• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.93-101
• /
• 2002

The effect of nonlinear friction in the low velocity is dominant in precise controlled mechanisms and it is difficult to identify the friction effect. The friction model which Canudas suggested so called, LuGre model is well expressed the friction effect as Streibeck in the law velocity. But it\`s model parameters were estimated continuously in operation for precise control. This paper suggests the sliding mode controller and observer for compensating the friction effect. Experimental results for a ball-screw system show that the proposed method has a good performance especially in the low velocity.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.78-85
• /
• 2013

This paper presents the sliding mode control methods for anti-lock brake system (ABS) with the friction force observer. Using a simplified quarter car model, the sliding mode controller for ABS is designed to track the desired wheel slip ratio. Here, new method to find the desired wheel slip ratio which produces the maximum friction force between road and tire is suggested. The desired wheel slip ratio is varying according road and tire conditions to produce maximum friction force. In order to find optimum desired wheel slip ratio, the sliding mode observer for friction force is used. The proposed sliding mode controller with observer is evaluated in simulation, and the control design is shown to have high performance on roads with constant and varying adhesion coefficients.

• 드라이브 ㆍ 컨트롤
• /
• 제18권3호
• /
• pp.16-22
• /
• 2021

The variable structure controller has the characteristic that while in sliding mode, the system moves along the switching plane in the vicinity of the switching plane, so it is robust to the parameter fluctuations of the plant. However, a controller based on a variable structure may not meet the desired performance when it is commanded to track any input or exposed to disturbances. To solve this problem, a sliding mode controller based on the IVSC approach excluding an integrator is proposed in this study. The proposed sliding mode control was applied to the position control of a hydraulic cylinder piston. The sliding plane was determined by the pole placement and the control input was designed to ensure the existence of the sliding mode. The feasibility of the modeling and controller was reviewed by comparing it with a conventional proportional control through computer simulation using MATLAB software and experiment in the presence of significant plant parameter fluctuations and disturbances.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.416-422
• /
• 2017

인간과 로봇이 같은 공간에서 작업을 할 경우가 많아짐에 따라 안전성을 고려한 로봇의 제어가 필요하다. 안정성을 위해서 로봇은 인간의 힘에 순응해야 함으로 낮은 임피던스가 요구되는 반면에 높은 제어성능을 갖도록 하기 위해서는 외란에 강인하기 위해서는 높은 임피던스가 요구된다. 이러한 이율배반적인 목적을 달성하기 위해서 본 연구에서는 적분슬라이딩모드와 외란관측기(DOB)를 사용하여 인간의 힘 이외의 외란에는 강인한 특성을 보이고 인간의 힘에는 순응할 수 있는 제어기를 설계한다. 인간의 동작이 특정 주파수의 범위에 있다는 사실에 근거하여 인간에 의한 외란인 경우의 외란에 대해서는 로봇이 순응하도록 슬라이딩모드를 설계하는 것이 본 논문의 독창적인 아이디어이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.23-27
• /
• 1998

This paper presents a new speed and position sensorless control method of permanent magnet synchronous motors based on the sliding mode observer. The sliding mode observer structure and its design method are discussed. Also, Lyapunov functions ar chosen for determining the adaptive law for the speed and the stator resistance estimator. The effectiveness of the proposed observer is confirmed by the computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.284-284
• /
• 2000

In adaptive fuzzy control systems. fuzzy systems are used to approximate the unknown plant nonlinearities. Until now. most of the papers in the field of controller design for nonlinear system using fuzzy systems considers the affine system with fixed grid-rule structure based on system state availability. This paper considers observer-based nonlinear controller and dynamic fuzzy rule structure. Adaptive laws for fuzzy parameters for state observer and fuzzy rule structure are established so that the whole system is stable in the sense of Lyapunov.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1156-1158
• /
• 1997

This paper presents the proposed full-order observer-based sliding mode power system stabilizer(FOOSMPSS) for finding unmeasurable state variables(torque angle, quadratic-axis transient voltage, exciter output voltage, voltage regulator output voltage and output voltage) by measuring angular velocity. The simulation results is shown by the comparison of the FOOPSS with the proposed FOOSMPSS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2667-2668
• /
• 2000

In this paper we consider the TORA system and use sliding observer and backstepping to design a robust controller for tracking problem.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.79-82
• /
• 2003

This paper presents a new speed and position sensorless of Switched Reluctance Motor(SRM) based on the sliding mode observer. The sliding mode observer structure and its design method are discussed. Also, Lyapunov functions are chosen for determining the speed and the stator resistance estimator. The effectiveness of the proposed observer system is confirmed by the computer simulation.

• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.9-12
• /
• 2005

This paper presents an LMI-based method to design sliding mode observers for a class of uncertain systems. Using LIs we derive an existence condition of a sliding mode observer guaranteeing a stable sliding motion. And we give explicit formulas of the observer gain matrices. We also consider sliding mode observer design problems under an α-stability constraint or an LQ performance bound constraint. Finally, we give a numerical design example.