• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.141-143
• /
• 2007

본 논문은 매입형 영구자석 동기전동기의 속도 센서리스의 제어 방법에 관한 것이다. 매입형 영구자석 동기전동기의 센서리스 구동을 위하여 적응 적분바이너리 관측기와 적응 슬라이딩 모드 관측기를 이용하였다. 두 관측기의 성능 비교를 위하여 매입형 영구자석 동기전동기의 고정자 전압방정식으로부터 각각 관측기를 구성하였고, 동일한 시스템에서의 실험을 통하여 관측기의 성능을 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2377-2379
• /
• 2004

본 논문에서는 유도전동기의 속도 제어를 위한 자속관측기를 설계한다. 고정자에서 전류의 크기, 전류의 변화량과 회전자의 회전 속도를 측정하여 슬라이딩 평면을 구성한 슬라이딩 보드 기법으로 설계된 관측기를 통해 자속을 추정한다. 모의실험을 통해 관측기의 성능을 검증한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.1
• /
• pp.40-46
• /
• 2005

This paper has investigated the speed sensorless indirect vectorcontrol of a two-phase induction motor to implement adjustable-speed drive for low-power applications. The sliding mode observer estimates rotor speed. The convergence of the nonlinear time-varying observer along with the asymptotic stability of the controller has been analyzed. To define the control action which maintains the motion on the sliding manifold, an "equivalent control" concept is used. It has been simulated and implemented on a sensorless indirect vector drive for 150W two-phase induction motor. The simulation and experimental results demonstrate effectiveness of the estimation method.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.44-51
• /
• 2006

This paper addresses sliding mode control of the anti-lock braking system (ABS) with a disturbance observer for model uncertainties such as vehicle parameter variation, un-modeled dynamics, and external disturbances. By using a nominal vehicle model, a sliding mode controller is designed to achieve a desired wheel slip ratio for ABS control. To compensate the model uncertainties, a disturbance observer is introduced with the help of a transfer function of a hydraulic brake dynamics. A proposed sliding mode controller with a disturbance observer is evaluated through simulations for model uncertainties. The simulation results show that the disturbance observer can enhance performances of sliding mode control for ABS.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.526-527
• /
• 2010

본 논문에서는 슬라이딩 모드 관측기를 이용하여 IPMSM(Interior Permanent Magnet Synchronous Motor)의 센서리스 제어의 기동특성에 관한 연구를 수행하였다. IPMSM의 센서리스 제어는 초기 구동시 회전자의 위치를 알 수가 없으므로 Open-Loop알고리즘을 이용하여 강제로 모터를 구동시킨다. 그러므로 Open-Loop에서 Closed-Loop로 제어되는 시점에서 부하의 상태에 따라 기동 특성에 문제점을 야기 시킬 수 있다. 본 논문에서는 부하에 따라 기동 특성에서 야기되는 문제점과 해결책을 제시한다. 제시된 방법을 시뮬레이션을 통해 검증한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1203-1211
• /
• 2017

This paper proposes a robust controller for flexible joint robots to achieve tracking performance and to improve robustness against both matched and mismatched disturbances. The proposed controller consists of a disturbance observer(DOB), passivity-based controller, and integral sliding mode controller(ISMC) in a backstepping manner. The DOB compensates the mismatched disturbance in the link-side and formulates the reference input for the motor-side controller. Interconnection and damping assignment passivity-based controller (IDA-PBC) performs tracking control of motor-side, and it is integrated to nominal control of ISMC to guarantee the over-all stability of the nominal system, while, matched disturbances are decoupled by the discontinuous control of ISMC. In the design of the link-side controller, PD type impedance controller is designed with DOB and this leads the continuous control input which is suitable to the reference input for the motor-side.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.591-597
• /
• 2017

This study is to develop a vehicle Integrated Dynamics Control System(IDCB) that can stabilize the lateral dynamics and maintain steerability. To accomplish this task, an eight degree of freedom vehicle model and a nonlinear observer are designed. The IDCB independently controls the brake systems of four wheels with a fuzzy logic control and a sliding model control. The result shows that the nonlinear observer produced satisfactory results. IDCB tracked the reference yaw rate and reduced the body slip angle under all tested conditions. It indicates that the IDCB enhanced lateral stability and preserved steerability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.866-873
• /
• 2000

Sliding mode control(SMC) incorporated with perturbation compensation is developed here to reduce the low-frequency tracking error in the presence of wide-band frequency perturbations for a nonlinear dynamic system. The control scheme is designed for estimation of low frequency perturbations with employment of the Time Delay Control and low-pass filter. It is shown that the SMC with perturbation compensation is far superior to the conventional SMC in tracking control of the dynamic systems under model uncertainties and external disturbance conditions.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.24-34
• /
• 2006

Hydrodynamic coefficients strongly affect the dynamic performance of an AUV. Thus, it is important to know the true values of these coefficients, in order to accurately simulate the AUV's dynamic performance. Although these coefficients are generally obtained experimentally, such as through the PMM test, the measured values are not completely reliable because of experimental difficulties and errors. Another approach, by which these coefficients can be obtained, is the observer method, in which a model-based estimation algorithm estimates the coefficients. In this paper, the hydrodynamic coefficients are estimated using two nonlinear observers: a sliding mode observer and an extended Kalman filter. Their performances are evaluated in Matlab simulations, by comparing the estimated coefficients obtained from the two observer methods, with the experimental values as determined from the PMM test. A sliding mode controller is constructed for the diving and steering maneuver by using the estimated coefficients. It is demonstrated that the controller, applied with the estimated values, maintains the desired depth and path with sufficient accuracy.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.169-172
• /
• 2007

This paper presents circuit models and control algorithms of distributed generation system(DGS) which consists of Z-type converter and PWM inverter. Z-type converter which employs both the L and C passive components and shoot-through zero vectors instead qf the conventional DC/DC converter in order to step up DC-link voltage. Discrete time sliding mode control with the asymptotic observer is used for current control. This system am be used for power conversion of DC renewable energy.