third, the introduction of elements of the plan such as Traffic calming or Traffic Island installation techniques was found lacking.

• 한국어정보학회:학술대회논문집
• /
• 2016.10a
• /
• pp.321-323
• /
• 2016

최근 연구에서 기계학습 중 지도학습 방법으로 개체명 인식을 하고 있다. 그러나 지도 학습 방법은 데이터를 만드는 비용과 시간이 많이 필요로 한다. 본 연구에서는 주석 된 말뭉치를 사용하여 지도 학습 방법을 사용 한다. 의생명 개체명 인식은 Protein, RNA, DNA, Cell type, Cell line 등을 포함한 텍스트 처리에 중요한 기초 작업입니다. 그리고 의생명 지식 검색에서 가장 기본과 핵심 작업 중 하나이다. 본 연구에서는 순환형 신경망과 워드 임베딩을 자질로 사용한 조건적 임의 필드에 대한 성능을 비교한다. 조건적 임의 필드에 N_Gram만을 자질로 사용한 것을 기준점으로 설정 하였고, 기준점의 결과는 70.09% F1 Score이다. RNN의 jordan type은 60.75% F1 Score, elman type은 58.80% F1 Score의 성능을 보여준다. 조건적 임의 필드에 CCA, GLOVE, WORD2VEC을 사용 한 결과는 각각 72.73% F1 Score, 72.74% F1 Score, 72.82% F1 Score의 성능을 얻을 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.511-518
• /
• 2012

It is well-known that non-metric digital cameras have to be calibrated for the close-range photogrammetry. But, the self-calibration is still not an easy task because it requires rather a large calibration site of accurate control points, multiple image acquisitions in different positions, and accurate image point measurements that are quite labor-intensive and time-consuming. Based on the premise, this study carried out check point accuracy analysis from self-calibration of different control point designs and photo combinations. The test results showed that the calibration using three photos covering three-dimensional control points produced high accuracy, but control points on a plane could attain the comparable accuracy with four photos including a 90-degree rotated photo. We then compared the target accuracy of on-site self-calibration using flat control points to that of laboratory-self calibration and observed comparable results.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.37-45
• /
• 2010

AT(Aerial Triangulation) is the essential procedure for creating orthophoto and transforming coordinates on the photographs into the real world coordinates utilizing GCPs (Ground Control Point) which is obtained by field survey and the external orientation factors from GPS/INS as a reference coordinates. In this procedure, all of the GCPs can be collected from field survey using GPS and Total Station, or obtained from digital maps. Collecting GCPs by field survey is accurate than GCPs from digital maps; however, lots of manpower should be put into the collecting procedure, and time and cost as well. On the other hand, in the case of obtaining GCPs from digital maps, it is very difficult to secure the required accuracy because almost things at each stage in the collecting procedure should rely on the subjective judgement of the performer. In this study, the results from three methods have been compared for the accuracy assessment in order to know if the results of each case is within the allowance error: for the perceivable objects such as road boarder, speed bumps, constructions etc., 1) GCPs selection utilizing the unique LiDAR intensity value reflected from such objects, 2) using LiDAR DSM and 3) GCPs from field survey. And also, AT and error analysis have been carried out w ith GCPs obtained by each case.