• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.496-500
• /
• 2009

소하천은 하천 네트워크의 최상류에 넓게 소재하는 하천이다. 본 연구의 목적은 올바른 소하천 수생태계 관리방안을 도출하기 위하여 소하천의 건강성을 분석하고 현행 소하천 관리제도의 개선점을 모색하는 것이었다. 본 연구에서는 다음과 같은 분석방법을 이용하였다. 첫째, 2007년 한강수계 소하천 28개 지점에서의 부착조류($DAI_{PO}$, TDI), 저서성 대형무척추동물(KSI), 어류(IBI), 서식환경, 수변환경 등 6개 항목에 대한 수생태 건강성 조사결과를 토대로 공간적 분포와 수질현황을 조사하여 소하천에 대한 종합적인 건강성 평가를 실시하였다. 둘째, 분석대상지역을 각각 소하천 구간스케일(28개 지점)과 유역스케일(팔당호, 안성천 유역)로 선정, 하천차수도(1:25,000)를 활용하여 해당 구간과 유역의 소하천도를 작성하였다. 셋째, 작성된 소하천도 는ArcGIS(ver. 9.3)에서 30, 60, 90, 120, 150-m Buffering을 하였다. 다음으로 소하천 구간은 중분류(23개 항목, $2000{\sim}2006$ 또는 2007년) 토지피복도를, 팔당호 및 안성천 유역의 소하천은 대분류(8개 항목, $1975{\sim}2000$년) 토지피복도를 적용하여 분류항목별 면적변화비율을 산정하였다. 끝으로 소하천 정비에 대한 제도적 문제점을 분석하여 소하천 관리의 개선점을 연구하였다. 그 연구 결과, 첫째 연구대상 소하천(28개)의 건강성은 도심 소하천에서 가장 낮게 조사되었고, 일부 소하천은 비록 상류에 위치함에도 불구하고 부착조류의 유기물, 영양염류 평가가 낮게 평가되었다. 둘째, 소하천 구간 스케일의 수변토지피복변화 분석결과 소하천 수생태 건강성은 거시적으로 산림, 도시화, 밭 등의 피복변화에 민감한 것으로 나타났으며 도시화 피복변화의 영향은 수변 30m에서 60m보다 3배 정도 큰 것으로 나타났다. 유역 스케일 분석에서는 상대적으로 도시화가 많이 진행된 안성천 유역의 소하천이 팔당호 유역보다 낮은 건강성일 것으로 예측되었다. 결론적으로 적절한 소하천 수변관리는 지역 하천의 건강성을 온전히 회복시키고 개선 유지하기 위한 중요한 수단들 중에 하나이며 수변토지피복의 변화율은 (소)하천 건강성 또는 유역관리의 지표로 활용될 수가 있는 것으로 조사되었다. 이와 더불어 본 연구를 통해 소하천 복원 및 관리는 소하천 특성을 고려한 장기적인 계획과 관리대상의 우선순위를 바탕으로 점진적인 대안마련이 필요할 것으로 사료된다.

• Journal of KIISE:Databases
• /
• v.34 no.5
• /
• pp.409-419
• /
• 2007

Database community focuses on the similar music retrieval systems for music database when a humming query is given. One of the approaches is converting the midi data to time series, building their indices and performing the similarity search on them. Queries based on humming can be transformed to time series by using the known pitch detection algorithms. The recently suggested algorithm, scaled and warped matching, is based on dynamic time warping and uniform scaling. This paper proposes Humming BIRD(Humming Based sImilaR mini music retrieval system) using sliding window and center-aligned scaled and warped matching. Center-aligned scaled and warped matching is a mixed distance measure of center-aligned uniform scaling and time warping. The newly proposed measure gives tighter lower bound than previous ones which results in reduced search space. The empirical results show the superiority of this algorithm comparing the pruning power while it returns the same results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.5
• /
• pp.42-54
• /
• 2008

The objective of this study is to critically examine the result and the quality of urban park design as infrastructure by analyzing the landscape architectural design competition for Cheongna New City, which was organized by the Korea Land Corporation. This paper is meaningful in that it broadly examines several recent design competitions for urban parks, thereby discussing what the future urban park should be. This study explores the existing analysis methods of design competitions in order to establish a comprehensive method of analysis for the Cheongna competition. Through reinterpreting the concept of the urban park as infrastructure and the design strategies of landscape urbanism, nine key words and a framework for the analysis of urban park design are established. By analyzing the guidelines for the competition, five key words; networking, site, ecology, scale, and infrastructure have been selected and are used as the framework of analysis for the competition. The analysis of the contestants of the competition based on the proposed analysis method leads to a few implications for urban park design as infrastructure: networking and scale from the perspective of the development site; the creation of a sense of place and symbolism in creating the urban image; planning for an ecological urban environment; focus on the significance of the urban park as infrastructure. These implications are highlighted and discussed by the contestants through a variety of experiments. These ideas, however, are provided as a simple configuration of shapes and conceptual explanations and fail to be developed into synthetic, practical strategies.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.18-31
• /
• 2012

