• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.238-240
• /
• 2002

스크린 인쇄법으로 전계 발광 소자를 제작하였으며, 고온 다습의 THB 시험을 통해 신뢰성을 평가하였으며, 고전계인가시 소자 표면에 발생된 흑점을 SEM, EDX를 통해 분석하였다. 배면 보호층의 종류와 도포 방법과 도포 횟수에 따른 정전용량, 유전손실, 휘도의 특성을 조사하였다. 이방성 접착제를 사용하여 단자의 종류에 따른 특성을 평가하였고, 단자 접착력에 따른 전기적인 특성을 조사하였다.

• 한국인쇄학회지
• /
• 제30권1호
• /
• pp.47-58
• /
• 2012

The inorganic powder EL lamp was made by screen printing technique with a phosphor ink and a dielectric ink. Value of color coordinates X and Y increased under the condition of supplying driving power to the inorganic powder EL lamp and changing voltage with constant frequency. When frequency was changed under the constant voltage, value of color coordinates X and Y were decreased with increasing frequency. However, level of change of color coordinates X was different from color coordinates Y. When voltage was increased under constant frequency, changing degree of color coordinates X and Y shows similarity. But under the constant voltage with changing frequency, color coordinates X and Y were differently changed that degree of change of color coordinates Y showed five times more than that of color coordinates X. As increasing thickness of phosphor ink and dielectric ink, level of voltage and frequency, color coordinates X and Y were slightly changed. According to the thickness of phosphor ink and dielectric ink, and level of voltage and frequency, color coordinate of color light was changed. Frequency was most important element influencing on the change of color coordinate.

• 한국전기전자재료학회논문지
• /
• 제24권5호
• /
• pp.374-380
• /
• 2011

In this paper a printing process for patterning electrodes on large area substrate was developed by combining screen printing with reverse off-set printing. Ag ink was uniformly coated by screen printing. And then etching resist (ER) was patterned in the Ag film by reverse off-set printing, and then the non-desired Ag film was etched off by etchant. Finally, the ER was stripped-off to obtain the final Ag patterns. We extracted the suitable conditions of reverse Using the process we successfully fabricated gate electrodes and scan bus lines of OTFT-backplane used for e-paper, in which the diagonal size was 6 inch, the resolution $320{\times}240$, the minimum line width 30 um, and sheet resistance 1 ${\Omega}/{\Box}$.

• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.33-44
• /
• 2011

The inorganic powder EL lamp was made by screen printing technique with a phosphor ink and a dielectric ink. The thickness of a phosphor ink layer and a dielectric ink layer is $35{\mu}m$ and $54{\mu}m$ respectively. A increasing ratio of the luminance of inorganic powder EL lamp to be a 1P1PD-phosphor ink layer in which increased voltage at constant frequency is higher 12% than when increased frequency at constant voltage. It is higher 57% than when increased frequency at constant voltage that the rate of increase of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer in which increased voltage at constant frequency. Finally, when increased voltage at constant frequency, a increasing ratio of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer is higher about 40% than that to be a 1P1PD-phosphor ink layer.

• 한국인쇄학회지
• /
• 제22권1호
• /
• pp.53-64
• /
• 2004

The CRT(cathode ray tube) in oscilloscope consists of an electron gun, horizontal vertical deflection system and a phosphor screen. When the electron beam strikes the phosphor screen, the phosphor generates light. The phosphor screen has formed by CRT precipitation method. But, this method has some defects that are complex process, low yield, much consumption of raw-material, dirty working environment, waste problem, require of high cost. Moreover phosphor for oscilloscope used at present has been imported from Japan. Therefore developments of new phosphor and new method(the screen printing) top form phosphor screen for oscilloscope are required to improve these matters. This study was developed novel method(the screen printing) to form the phosphor screen for oscilloscope used new phosphor. This screen printing method has advantages of simple process, high yield, clean working environment, saving raw material and running-cost.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.14-21
• /
• 2003

