• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.962-968
• /
• 2008

An experimental study of the aerodynamic characteristics of a stealth configuration, the test techniques developed for the testing in the Low Speed Wind Tunnel of Agency for Defense Development(ADD-LSWT), and the lessons learned have been presented. The main objectives of this test are to determine the aerodynamic characteristics of a stealth configuration and to measure the flow field characteristics with a 5-hole pressure probe. The test results are discussed and the effect of the leading edge shape on the aerodynamic characteristics is also given.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.86-91
• /
• 2008

An integrated multidisciplinary analysis and design system plays a critical role in the preliminary design of an aircraft. In this work a system based on the CATIA is developed for multidisciplinary computational design; aerodynamics, elasticity, and radar frequency stealth. Common data base of geometry and rectangular grids is generated and used for aerodynamic and structural analysis, while derivative triangular grids are generated for the RCS calculation. The panel method (PANAIR), FEM (NASTRAN), and PO technique are used for aerodynamic, structural, and RF stealth computations, respectively, and several additional algorithms are developed for the effective communication of the common data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.467-473
• /
• 2007

Flow visualization study to qualitatively define the flow field over a stealth UCAV(Uninhabited Combat Air Vehicle) configuration in a water tunnel has been conducted to clarify the basic aerodynamic performance. The test was performed at freestream velocity of 12.7 cm/sec which was corresponding to a Reynolds number of $1.4{\times}10^4$ based on mean aerodynamic chord. The development and breakdown of vortices illuminated by using dye were compared to the previous force and moment data. It was shown that the effect of the vortices generated by the main-body and junction are dominant in the low angle-of-attack region. However, in the high angle-of-attack region, the vortex generated by the fore-body mainly influenced the aerodynamic performance of the model.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.27-35
• /
• 2019

Stealth technology is a technique to avoid detection from detectors such as radar and infrared seekers. In particular, detection by infrared signature is more threatening because infrared missiles detect heat from the aircraft itself. Therefore, infrared stealth technology is essential for ensuring the survival of aircraft and unmanned combat aerial vehicles (UCAV). In this study, we analyzed aerodynamic and infrared stealth performance in relation to UCAV nozzle design. Based on simulation results, a double serpentine nozzle was effective in reducing the infrared signature because it could shield high-temperature components in the engine. In addition, we observed that the infrared signature was reduced at the turning position of the duct located at the rear part of the double serpentine nozzle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.81-92
• /
• 2019

Stealth means the reduction of all signature including the reflection/emission of radar, infrared, visible light and audio signals. Stealth aircraft can significantly improve the penetration capability, the combat survivability and the mission effectiveness. This paper presents the basic concept, the key elements and the application examples of stealth aircraft technology. Also it briefly describes the effect of the modern stealth aircraft on the future air warfare.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.809-819
• /
• 2020

In this study, the twist angle and wing planform shapes were selected as design variables and optimized to secure the stability of the flying-wing type UAV. Flying-wing aircraft has no separated fuselage and tails, which has advantages in aerodynamic characteristics and stealth performance, but it is difficult to secure the flight stability. In this paper, the sweep back angle and twist angle were optimized to obtain the lateral stability, the static margin and wing planform shapes were optimized to improve the longitudinal stability of the flying-wing, then effect of the twist angle was confirmed by comparing the stability of the shape with the winglet and the shape with the twist angle. In the optimization formulation, focusing on improving stability, constraints were established, objective functions and design variables were set, then design variable sensitivity analysis was performed using the Sobol method. AVL was used for aerodynamic analysis and stability analysis, and SQP was used for optimization. The CFD analysis of the optimized shape and the simulation of the dynamic stability proved that the twist angle can be applied to the improvement of the lateral stability as well as the stealth performance in the flying-wing instead of the winglet.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.387-392
• /
• 2013

본 연구에서는 천음속 전투기 무장창 내부의 압력 진동을 제어하기 위해 F-111의 무장창을 2차원 공동(Cavity)으로 모델링하고, EDISON_전산열유체 시스템을 활용하여 공동의 형상 변화에 따라 발생하는 유동 특성을 분석하였다. 최근의 전투기들은 항력 감소와 스텔스 기능을 위해 무기를 기체 안에 내장하는데, 덮개를 열 때 발생하는 공동 형상에 의해 강한 압력 진동이 유발된다. 이러한 진동은 무장창과 주변 기계 장치에 구조적 진동을 일으키고 고장 또는 파괴를 유발하므로, 근본적인 해결책이 필요한 중요한 문제이다. 본 연구에서는 진동의 원인이 되는 전단층(Shear layer) 불안정성을 해결하기 위해 기존에 연구된 형상(Leading edge extension 및 Ramp)과 본 연구에서 새로 제안한 Ramp extension을 적용해 보았다. 그 결과 압력 진동의 원인이 되는 유동 특성이 줄어들고 압력 진동 역시 감소했음을 관찰할 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.6 s.150
• /
• pp.693-699
• /
• 2006

This paper proposes a design optimization technique for ship RCS signature reductions using Taguchi method. The proposed technique comprises of i)evaluating initial RCS signatures, ii)defining critical areas which should be modified as design parameters, and threat factors which can't be controlled artificially as noise parameters, and finally iv)finding optimum parameters via analyzing signal to noise ratios for designated characteristics. We applied the technique to a model ship and found that it is suitable for radar stealth designs. In addition, the proposed technique is applicable to submarine designs against sonar threats.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.417-423
• /
• 2012

Radar Cross Section(RCS) is a measure of how detectable an object is with a radar. A larger RCS indicates that an object is more easily detected. Informally, the RCS of an object is the cross-sectional area of a perfectly reflecting sphere that would produce the same amount of reflection strength as the object in question would. In order to estimate RCS of aircraft weapons the external surface is modeled as a collection of simple shape elements. And the overall RCS is estimated as a vector sum of configuring elements' cross-sections which are well known given by analytic formulae. A RCS estimation code is developed for a typical shape of Air-To-Surface bombs and missiles. Size of weapons and location of fins are implemented in the code in addition to the presence of canards. The ability to predict radar return from flying vehicles becomes a critical technology issue in the development of stealth configurations. This simplified method of RCS estimation is known to be fast and accurate enough in an optical region of high frequency incident radio wave.

• Composites Research
• /
• v.23 no.2
• /
• pp.17-23
• /
• 2010

The stealth technology can increase the survivability of aircrafts or warships and enhance the capability of mission completion in hostile territory. The purpose of this paper is to present the low observable structure with curved surfaces made by fiber-reinforced composites and to show the possibility of developing omnidirectional stealth platforms for military applications. In this study, we developed a radar absorbing structures(RAS) based on a circuit analog absorber to reduce the radar cross section(RCS) of an object with curved surfaces. Firstly, the RAS with a periodic square patterned conducting polymer layer was designed and simulated using a commercial 3-D electromagnetic field analysis program. Secondly, the designed semi-cylindrical structure with low RCS was fabricated using fiber-reinforced composites and conducting polymer. To make the periodic pattern layer, acts as resistive sheet, the intrinsic conducting polymer paste containing PEDOT with a polyurethane binder was used. Finally, the radar cross section was measured to evaluate the radar absorbing performances of the fabricated RAS by the compact range facility in POSTECH.