• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2015

This paper predicts the spring-in effect of curved laminated composite structure for various stacking sequence using finite element analysis(ABAQUS). In composite manufacturing process, large temperature difference, different coefficient of thermal expansion and chemical shrinkage effect cause distortion of composite parts such as spring-in and warpage. Distortion of composite structure is important issue on quality of product, and it should be considered in manufacturing process. In finite element analysis, a CHILE(Cure Hardening Instantaneously Linear Elastic) model and chemical shrinkage effects are considered developing user subroutine in ABAQUS and some cases are simulated.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.341-344
• /
• 2022

본 논문에서는 삼각형 메쉬 기반에서 변형률 기반 동역학(Strain-based dynamics, SBD)을 안정적으로 표현할 수 있는 굽힘 스프링 구조와 감쇠 기법에 대해 설명한다. SBD는 삼각형 메쉬의 에지 길이(Edge length) 기반의 에너지 대신 변형률(Strain)을 활용하여 에너지를 모델링한다. 하지만, 비정상적인 삼각형(Degenerate triangle)인 경우 변형률이 불안정하게 계산되어 잘못된 방향으로 늘어나는 문제가 발생한다. 본 논문에서는 이러한 문제를 효율적으로 처리할 수 있는 굽힘 스프링(Bending spring) 구조에 대해 소개한다. 결과적으로 본 논문에서 제안하는 기법은 안정적으로 SBD를 처리할 수 있기 때문에 다양한 재질의 옷감 시뮬레이션을 안정적으로 표현할 수 있도록 한다.

• The Safety technology
• /
• no.175
• /
• pp.15-17
• /
• 2012

한 대의 자동차가 완성되기 위해서는 약 2~3만 개에 가까운 부품이 들어간다. 자동차의 심장인 엔진부분은 물론 자동차의 외형을 이루는 몸체, 각종 전기장치 등을 만들기 위해서 갖가지 부속품이 필요한 것이다. 이들 부품 가운데 특히 많이 쓰이는 것이 압축코일, 비틀림코일, 태엽 등의 각종 스프링이다. 이와 같은 스프링을 제작하는 기업은 많지만 그중에서도 (주)디지에쓰는 업계에서 명성이 자자하다. 지난 1974년 설립돼 현재 40여 명이 근무하고 있는 작은 회사이지만 기술연구소를 설치 운영하고 있을 정도로 연구개발에 힘써 온 결과 남부럽지 않은 기술력을 갖게 됐기 때문이다. 2010년에 중소기업청으로부터 기술혁신형 중소기업으로 선정된 것이 이를 입증하고 있다. 작지만 강한 기업이라는 수식어가 전혀 어색하지 않은 것이다. (주)디지에쓰가 명성을 얻고 있는 데에는 또 다른 이유가 있다. 바로 철저한 안전관리를 바탕으로 5년 연속 무재해를 이어가고 있기 때문이다. 우리나라의 산업재해 가운데 80% 이상이 50인 미만 소규모 사업장에서 발생하고 있다는 점에 비춰보면 이곳의 무재해 기록이 갖는 의미는 남다르다고 할 수 있다. 철저한 안전관리를 바탕으로 성장을 거듭하고 있는 (주)디지에쓰를 찾아가 봤다.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.2
• /
• pp.55-62
• /
• 2012

This paper presents a new method to represent the secondary deformation effect using simple mass-spring simulation on the vertex shader of the GPU. For each skin vertex of a 3D character, a zero-length spring is connected to a virtual vertex that is to be rendered. When a skin vertex changes its position and velocity according to the character motion, the position of the corresponding virtual vertex is computed by mass-spring simulation in parallel on the GPU. The proposed method represents the secondary deformation effect very fast that shows the material property of a character skin during the animation. Applying the proposed technique dynamically can represent squash-and-stretch and follow-through effects which have been frequently shown in the traditional 2D animation, within a very small amount of additional computation. The proposed method is applicable to represent elastic skin deformation of a virtual character in an interactive animation environment such as games.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.116-125
• /
• 1995

In ship and of offshore structures, there exist many local panels of various shapes having many kinds of attachments reducible to damped spring-mass systems. For the vibration analysis of panels, analytical methods such as Rayleight-Ritz method or the assumed mode method can be efficiently applied. There have been many studies on the vibration analysis of rectangular panels using the analytical methods but relatively few for arbitrary shape panels. An efficient formulation based on the assumed mode method is presented for the vibration analysis of an arbitrary quadrangular plate having concentrated masses, supporting springs such as pillars and spring-mass systems. In the formulation, the natural coordinate system is used for the efficient treatment of an arbitrary quadrangular shape. Through some numerical calculations, accuracy and efficiency of the presented method are shown.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2266-2268
• /
• 2000