Rapid prototyping(RP) has been used for design verification and proto sample or mold manufacturing. Many RP systems have been introduced into the market during the past 15 years. However, until now, the systems have used mainly for external physical models (mono function), and have the basic but critical limitation of one material on one stage (mono material). To overcome the limitations of mono-material and mono-function of conventional. RP systems, the concept of Functional Phototype Development (FPD) is newly proposed in this paper FPD provides the necessary prototype functions such as mechanical, optical, chemical and electrical properties in order to meet the broad requirements of the industry. The paper illustrates the representative achievements of electronic components such as the multi-layer printed circuit board(MLB). Experimental results demonstrate that FPD has great potential applied to broad industrial uses and that It Will be a powerful tool in the neat future.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.109-112
• /
• 2003

인터넷 사용중 인쇄를 하였을 때 만족스러운 결과를 가지지 못하는 것은 스크린 상의 page와 인쇄물의 page들이 다르게 나타나기 때문이다. HTML과 CSS는 브라우저 기반의 정보를 표현하는데 있어 적합하고 충분하지만, 인쇄기 반의 정보를 표현하는데는 부족하다. 그래서 사용되는 것이 XSL-FO(XSL Formatting Object) 이다. 고품질의 출력과 출력장치에 무관한 인쇄에 있어서 PostScript가 사용되고 있다. 본 논문에서는 XML-FA 와 Postscript의 장점을 이용해 사용자가 원하는 결과물을 갖는 것과, XML문서의 XML-FA 와 Postscript의 Segment간의 대응 관계를 분석하고 매핑시킴으로써 Postscript로 변환의 기술을 연구하였다. 변환 결과로 기존 인쇄물 보다 더 나은 결과물을 얻을 수 있었다.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.87-99
• /
• 2010

The ink which is left by sealed more than 6 months, it clogs head nozzle of machine due to precipitation and coagulation. In addition, if you stop printing about 3~4 hours in the middle of printing work, the head nozzles of printer could be naturally clogged. To prevent of this situation, worker should implement cleaning and checking head nozzle before hands. When the nozzle is clogged in the middle of work, running a head cleaning mode can clear the clogged nozzle. Yet, large amount of waste inks which are passed clogged nozzle will be remained after cleaning. It would be very nice that ink companies take the waste ink back by green marketing, but none of them are doing it currently. The purpose of this research is that making a black water-based recycle ink by waste inks which are left of nozzle clogging or passed expiration date. This recycle ink will improved working environment and reduce cost of disposing waste inks. Furthermore, it is very environment friendly and economical. It is called a recycle ink which is water-based black ink made by waste inks.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.30-35
• /
• 2004

스크린 인쇄법 및 PZT sol 처리의 복합공정을 적용하여 $30{\mu}m$ 두께의 PMW-PZT 후막을 Pt/$TiO_2$/$SiN_x$Si 기판위에 제작하였다. 그 결과 PZT sol 처리 횟수가 증가함에 따라 후막의 소결 밀도가 증가하고 전기적, 압전 특성의 증진되는 것을 관찰할 수 있었다. $800^{\circ}C$에서 소결한 10회 sol 처리한 PMW-PZT 후막은 745의 유전상수 및 155 pC/N의 $d_33$ 값을 나타내었다.

• 한국세라믹학회지
• /
• 제38권10호
• /
• pp.948-952
• /
• 2001

스크린 인쇄법으로 알루미나 기판 위에 PZT 후막을 제조하였으며, 공기 또는 Pb 분위기의 $750{\sim}1050^{\circ}C$에서 1시간 동안 소결하여 소결 조건이 후막의 물성에 미치는 영향을 조사하였다. 공기 중에서 $950^{\circ}C$ 이상의 온도로 소결한 PZT 후막에는 파이로클로 상이 제 2상으로 존재하고 있었으며, Pb분위기에서 소결한 PZT 후막이 공기 중에서 소결한 후막보다 치밀한 미세구조와 큰 유전상수 그리고 잘 발달된 P-E 이력특성을 보였다. $900^{\circ}C$의 Pb 분위기에서 소결한 PZT 후막은 잘 포화된 전형적인 강유전 P-E 이력곡선 모양을 보였으며, 잔류분극과 항전계가 각각 $29.8{\mu}C/cm^2$, 48.4 kV/cm이었다.