• Journal of Korea Multimedia Society
• /
• v.7 no.3
• /
• pp.427-437
• /
• 2004

Shape comparison between 3D models is essential for shape recognition, retrieval, classification, etc. In this paper, we propose a method for comparing 3D shapes, which is invariant under translation, rotation and scaling of models and is robust to non-uniformly distributed and incomplete data sets. first, a modal model is constructed from input data using vibration modes and then shape similarity is evaluated with modal strain energy. The proposed method provides global-to-local ordering of shape deformation using vibration modes ordered by frequency Thus, we evaluated similarity in terms of global properties of shape without being affected localised shape features using ordered shape representation and modal strain one energy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.71-76
• /
• 1996

스트레인 게이지 브리지와 한개의 진동변위 탐촉자를 이용하여 평판의 근접장에서 음향 인텐시티를 측정하는 방법에 대하여 설명하였다. 또한 구조감쇠의 모델링을 통하여 음향방사파워에 대한 내부손실파워의 비를 나타내는 계수를 정의하여 내부손실파워의 정도를 평가하는 척도로 사용할 수 있음을 설명하였다. 임의의 경계조건을 가지는 평판에서 2개의 마이크로폰과 1개의 가속계를 이용하여 근사적으로 측정된 음향 인텐시티와 본고에서 제시한 방법으로 측정한 음향 인텐시티가 거의 일치함을 보이므로써 제시된 측정방법의 타당성을 검증하였다. 실험에 사용된 계(system)는 일반적인 해석에서 유체부하를 무시할 수 있는 계로 평판내부의 에너지 흐름에 비하여 외부로 방사되는 소음의 에너지 흐름이 매우 작기 때문에 평판내부의 에너지 흐름으로부터 방사되는 소음의 에너지 흐름을 알아내는 것이 매우 어려울 것으로 예상되었으나 본고에 제시된 방법으로 좋은 결과를 얻을 수 있었다. 앞으로 본 방법의 측정 오차에 대한 면밀한 고찰이 있어야 할 것이다. 그리고 평판의 내부손실이 비교적 큰 경우에 본 방법의 실험적으로 검증이 필요할 것이다. 또한 실질적인 문제에 응용되어 얼마만큼 유용한 정보를 제공할 것인가를 살펴보아야 할 것이다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.50-55
• /
• 2013

In order to understand the biomaterial like the blood vessel of artery, there is a need to quantify the biomechanical behavior of the vessel. However, theoretical framework to describe and quantify the behaviour of blood vessel was not well established so far. For studying the biomechanical behavior of artery, Rubber-liked material which is similar to passive artery is selected since conventional theoretical interpretation is very limited to understand and predict the behavior of biomaterial. Rubber-like material is assumed to be very similar to artery and has properties of isotropy, homogeneity and is undergoing large deformation. Based on this assumption, stress developed on Rubber-like material is described by strain energy function and strain invariants which are required to understand the nonlinear elastic behavior of biomaterial. The descriptor which would be used for understanding the biomechanical behavior of artery is studied in this work.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.115-118
• /
• 1995

We predict the magnetization curves with strains in thin films. It is possible to predict the magretoelastic ani¬sotropy erergy which generates the changes of the M-H curves in thin films. We show the prediction of M-H curves in case of isotropic films such as polycrystalline am amorphous thin films as well as single crystal cubic films.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.337-340
• /
• 2008

포항공과대학교의 포항풍력에너지연구소(PoWER Center)가 개발에 참여했던 750 kW급 직결형 국산화 풍력발전 시스템의 상용화를 추진하기 위한 출력성능 및 하중 측정을 통한 실증연구가 대관령의 풍력실증단지에서 수행되었다. IEC 61400-13의 규격을 기준으로 수행된 하중 측정의 일환으로 스트레인 게이지의 기계적 하중에 대한 외부 하중부가에 의한 기계적 보정이 추진되었다. 기계적 보정의 수행 중 일부스트레인 게이지가 단락되는 사고가 발생하였으나 비교보정을 통하여 기계적 보정작업을 완수할 수 있었다. 본 논문에서는 외부 하중부가에 의한 기계적 하중의 보정절차를 소개하고, 수행된 기계적 보정시험 과정에 대해 상세히 설명하며 기계적 보정의 결과를 보고한다.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.2
• /
• pp.168-177
• /
• 2024

When designing an underwater Piezoelectric Energy Harvester (PEH), Vortex Induced Vibration (VIV) is generated throughout the cantilever through a change in curvature, and the generation of VIV increases the vibration displacement of the curved cantilever PEH, which is an important factor in increasing actual power. The material of the curved PEH selected a Polyvinyline Di-Floride (PVDF) piezoelectric film, and the flow velocity is set at 0.1 m/s to 0.50 m/s for 50 mm, 130 mm, and 210 mm with various curvatures. The strain energy change of PEH by VIV was observed. The smaller the radius of curvature, the larger the VIV, and as the flow rate increased, more VIV appeared. Rapid shape transformation due to the small curvature was effective in generating VIV, and strain energy, normalized voltage, average power, etc. To increase the amount of power of the PEH, it is considered that the average power will increase as the number of curved PEHs increases as well as the steep curvature is improved.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1044-1056
• /
• 1991

본 연구에서는 균일압축력을 받으며 네변이 단순지지된 비균일 두께를 가진 평판의 좌굴응력을 Rayleigh-Ritz방법으로 해석하여 평판두께를 적절히 분포함으로써 동일한 평판중량으로 더 큰 좌굴하중을 얻을 수 있음을 보이며 또한 동일한 문제를 NASTRAN프로그램을 사용하여 해석함으로써 그 정확도를 입증한다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.130-131
• /
• 2002

Terfenol-D는 상온에서 변형이 가장 큰 재료로 알려져 있고, 자기역학적 결합계수 k$_{33}$=0.75로 매우 높기 때문에 전기에너지를 역학적 에너지로 효율적으로 변환시킬 수 있다[1]. 단점으로는 압축강도는 700 ㎫로 높으나, 인장강도 30 ㎫로 매우 낮아서 재료가 brittle하여 장치 설계 시 세심한 주의가 필요하며, 재료의 상대투자율이 3~10정도로 낮기 때문에 자기폐회로를 구성하는데 어려움이 있다[2-4]. (중략)략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.219-222
• /
• 2004

This research is about SDM (Structural Dynamics Modification) technique using embosses. SDM using embosses do not need to add additional mass element ana model of embosses and resulting huge calculation for getting analytical solution of an embossed structure. The object of this research is to suggest a method to guide placing embossment in a structure to raise its natural frequencies. Two methods to optimize model with embossing are suggested, indepuldently. The former is response surface analysis by neural network. And the latter is an indirect method using modal dynamic strain energy.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.280-286
• /
• 2011

In this research, the oil detection method and the characteristic of sensor using the selective reaction of silicone rubber in response to hydrocarbon oil will be described. As a sensing principle, the swelling property of silicone rubber in response to hydrocarbon fuel is used, also a strain gauge is used to transduce the volume change to an electrical signal. The sensor core is manufactured with a strain gauge embedded in silicone rubber by the curing process and experiments for characteristics of sensor core with various oils were carried out. It is shown that the sensor core can be used as an oil spill detection sensor. Also, for the application to the sea area, a buoy type sensor platform is integrated with a sensor core and a strain amplifier and it is tested in the simulated oil spill condition. In this study, it is proven that the integrated sensor can be used for the detection of various oils.