• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.185-190
• /
• 2010

This paper presents the estimation on switching technique via output power source analysis of power conversion unit in electric railway vehicle. The focus of this study suggested an alternative on critical problems by using head electric power(HEP). To achieve this, we have measured output power of HEP, and measurement devices set up at output of transformer connected HEP to analysis quality on output power source of head electric power(HEP) unit in electric railway vehicle. Using results of measurement of it, parameters are assumed for simulation to confirm estimation on switching technique. It is confirmed that switching technique is Selected Harmonic Elimination PWM(SHEPWM) and inverter switching frequency is less than 500[Hz]. Throughout experiment and simulation, it is estimated that switching technique used HEP is advanced SHEPWM and switching frequency is about 300[Hz]. Also leakage inductance in transformer is about $180[{\mu}H]$ less than $365[{\mu}H]$ known.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.819-832
• /
• 2017

We propose a new switching control scheme for a ball and beam system by utilizing two linearization methods. First, the Jacobian linearization is applied and state observer is developed afterward. Then, motivated [6], the approximate input-output linearization is carried out, and after that, the Jacobian linearization is applied along with the design of state observer. Since the second approach requires two linearizations, it is called a two-step linearization method. The state observer is needed for the estimation of the velocities of ball and motor movement. Since the Jacobian linearization based controller tends to provide faster response at the initial time, and after that, the two-step linearization based controller tends to provide better response in terms of output overshoot and convergence to the origin, it is natural to give a switching control scheme to provide the best overall control response. The validity of our control scheme is shown in both simulation and experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.322-331
• /
• 2002

In this paper, a single-phase to three-phase PWM converter topology using a single-phase half-bridge PWM rectifier and a 2-leg inverter for low cost three-phase induction motor drives is proposed. In addition, the source voltage sensor is eliminated with a state observer which controls the deviation between the model current and the system current to be zero. The converter topology is of lower cost than the conventional one, which gives sinusoidal input current, unity power factor, dc output voltage control, bidirectional power flow and VVVF output voltage. The experimental results for V/F control of 3Hp induction motor drives have been shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.537-545
• /
• 2006

As the T-DMB service is launched, some service requirements become necessary to send local programs such as advertisement and specific programs at the local broadcasting station while re-transmitting the broadcasting signal coming from the central or other station. In this paper, we propose a signalflow required for the effective splicing in the T-DMB system which usesboth MPEG-2 and MPEG-4 system specifications, and we illustrate the reconfiguring process into the ensemble stream that is widely used for the transmission of the T-DMB signal. Moreover, its performance is confirmed by comparing the images decoded at the recevier when the transport stream is swiched by using the splicer implemented through the proposed techniques.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.166-169
• /
• 2017

In this paper, maximum boost discrete PWM(DPWM) method of Z-Source Inverter(ZSI) is proposed. In general, a DPWM method is used to reduce the switching losses of the inverters and increase the efficiencies. The maximum boost PWM method of Z-Source Inverters is combined with the DPWM method. The proposed Maximum boost DPWM of ZSI is analyzed and it shows how to reduce the switching losses of ZSI. An experimental system has been built and tested to verify the effectiveness of the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.4
• /
• pp.179-187
• /
• 2001

In recent years, the switching source devices have the advantage of small, light and high reliability with the high-frequency. But, high-frequency switching has disclosed disadvantage of result from stress and turn-on and turn-off peak losses at the switching instant. Accordingly, in this paper propose ZVS-HB type high-frequency resonant DC/DC converter using soft switching technique (Zero-Voltage-Switching, Zero-Current-Switching) with safety operating of circuit at diving on inductive zone, through the circuit design example using the capacitor $C_3,\;C_4$ with soft switching function and division characteristic of resonant Capacitor C, $C_1,\;C_2$, and, the characteristic analysis of circuit is generally described using normalized parameters. Also, this paper certified a rightfulness of characteristic analysis in comparison with a theoretical values and a experimental values obtain from experiment using MOSFET.

