• 한국산업정보학회논문지
• /
• 제18권4호
• /
• pp.37-41
• /
• 2013

본 논문에서는 AHRS(Attitude and Heading Reference System) 센서를 이용하여 스튜어트 플랫폼으로 구성된 평면의 평형상태를 유지시키는 시스템을 소개한다. 움직이는 선박이나 차량에서 구조물이 지면의 기울기에 상관없이 항상 평형상태를 유지하도록 하기 위하여 자세 제어를 하는 역학적 기기로 스튜어트 플랫폼을 사용하였다. 그리고 현재의 기울어진 각도를 알아내고 보정하기 위하여 AHRS 센서를 이용하였다. AHRS센서와 스튜어트 플랫폼 제어 간의 피드백 시스템을 구성하여 자동으로 스튜어트 플랫폼의 위쪽 판넬이 평형을 이루는 시스템을 제작하였다.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6090-6097
• /
• 2013

본 연구의 목적은 실감나는 운전 환경을 제공하는 공기압 구동식 드라이빙 시뮬레이터 개발에 있다. 드라이빙 시뮬레이터의 모션 플랫폼은 운전자에게 실제 차량의 사실적인 느낌을 주는 메카트로닉스 장비이다. 모션 플랫폼의 비용은 드라이빙 시뮬레이터를 개발하는데 가장 큰 부분을 차지한다. 저비용으로 모션 플랫폼을 개발하기 위하여 6개의 공압 실린더로 구성된 스튜어트 플랫폼 형태를 기반으로 모션 플랫폼을 자체 제작하였다. 스튜어트 플랫폼은 조이스틱의 작동신호에 대한 응답으로 만족할 만한 추종성능을 보여주었다. 상용의 레이싱 게임 소프트웨어 중의 하나인 rFactor를 이용하여 드라이빙 시뮬레이터의 가능성을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.497-498
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.79-80
• /
• 2007

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.156-162
• /
• 2001

An effective and practical method is presented for solving the forward kinematics of a 6-DOF Stewart Platform, using neural network algorithm together with Newton-Raphson method. An approximated solution is obtained from trained neural network, then it is used as an initial estimate for Newton-Raphson method. A series of accurate solutions are calculated with reasonable speed for the entire workspace of the platform. The solution procedure can be used for driving a real-time simulation platform.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.255-258
• /
• 2001

This introduces a improved method of the forward kinematics analysis, which finds the 6DOF motions and velocities from the given six cylinder lengths in the Steward platform. The numerical method(Newton Raphson Mehotd)of the forward kinematics analysises has the disadvantage of the long calculated time. To overcome this, we propose the competitive method that determine a proper initial value. Through the competitive method, we can select a proper initial value so that the calculate time is reduced. therefore we can give the property of the real time process to the forward kinematics analysis. We show the result comparing between general Newton-Raphson method and proposed one. From the result we verify the performance of the proposed method.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1632-1642
• /
• 1994

The Stewart Platform is a six-degree-of-freedom in-parallel-actuated manipiulator mechanism. The kinematic behavior of parallel mechanisms shows inverse characteristics as compared that of serial mechanisms; i.e, the inverse kinematic problem of Stewart Platform is straightforward, but no closed form solution of the forward kinematic problem has been previously presented. Thus it is difficult to calculate the 6 DOF displacement of the platform from the measured lengths of the six actuators in real time. Here, a real-time estimation algorithm which solves the Stewart Platform kinematic problem is proposed and tested through computer simulations and experiments. The proposed algorithm shows stable convergence characteristics, no estimation errors in steady state and good estimation performance with higher sampling rate. In experiments it is shown that the estimation result is the same as that of simulation even in the presence of measurement noise.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.339-352
• /
• 2001

The inverse kinematics problem of Stewart platform is straightforward, but no closed form solution of the forward kinematic problem has been presented. Since we need the real-time forward kinematic solution in MIMO control and the motion monitoring of the platform, it is important to acquire the 6 DOF displacements of the platform from measured lengths of six cylinders in small sampling period. Newton-Raphson method a simple algorithm and good convergence, but it takes too long calculation time. So we reduce 6 nonlinear kinematic equations to 3 polynomials using Nairs method and 3 polynomials to 2 polynomials. Then Newton-Raphson method is used to solve 3 polynomials and 2 polynomials respectively. We investigate operation counts and performance of three methods which come from the equation reduction and Newton-Raphson method, and choose the best method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.541-547
• /
• 2000

This paper presents the closed-form forward kinematics of the 6-6 Stewart platform of planar base and moving platform. Based on algebraic elimination method and with one extra linear sensor, it first derives an 8th-degree univariate equation and then finds tentative solution sets out of which the actual solution is to be selected. In order to provide more exact solution despite the error between measured sensor value and the theoretical one, a correction method is also used. The overall procedure requires so little computation time that it can be efficiently used for realtime applications. In addition, unlike the iterative schemes e.g. Newton-Raphson, the algorithm does not require initial estimates of solution and is free of the problems that it does not converge to actual solution within limited time. The presented method has been implemented in C language and a numerical example is given to confirm the effectiveness and accuracy of the developed algorithm.

• 한국항공운항학회지
• /
• 제28권4호
• /
• pp.125-131
• /
• 2020

In order to study the correlation between the pilot's cognitive ability and recovery ability by applying a physical element that can cause spatial loss of position to the pilot, a turntable was installed on the top of the motion system to give a quantitative rotational error. We propose a method of simulating flight movement to reduce a difference in feeling and an intuitive method of forward kinematic analysis.