• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.403-410
• /
• 2005

This Paper Presents development of solar may shunt switching unit with a fully regulated Power regulation for Geostationary Earth Orbit(GEO) satellite. This shunt switching unit comprises the solar may shunt modules that regulate the solar array power. These solar array shunt modules connect/disconnect the solar array segments to/from the bus through switching actions. And that is also possible simply extension to an existing design by FPGA control logic changing. In order to verify the proposed design, the control logic and worst case analysis are analyzed and the simulation and experimental results we shown.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1755-1762
• /
• 2016

In this paper, a small areal dual-output SC(switched capacitor) DC-DC converter with a improved range of an input voltage is presented. The conventional SC DC-DC converter has an advantage of low cost and small chip area. But, it has a narrow input voltage range to convert efficiently. Also, it has a lager chip area and a lower power efficiency from multiple outputs. The proposed SC DC-DC converter improves the power efficiency by using the capacitor array structure which efficiently converts the voltage according to the input voltage. By sharing two switch array, it reduces the number of switches and capacitors from 32 to 25. The proposed SC DC-DC converter was manufactured in a $0.18{\mu}m$ CMOS process. In the simulation, the range of the input voltage is 0.7~ 1.8V, the max. power efficiency is 90%, and the chip area is $0.255mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1245-1251
• /
• 1999

A 1.25Gb/s path control switch chip has been designed and implemented with COMPASS tool and 0.8${\mu}{\textrm}{m}$ CMOS gate-array of LG semiconductor. This device controls the path of digital singnals in SDH-based transmission system. The proposed switch chip is suitable for self-healing operations both in a linear network and an unidirectonal ring, The self-healing operation of the switch is effectively done by the configuration information stored in the resisters of the switch. The test device adapted to SDH-based transmission system, show immediate restoration and a 10-11~10-12 bit error raito. And 2.5Gb/s or more high throughput can be realized by combining rwo identical or more switches with the parallel architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.9-17
• /
• 2020

Recently, RES (renewable energy source) projects have been spreading all over the world as an alternative to solve the shortage of energy and environmental problems caused by fossil fuel consumption. The Korean government also supported the policy and demonstration project to increase the proportion of renewable energy to 63.8[GW] until 2030, which is 20[%] of the total power generation. On the other hand, output loss of a PV array can occur when the surrounding high-rise buildings and trees shade a PV array. Therefore, this paper proposes an algorithm to improve the output loss of a PV array, which electrically changes a circuit configuration of PV modules by wiring and switching devices. Furthermore, this study modeled a PV system based on PSIM S/W, which was composed of a PV array, a circuit configuration device, and a grid-connected inverter. From the simulations results with the modeling and test device, the existing method showed no output when 50% of the shade occurs in PV modules. In contrast, the proposed method could produce the output because the voltage in the PV module could be restored to 246[V], and the operation efficiency of the PV system could be improved by the operation algorithm of the circuit configuration device.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.226-229
• /
• 2004

본 논문은 초고주파 영역에서 개방 단말 동축선을 대신해서 복소 유전율을 측정할 수 있는 MEMS 프로브와 그 응용예로 MEMS 프로브 어레이를 제안한다. MEMS 프로브는 기존의 동축선 프로브와 달리 커넥터와의 연결이 간단하여 일회용으로 프로브를 사용할 수 있다는 점에서 의료용으로 사용할 수 있는 가능성이 있다. 샘플의 유전율 분포를 구하기 위해서 기존의 센서는 반복 접촉을 요구하고 이로 인한 번거로움과 측정 오차를 줄일 목적으로 MEMS 프로브 어레이를 개발 하였다. MEMS 프로브 어레이는 RF 스위치를 사용하여 다수의 측정 포인트를 한번의 센서 접촉으로 측정할 수 있는 새로운 개념의 프로브이다. 1GHz부터 40GHz까지의 광대역에서 0.9% 식염수의 유전율을 측정하여 MEMS 프로브의 성능을 검증하였다.

• Electronics and Telecommunications Trends
• /
• v.15 no.2 s.62
• /
• pp.15-31
• /
• 2000

IP 패킷스위칭을 수행할 수 있는 WDM 기반의 대용량 광패킷스위칭 시스템을 위해 입력광 신호 속도 10Gb/s의 16 x 단위 스위치로 구성되는 출력 버퍼링 방식의 방송 및 선택형스위치 구조가 제안되었다. 기존의 광소자는 광특성 때문에 집적광 집적화 논리회로(PCL)의 제작이 쉽지 않았으나 최근 세계적으로 어레이형 집적화 광소자의 개발 추세가 급속도로 진전되고 있어 대용량의 광교환기 시스템 구조는 기존의 교환기 시스템과 유사한 형태 및 구조가 가능하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1354-1362
• /
• 2015

Heterogeneous network technology is expected to be a core technology for 5G mobile communications. 5G mobile network would be composed of many base stations even have mobility, then the operator should connect base stations through the wireless backhaul technology. This paper presents Ultra Wide Area Wireless Backhaul Network System with massive array antenna. We conducted link budget analysis for Ultra Wide Area Wireless Backhaul Network and performance analysis of massive array antenna system through the transmission simulator based on beamforming technology. In wide area ($10km^2$) wireless backhaul system composed of massive antenna, we achieved 5 bps/Hz average spectral efficiency with 1 W transmission power per beam.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.111-119
• /
• 2023

Internal storage state, weight data, and weight-centered calculation values for overhead bin can all be seen in this paper's real-time internal status identification system. The suggested system offers such valuable data via a range of sensors, including load cells and switch arrays. The proposed system could locate internal free space, locate the center of gravity, and give real-time visual information. It was developed utilizing an embedded system and the C programming language. These features led to the creation of smart overhead bins and real-time cargo loading monitoring technologies, both of which could one day aid in the creation of a cargo loading automation system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.66-71
• /
• 2014

This paper presents an analog front-end integrated circuit (IC) for medical ultrasound imaging systems using standard $0.18-{\mu}m$ CMOS process. The proposed front-end circuit includes the transmit part which consists of 15-V high-voltage pulser operating at 2.6 MHz, and the receive part which consists of switch and a low-power low-noise preamplifier. Depending on the operation mode, the output driver in the transmit pulser can be reconfigured as the switch in the receive path and thus the area of the overall front-end IC is reduced by over 70% in comparison to previous work. The designed single-channel front-end prototype consumes less than $0.045mm^2$ of core area and can be utilized as a key building block in highly-integrated multi-array ultrasound medical imaging systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.233-238
• /
• 2013

In this paper, a novel diversity and directivity mode-switchable planar antenna array is proposed. For the diversity mode, four elements are unfolded on the plane and high isolation can be achieved. On the other hand, the antenna function is changed to the directivity mode when they are folded and stacked. Each element works such as a stacked Yagi-Uda antenna with high directivity. Especially, the curved feed line as well as the hybrid feeding method is used to improve performances. The simulation results agree well with measurement results and it is successfully demonstrated that two modes are properly working at 2.4 GHz.