• Electronics and Telecommunications Trends
• /
• v.13 no.6 s.54
• /
• pp.83-93
• /
• 1998

Best effort 서비스 품질만 지원하는 현재의 인터넷에 음성, 오디오 그리고 영상 통신 응용 서비스와 같은 새로운 멀티미디어 응용 서비스를 사용하려는 요구가 확대됨에 따라서 멀티미디어 서비스를 제공할 수 있는 인터넷의 필요성이 증대하고 있다. 또한 이러한 멀티미디어 서비스를 제공하기 위하여 서비스 품질(QoS)을 보장할 수 있는 통신 방식과 대량의 트래픽을 효과적으로 전달할 수 있는 메커니즘이 필요하게 되었다. 비동기 전송방식(ATM)은 이러한 멀티미디어 서비스를 인터넷에서 제공할 수 있는 최적의 통신 방식으로 고려되고 있는데, 이것은 ATM의 장점인 고속의 스위칭 기술과 논리적으로 VPI/VCI를 다중화 하는 기법, 그리고 유연한 서비스 품질 관리가 가능하기 때문이다. 본 고에서는 ATM 망에서 인터넷 서비스를 지원하기 위하여 결성된 ITU-T SG11의 Coordination 그룹인 Signalling Support of Internet-Based Applications(SoI) 회의 결과를 중심으로 하며 SoI의 표준화 연구 목표, B-ISDN 신호 프로토콜을 이용한 Long-lived 세션과 QoS에 민감한 세션의 인터넷 트래픽에 대한 ATM 연결 설정 절차 및 인터넷 세션 정보의 전달 방법 그리고 인터넷 서비스를 위한 멀티캐스팅 방법에 대하여 기술한다. 본 고의 목적은 인터넷 서비스 및 프로토콜을 지원하기 위하여 확장이 필요한 B-ISDN 신호 프로토콜의 기능을 명확히 기술하기 위한 것이다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.129-137
• /
• 2017

In this paper, we propose a digital controller design methodology for an LLC resonant converter which has been widely used due to the advantages of low switching loss and high efficiency. We establish a mathematical model of an LLC resonant converter using the extended describing function concept and propose a controller design method based on the Ziegler Nichols control parameter tuning criteria. The voltage controller of an LLC resonant converter is designed based on the derived small signal model and the performance of the controller is verified by MATLAB simulations. The validity and the control performance of the designed voltage controller for the LLC resonant converter is analyzed through some simulations for the case of load variations and circuit modeling errors.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.128-139
• /
• 1999

This paper proposes a linearization technique for the space vector modulation method, which increases the linear control range of inverter up to the 6-step inverter. This method is based on fourier series expansion of the desired output voltage of the inverter to calculate the compensation angle in continuous switching mode and holding angle in discontinuous switching including the 6-step mode respectively. The approximation equation of these angles are used for compensation of fundamental voltage in overmodulation range. Therefore, it is possible to obtain the linear control and the maximized utilization of PWM inverter output voltage.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.45-51
• /
• 2002

To achieve the lightweight and robust design of a structure, it is requested to design a structure and its control system simultaneously, which is called as the combined optimal design. A constant-cross-sectional area cantilever beam was chosen as an example for the applying the optimum design method. An initial load and a time varying disturbance were applied at the free end of the beam. Sliding mode control was selected due to its insensitiveness to the disturbance compared with other modes. It is known that the sliding mode control is robust to the disturbance and the uncertainty only if a matching condition is met, after giving a switching hyper plane. In this study, the optimum method was used for the design of the switching hyper plane and the objective function of the optimum switching hyper plane was assumed to be the objective one of the control system. The total weight of the structure was treated as a constraint and the cross sectional areas of the beam were considered as design variables, which means a nonlinear programming problem. The sequential linear programming method was applied to solve it. As a result of the optimum design, the effect of attenuating vibrations has been improved obviously. Moreover, lightweight design of the structure became possible from the relationship of the weight of the structure and the control objective function.