This paper proposes a matching engine of query-by-singing/humming (QbSH) system which retrieves the most similar music information by comparing the input data with the extracted feature information from polyphonic music like MP3. The feature sequences transcribed from polyphonic music may have many errors. So, to reduce the influence of errors and improve the performance, the chroma-scale representation, compensation and asymmetric DTW (Dynamic Time Warping) are adopted in the matching engine. The performance of various distance metrics are also investigated in this paper. In our experiment, the proposed QbSH system achieves MRR (Mean Reciprocal Rank) of 0.718 for 1000 singing/humming queries when searching from a database of 450 polyphonic musics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.239-245
• /
• 2013

The data retention characteristics depending on neighbor cell's threshold voltage (Vt) in a multilevel NAND flash memory is studied. It is found that a Vt shift (${\Delta}Vt$) of the noted cell during a thermal retention test is increased as the number of erase-state (lowest Vt state) cells surrounding the noted cell increases. It is because a charge loss from a floating gate is originated from not only intrinsic mechanism but also lateral electric field between the neighboring cells. From the electric field simulation, we can find that the electric field is increased and it results in the increased charge loss as the device is scaled down.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2385-2390
• /
• 2009

N-doped ZnO thin films with c-axis preferred orientation were prepared on p-Si(100) wafers, using an RF magnetron sputter deposition. For ZnO deposition, $N_2O$ gas was employed as a dopant source and various deposition conditions such as $N_2O$ gas fraction and RF power were applied. The depth pofiles of the nitrogen [N] atoms incorporated into the ZnO thin films were investigated by Auger Electron Spectroscopy(AES) and the nano-scale structural characteristics of the N-doped ZnO thin films were also investigated by a scanning electron microscope (SEM) technique.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.111-120
• /
• 2016

Wire recognition is one of the important tasks in chip reverse engineering since connectivity comes from wires. Recognized wires are used to recover logical or functional representation of the corresponding circuit. Though manual recognition provides accurate results, it becomes impossible, as the number of wires is more than hundreds of thousands. Wires on a chip usually have specific intensity or color characteristics since they are made of specific materials. This paper proposes two stage wire recognition scheme; image binarization and then the process of determining whether regions in binary image are wires or not. We employ existing techniques for two processes. Since the second process requires the characteristics of wires, the users needs to select the typical wire region in the given image. The histogram characteristic of the selected region is used in calculating histogram similarity between the typical wire region and the other regions. The first experiment is to select the most appropriate binarization scheme for the second process. The second experiment on the second process compares three proposed methods employing histogram similarity of grayscale or HSV color since there have not been proposed any wire recognition method comparable by experiment. The best method shows more than 98% of true positive rate for 25 test examples.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.397-402
• /
• 2013

In this study, numerical hull form development of a platform supply vessel, a full scale with the overall length of 26.75m, was performed to predict a bare-hull resistance and a large scale of model tests with a 1/10 scaled model were conducted to verify the success of numerical results. Numerical analysis on heave and pitch motion as a function of encounter frequency and ship's speed for the prediction of seakeeping characteristics are also presented. The experiment results of resistance agreed well with numerical analysis. As a result in the motion response characteristics, the heave RAO indicates high values with the range of encounter frequency 1.8~2.0. The Pitch RAO indicates high motion response characteristics at Beaufort scale No. 3 and 4 in rough seas.

• Journal of Energy Engineering
• /
• v.18 no.2
• /
• pp.125-131
• /
• 2009

Physical characteristics of metals such as hardness, wear-resistance and corrosion-resistance can be artificially controlled by ion implantation. The interaction between ion and solid surface was modeled in molecular scale and simulated by the molecular dynamics method in order to understand the ion implantation mechanism. From the microscopic point of view, the molecular behaviors were observed for improving characteristics of ion implantation. For these purposes, the implantation mechanism and the influences of incident energy, surface temperature and molecular weight were discussed in this study. As the results, the penetration probability was even decreased if incident energy was exceeded any values in the case of high temperature of solid surface. Moreover, it was confirmed that ion implantation into solid surface with amorphous state could be more effective for some conditions.

• Composites Research
• /
• v.33 no.4
• /
• pp.198-204
• /
• 2020

In this study, we employ the full atomistic molecular dynamics simulation and finite element homogenization method to predict the thermo-mechanical properties of nanocomposites including carbon nanotube bundle. As the number of carbon nanotubes within the single bundle increases, the effective in-plane Young's modulus and in-plane shear modulus decrease, and in-plane thermal expansion coefficient increases, despite the same volume fraction of carbon nanotubes. To investigate the thickness of interphase zone, we employ the radial density distribution. It is investigated that the interphase thickness is almost independent on the number of carbon nanotubes within the single bundle. It is assumed that the matrix and interphase are isotropic materials. According to the predicted thermo-mechanical properties of interphase zone, the Young's modulus and shear modulus of interphase zone clearly decrease, and the thermal expansion coefficient increases. Based on the thermo-mechanical interphase behavior, we developed the multiscale homogenization model to predict the thermo-mechanical properties of PLA nanocomposites that include the carbon nanotube bundle.