• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.85-90
• /
• 2007

This paper presents the finite element analysis on the strength safety of a full containment LNG storage tank system with damping safety structures. For the FEM analysis of the inner tank, the combined loads in which are related to a hydrostatic pressure, a cryogenic temperature load, BOG pressure, LNG weight, and a sinking force at the comer of the inner tank have been applied to the inner tank structure. The FEM computed results show that the conventional inner tank is safe for the given combined loads, but the damping safety structure such as compressive springs may be more useful structures to increase the safety of the tank system. The increased stiffness and the appropriate position of the springs are very important design parameters for increasing the damping strength safety of the tank system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.297-302
• /
• 1998

유한요소법을 이용하여 스프링으로 연속 지지되고 축방향 하중이 작용하는 핵연료봉의 자유진동 해석올 수행하였다. 본 해석에는 지지격자 지지점에서 핵연료봉의 변위가 구속되지 않는 실제 경계조건을 반영하였다. 이러한 경계조건은 지지점 스프링 상수에 의하여 핵연료봉 해석모델의 탄성항이 약화되는 현상을 반영할 수 있어서 지지점이 구속된 기존의 모델보다 고유진동수를 작게 예측한다. 스프링 상수가 어떤 임계값 이하를 갖는 경우 고유진동수 뿐만 아니라 모드형상도 크게 변하기 때문에 지지점을 구속한 모델에 의한 해석은 실제 진동현상을 상당히 왜곡 할 수 있다. 핵연료봉에 작용하는 축방향력이 인장력에서 압축력으로 감소함에 따라 고유진동수도 감소하지만 핵연료봉의 고유형상은 변하지 않았다. 지지격자 스프링 상수의 점진적인 감소와 핵연료봉 축방향 압축력의 감소를 동시에 적용하는 경우 고유 진동수는 두 변수를 별도로 적용했을 때 얻은 최소값의 변화에 따르는 경향을 나타내었다.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1057-1063
• /
• 2023

The urban railway sleeper floating track, the subject of this study, is an anti-vibration track to reduce vibration transmitted to the structure. currently, the replacement cycle of resilience pad for sleeper floating tracks is set and operated based on load. however, most previous studies were conducted on load-based structural safety aspects, such as fatigue life evaluation of sleeper anti-vibration pads and increase in track impact coefficient and track support stiffness due to increase in spring stiffness. therefore, in this study, we measure the vibration acceleration of the ballast for each analysis section and use the results of 7 million fatigue tests to calculate the spring stiffness of the resilience pad for each section. the spring stiffness of the resilience pad calculated for each section was set as the analysis data and the concrete vibration acceleration was derived analytically. the adequacy of analysis modeling was verified as the analyzed concrete bed vibration acceleration for each section was within the field-measured concrete bed vibration acceleration range. using the vibration acceleration curve according to the derived spring stiffness change, the spring stiffness of the resilience pad is estimated from the measured vibration acceleration. therefore, we would like to present a technique that can estimate the spring stiffness of resilience pad of a running track using the vibration acceleration of the measured concrete bed.

• Composites Research
• /
• v.35 no.6
• /
• pp.439-446
• /
• 2022

In this study, fiber-reinforced composite coil springs for automobiles were manufactured using the braiding method, and mechanical tests and damage evaluation were performed to confirm their safety. Through the analysis of the load-displacement behavior, the stiffness of the springs was evaluated to meet the specifications. In addition, the distribution of voids and the impregnation rate on the spring wire section were analyzed to clearly understand the criteria for the mechanical properties of the composite material. Moreover, the tested springs were visually inspected to confirm the damaged parts, and the failure mode was analyzed by observing crack initiation and propagation behavior of cross-sectional samples taken from the crack and failure adjacent areas of springs using SEM.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.61-68
• /
• 1991

The system such as railway bridge can be modelled as the restrained beam with intermediate supports. This kind of structures are subject to the moving load, which has a great effect on dynamic stresses and can cause sever motions, especially at high velocities. Therefore, to analyze the dynamic characteristics of the system due to the moving load is very important. In this paper, the governing equation of motion of a restrained beam subjected to the moving load is derived by using the Hamilton's principle. The orthogonal polynomial functions, which are trial functions and satisfying the geometric and dynamic boundary conditions, are obtained through simple procedure. The dynamic response of the system subjected to the moving loads is obtained by using the Galerkin's method and the numerical time integration technique. The numerical tests for various constraint, velocity and boundary conditions were preformed. Furthermore, the effects of mass of the moving load are studied in detail.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.2
• /
• pp.183-190
• /
• 1982

이 논문에서는 유압제어장치의 응답에 대하여 관성하중, 점성하중, 쿨룸(Coulomb)마찰 및 입력 신호의 주파수가 시스템에 미치는 영향을 고찰하였고, 이에 따른 속도와 압력파형을 주로 서 술하였다. 피스톤의 드리프트(drift)와 스프링하중을 제외한 대부분의 요소가 고려되었다. 추출된 방정식은 모두 무차원화 하였으며 입력 신호를 계단함수로 할 때에는 위치 피이드백 (feedback)이 삽입되었다.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.30-36
• /
• 2003

궤도(track)는 열차가 안전하고 승차감(乘車感)이 좋게 운행되도록 충분한 강도를 가지고 더욱이 양호한 상태로 정비되어 있어야 한다. 일반적으로, 토목구조물(structure)은 하중을 받으면 변위(變位)ㆍ변형하고, 하중이 없게 되면 원래대로 되돌아간다. 즉, 각 부재는 탄성 한계 내로 응력(應力)이 들어가도록 설계된다. 그러나, 궤도는 열차의 하중과 진동을 궤도 자신의 변위 축적으로 흡수하고 있다. 결국, 처음부터 틀림이 진행되어 가는 것을 전제로 한 유일한 구조물이다. 일반적으로는 스프링 하 중량과 축중(軸重)이 큰 차량이 빠르고 대량으로 주행하게 되면 궤도 틀림이 발생하여 진행한다. 궤도 틀림 파형의 성장은 궤도 틀림이라고 하는 공간적인 파형의 시간적인 추이라고 하는 2차원적인 취급이 필요하다. (중략)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.4
• /
• pp.344-351
• /
• 2012

A disc spring consists of a conical disc. A load-displacement formula was newly developed in the form of energy method to consider both rigid and friction. The cross section of the disc spring has identical slope angles at the bottom of conical. To solve such a problem, an energy method calculation is proposed. To achieve the goal of this study, the proposed calculation is extended to a disc spring with friction. A firm basis background study based on Almen's work is presented in developing a new numerical approach to predict the available formulation for a disc spring with friction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.572-577
• /
• 2011

A disc spring consists of a conical disc. A load-displacement formula was newly developed in the form of energy method to consider both rigid and friction. The cross section of the disc spring has identical slope angles at the bottom of conical. To solve such a problem, an energy method calculation is proposed. To achieve the goal of this study, the proposed calculation is extended to a disc spring with friction. A firm basis background study based on Almen's work is presented in developing a new numerical approach to predict the available formulation for a disc spring with friction.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.355-360
• /
• 2001

By using Frenet formulation and Timoshenko beam theory, the partial differential equations of motion are derived for a helical spring having a doubly symmetrical cross section subjected to the pre-load axially. These equations of motion are solved to give the dispersion relationship and dynamic stiffness matrix is assembled. Natural frequencies are obtained from the receptance of the system. The results of the dynamic stiffness method are compared with those of the transfer matrix method from published examples and finite element method.