• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.107-115
• /
• 1997

In this paper, a 23 GHz push-push oscillator was designed and fabricated for 23 GHz point-to-point communication using split ring resonator. The split ring resonator was equivalent circuit and numerical method of MPIE(Mixed Potential Integral Equation). The analysis of split ring resonator which coupled between microstrip lines was carried out with transmission-mode using this results. The fabricated oscillator showed the output power of 4 dBm, the 1'st harmonic suppression of -20 dBc, the 3rd harmonic suppression of -34 dBc, a SSB phase noise of -109 dBc / Hz at 1MHz offset frequency from the carrier was achieved and 1.4 percents efficiency at 23 GHz. The experimental outputs were in good results with the theoretical and simulated results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.420-426
• /
• 2008

In this paper, we present RFID Tag Antenna at 433MHz which can be available for RFID system. The antenna is composed of microstrip type antenna, whose dimension could be reduced by applying fractal theory. Simulated return loss and gain at 433MHz are -20.9dB, -3dBi. But there are some deviation on the point of resonance frequency between simulated and measured results. By modifying the antenna's feeding point, we obtain - l5dB return loss and verify the utility of proposed antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.3
• /
• pp.275-283
• /
• 1991

A design method of the new 7${\lambda}$/6 ring 3dB directional coupler using fundamental /6-sections is proposed and its frequency characteristics are analyzed. Furthermore, the experimental verification has been achieved in microstrip network, and hence, the validity of the design method of a microwave compoennt with the basic ${\lambda}$/6-sections proposed in this paper is confirmed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.802-805
• /
• 2003

Structural surface becomes an antenna. The integration of antennas into structural body panels is a new high payoff technology. It emerged from the need to improve structural efficiency and antenna performance. In this paper, we developed new design concept for the structural surface which transmits and receives the electromagnetic signals, and it is termed Surface-Antenna-Structure (SAS). Design procedure was presented including structure design. material selection and design of antenna elements, which was processed according to the communication with KORSAT satellite at Ku-Band (12.25-12.75 GHz). The final demonstration article was 350$\times$200$\times$7.5mm flat antenna panel. Experimental results for antenna performances were in good agreements with design requirements. Also structural analysis was performed with SAS. estimating stress distributions under simply supported condition with Laminated Plate Theories and Wavier Solutions. The SAS concept can be extended to give a useful guide to manufacturers of structural body panels as well as antenna designers. promising innovative future communication technology.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.75-84
• /
• 1997

The up-to-date fatigue strength assessment system for ship structures was developed based on the spectral analysis method and numerical calculation for a membrane type LNG carrier was carried out to verify the effectiveness of the developed system. The wave induced loads acting on the ship's hull were calculated based on strip theory. And introducing the concept of influence factor and 3-D fine mesh structural analysis, direct calculation of long-term distribution of wave induced stress components was realized. Using the derived long term distribution of stress components and Miner-Parmgren's linear damage accumulation rule, fatigue strength of structural components were investigated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.265-268
• /
• 1999

열간 박판 압연공정에서의 압연하중 압연동력을 실시간으로 계산할 수 있는 모델식을 유한요소 해석결과들을 이용하여 개발하였다 압연하중 압연동력값 결정에 비교적 큰 영향을 주는 인자들로는 형상계수 압하률, 률직경 률속도 스트립 입측온도, 탄소함량, 마찰계수들은 이론적으로 계산이 가능한 무마찰의 균일 평면 변형유 압축공정의 금형하중(F、) 동력 (P、)식을 도입함으로써 내삽모델식에서 제외시킬수 있었다 쿨롱마찰계수($\mu$) 0.3 일 경우의 유한요소해석 결과 데이터들을 내삽법(interpolation)을 통해서 다항식 형태로 {{{{ {F } over {F、 } }}}}, {{{{ { {P }_{f } } over { {P }_{d } } }}}}, {{{{ { {P }_{d } } over { {P }^{、 } } }}}} 식들을 구하였다 마찰계수에 따른{{{{ {F } over {F、 } }}}} {{{{ {P } over { {P }^{、 } } }}}}값의 변화는 형상계수에 따라 기울기가 결정되는 직선 형태로 나타내어짐을 유한요소해석 결과로부터 관찰 할 수 있었다. 이와같이 구한 압연하중 압연동력 모델식의 유효성을 검증하기 위해 무작위로 추출한 실제공정들에서 모델식으로 계산한 압연하중 압연동력 값들을 유한요소해석결과와 서로 비교해 보았다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.12
• /
• pp.653-659
• /
• 2001

In this paper, we propose an efficient algorithm for constructing cylindrical panoramic image. At first, we describe a fast image alignment algorithm, which matches image strips located on equal distance for image centers. And then, we explain how to estimate accurately the effective focal length of camera by a bisection method. Although there is a limitation in that the image should be taken by a camera with pure panning motion, the proposed simple and fast algorithm is applicable to practical application.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.4
• /
• pp.39-45
• /
• 1980

내항성이 우수한 선형을 개발하기 위해서는 초기설계단계에서 이미 그 배의 해상에서의 거동을 예측할 수 있어야만 한다. 이 보고서에서는 임의의 입사각을 갖는 규칙파중을 항주하는 선박이 겪게 되는 동요중에서 횡동요, 수평동요 그리고 선수동요의 연성운동방정식의 해를 Tassi-Takaki가 수정한 스트립이론을 적용하여 해석하였다. 제15차 ITTC의 내항성 위원회의 보고서에서 발표된 콘테이너선형에 대한 결과와 똑같이 선형에 대해 본 프로그램을 사용하여 계산한 수평동요, 횡동요 그리고 선수동요의 운동응답을 비교하여 보았으며, 상당히 만족스러운 결과를 얻었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.529-537
• /
• 2006

Multi-layer PCBs are of ien used In compact microwave circuit design as density of PCB layout is increased. In this paper, the crosstalk between coupled lines connected with vias in a 4-layer PCB is investigated theoretically based on the circiuit-concept approach. Coupled lines connected with vias in a 4-layer PCB are divided into three sections, which are coupled microstrip lines and upper via section, center via section, and lower via and coupled microstrip lines section, respectively. Each section is represented by ABCD matrix. By cascading these three ABCD matrices crosstalk between coupled lines connected with vias in a 4-layer PCB is approximately calculated. The validity of this theoretical approach is verified by comparing the calculated results with the simulated ones using HFSS.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.70-75
• /
• 2017

In this paper, we studied the RF characteristics of a voltage-controlled artificial transmission line employing periodically arrayed diodes for application to highly miniaturized wireless communication systems on an MMIC (monolithic microwave integrated circuit). According to the results, the novel voltage-controlled artificial transmission line employing periodically arrayed diodes exhibited a short wave length, which was only 35.2% that of the conventional transmission line, owing to increasing capacitance. In addition, it's effective permittivity and effective propagation constant exhibited considerably higher values than those of the conventional transmission line. Furthermore, attenuation constant of the voltage-controlled artificial transmission line was far higher than that of the conventional transmission line. Using the closed-form equation, we theoretically analyzed the equivalent circuit of the voltage-controlled artificial transmission line.