본 논문에서는 스캐닝 미러의 일종으로, 광저장 장치의 픽업헤드용으로 미세회전을 하면서 레이저 빔을 편향시키는 용도로 사용되는 미러를 제작하고 구동실험을 하였다. 제작된 미러의 크기는 $2400{\times}2400{\times}64{\mu}m^3$이고, 빔 스프링은 $500{\times}9.6{\times}64{\mu}m^3$이다. 니켈 전해 도금으로 29${\mu}m$ 높이의 구동 전극을 제작하였고(세가지 모델: 공기통로가 없는 전극, 공기통로와 간격이 각각 200${\mu}m$인 전극, 공기통로와 간격이 각각 100${\mu}m$인 전극), 미러판과 전극을 조립하여(미러판과 전극 사이의 간격은 각각 29${\mu}m$, 26${\mu}m$, 26${\mu}m$) 구동실험을 하였다. 공진 주파수의 계산간은 576Hz, 측정값은 3개의 미러에서 모두 568Hz이었다. 전극과 미러판의 간격이 최대 접근거리 18${\mu}m$가 되도록 미세 회전을 시켰을 때, 공기통로가 없는 전극에서는 공진 주파수가 524Hz, 공기통로가 200${\mu}m$인 전극에서는 544Hz로 각각 감쇠되었고, 공기통로가 100${\mu}m$인 전극에서는 그대로 568Hz이었다.

• Composites Research
• /
• v.16 no.2
• /
• pp.26-32
• /
• 2003

Optical fibers, for splice, are stripped of their plastic coatings with a plastic stripper and cut off at the end. Therefore, stripped fibers often receive accidental damages and sustain small flaws or cracks. As a result, the breaking strength of a fiber splice made under normal conditions is reduced to about 0.4∼1 ㎏ on the average, nearly one-tenth of the fiber's strength. This makes it necessary to reinforce the splice. One of the most practical and reliable methods for optical fiber splicing is fusion splicing, comprising the steps of tripping the plastic coatings from the two fiber ends to be splice, placing the two bare fiber ends in an end-to-end position, and of fusion splicing, such as are fusion. Generally, steel bar (SB) sleeve is used to reinforce this fusion-splicing region. However, this type of sleeve has a critical defect to keep optical lose after bent by a sudden load. New type of composite spring (CS) sleeve is developed to make up for the weak points in the SB sleeve. This sleeve has an effect on restoration to the original state after eliminating the bending load. The optical spectrum analyzes results show the availability of reinforcement for the fusion splicing optical fiber using small diameter composite springs under the various loading conditions.

• Composites Research
• /
• v.33 no.4
• /
• pp.220-227
• /
• 2020

When curing the composite, the fibers have little thermal deformation, but the resin changes its properties with time and temperature, which leads to residual stress in the product. Residual stress is caused by the difference in the coefficient of thermal expansion of the fibers and resin during the curing process and the chemical shrinkage of the resin. This difference causes thermal deformation such as spring-in and warpage. Thermal deformation of composite structure is important issue on quality of product, and it should be considered in manufacturing process. In this study, a subroutine was developed to predict thermal deformation by applying 3-D viscoelastic model. The finite element analysis was verified by comparing the results of the plate analysis of the 2-D viscoelastic model. Spring-in of L-shaped structure was predicted and analyzed by applying the 3-D viscoelastic model.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.121-131
• /
• 2020

The study of arrangement in musical theatre has been relatively marginalized compared to the playwriting and composition. However, as complete musical music can never exist without the process of arranging, the arranger is a major creator who plays the most important role as a playwright or composer, and finally makes a decisive contribution to enhancing the completeness of the musical. Based on the tracks of (2006), (2007) and (2008), among the prestigious Tony Awards winners for Best Orchestrations, the feature is divided into instrumentation, instrumental combinations and dispositions, and insertions of counterpoint. So, we can discover the new imagination and creativity of the arranger, and the arranger's clever orchestration techniques that meet the composer's intentions.

• Geotechnical Engineering
• /
• v.6 no.1
• /
• pp.7-14
• /
• 1990

The two degree of freedom model is proposed to study the effects of imperfect fixing at the active end of spring-top resonant column apparatus. A computer program using the SYMPHONY spreadsheet is developed to calculate the dimensionless frequency, F, from which modulug can be determined. It is found that the effect of reaction mass through the parameter Tr on dimensionless frequency, F, can not be ignored if Tr$\leq$20. As To increases, the variation of F increases. But for Tr$\geq$ 20, the effect of To becomes small. It is recommended that T. be greater than 20 if single degree of freedom model is rosed to determine modulus of soil. It also is found that damping ratios of specimen and apparatus do not strongly affect the dimensionless frequency, F.