• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.127-130
• /
• 2004

In this paper, active shape control of composite structure actuated by shape memory alloy (SMA) wires is presented. Hybrid composite structure was established by attaching SMA actuators on the surfaces of graphite/epoxy composite beam using bolt-joint connectors. SMA actuators were activated by phase transformation, which induced by temperature rising over austenite finish temperatures. In this paper, electrical resistive heating was applied to the hybrid composite structures to activate the SMA actuators. For faster and more accurate shape or deflection control of the hybrid composite structure, PID feedback controller was designed from numerical simulations and experimentally applied to the SMA actuators.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.115-118
• /
• 2004

In this paper, a Fiber Bragg Grating (FBG) sensor system for smart structures is described. FBGs are well-suited for long term and extremely severe experiments, where traditional strain gauges fail. In the system, a reflect wave-length measurement method which employs a tunable light source to find out the center wave-length of FBG sensor is used. We applied the FBG system to composite repairing structures and beam column joint of building structure. We also applied the system to nuclear energy power plant for structural integrity test to measure the displacement of the structure under designed pressure and to check the elasticity of the structure by measuring the residual strain. The system works very well and it is expected that it can be used for a real-time strain, temperature and vibration detectors as parts of smart structures.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.130-135
• /
• 2021

Wrinkle patterns were fabricated on styrene-butadiene-styrene (SBS) block copolymer substrates using ion-beam (IB) irradiation with various intensities. The wavelength of the wrinkle pattern increased as the IB intensity was increased from 800 to 1,600 eV. IB irradiation-induced changes in the surface properties that were confirmed via physicochemical surface analyses. X-ray photoelectron spectroscopy analysis revealed chemical surface reformation due to the IB irradiation, resulting in C-O/C=O bonds after IB irradiation that were not reported before. These results indicate that the surface chemical modification caused by IB irradiation is strongly related to the surface modulus, which is important when fabricating wrinkle patterns. Furthermore, a strong IB irradiation induced a strong compressive strain; thus the size of the wrinkle pattern was increased.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.258-258
• /
• 2021

본 연구에서는 다양한 크기로 구성되어 있는 부유사의 연직방향 농도 분포와 흐름 특성을 동시에 모의할 수 있는 1차원 유사이동 모형을 제시하였다. 하상재료와 부유사의 입도분포를 고려하기 위해 유사입자의 크기범위를 여러 계급구간으로 분할하였으며, 각 계급구간에서 입경별 한계소류력은 Shields의 무차원 관계식을 바탕으로 산정하였다. 수치모형의 검증은 실험실 실험자료와의 비교를 통해 수행하였다. 수집한 실험실 실험자료에서는 연직방향으로의 유속분포와 농도의 분포, 부유사의 입도분포가 모두 제공된다. 수치모의 결과로부터 부유사 계산 과정에서 대표입경을 가정하여 적용하는 경우에 비해 여러 계급구간을 분할하는 경우 수치모의 결과의 정확도가 향상되는 것을 확인하였다. 이러한 모의 결과는 이전의 연구사례에서 확인된 바 있다. 또한 하상으로부터의 거리가 멀어질수록 부유사의 입도분포가 양으로 왜곡되는 현상 또한 계산결과에서 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제37권5호
• /
• pp.494-499
• /
• 2024

The possibility of a dye-sensitized solar cell (DSSC) submodule was evaluated as an independent power source that can drive a smart liquid crystal window (SLW) that selectively blocks sunlight when electricity is applied. In order to save energy and increase the functionality of buildings, SLW operation was supplied directly from DSSC submodule, rather than connecting to the existing power system and external power sources. It was confirmed that the SLW can control light transmittance through self-generation using the DSSC submodule composed of 6 cells at low light of 2,500 lux. These results imply that there is a high possibility of combining smart windows and DSSCs suitable for window-type building-integrated photovoltaic (BIPV) systems. DSSCs, which can self-generate power in low light, are expected to increase their usability in urban BIPV systems through combination with smart window technology.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.439-448
• /
• 1996

광투과성 BK10 glass fiber/PMMA 복합재료의 합성조건을 변화시켜 복합재료가 온도와 파장을 감지하는 센서로서의 응용 가능성이 있는지를 연구하였다. 유리섬유 제조시 뽑아내는 속도와 온도등의 공정조건에 따른 유리섬유의 직경 및 굴저율을 측정하였고 유리섬유에 코팅되는 coupling agent의 용매 및 코팅방법에 대하여 연구하였다. 복합재료의 최대광투과도를 나타내는 온도($T_{max%}$)는 복합재료에 강화되는 유리섬유의 크기(굴정율), 유리섬유 vol%, PMMA의 분자량등을 변화시키면 $13~50^{\circ}C$ 범위에서 조정될 수 있었으며, 측정파장을 변화시킬 경우 $T_{max%}$ 값이 $35~55^{\circ}C$ 범위가 되도록 합성하는 것이 가능하였다. 한편 복합재료를 파장의 함수로서 광투과도를 측정하였을 때 최대광투과도가 나타나는 파장($\lamda_{max%}$)은 나타나지 않았다.

• Composites Research
• /
• 제19권3호
• /
• pp.43-49
• /
• 2006

In this paper, a long gauge Fiber Bragg Grating (FBG) sensor system is described and long gauge FBGs are well-suited for measuring the upper parts of the bridge piers under the extremely severe movement conditions. In the experiments, we used more than 30m long FBG sensors to measure the movement of top part of the bridge piers which are separated from the main bridge by cutting the decks. With the actuator, the deck and girders were pushed and released. We checked the movement of the top of the pier while releasing the pressure of the actuator with the long gauge fiber sensor. In order to measure the movement of the upper part of the pier, the reference point must be outside of the pier. Using the optical fiber sensors, one end of the sensor is attached to the top of the pier and the other end is attached to the bottom of the next pier. The fiber sensors showed good response to the release loading and we could calculate the movement of the top part of the pear.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.231-236
• /
• 2019

Ni hydroxides ($Ni(OH)_2$) are synthesized on Ni foam by varying the hexamethylenetetramine (HMT) concentration using an electrodeposition process for pseudocapacitor (PC) applications. In addition, the effects of HMT concentration on the $Ni(OH)_2$ structure and the electrochemical properties of the PCs are investigated. HMT is the source of amine-based $OH^-$ in the solution; thus, the growth rate and morphological structure of $Ni(OH)_2$ are influenced by HMT concentration. When $Ni(OH)_2$ is electrodeposited at a constant voltage mode of -0.85 V vs. Ag/AgCl, the cathodic current and the number of nucleations are significantly reduced with increasing concentration of HMT from 0 to 10 mM. Therefore, $Ni(OH)_2$ is sparsely formed on the Ni foam with increasing HMT concentration, showing a layered double-hydroxide structure. However, loosely packed $Ni(OH)_2$ grains that are spread on Ni foam maintain a much greater surface area for reaction and result in the effective utilization of the electrode material due to the steric hindrance effect. It is suggested that the $Ni(OH)_2$ electrodes with HMT concentration of 7.5 mM have the maximum specific capacitance (1023 F/g), which is attributed to the facile electrolyte penetration and fast proton exchange via optimized surface areas.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.159-165
• /
• 2022

Rare earth elements, which are important components of motors, are in high demand and thus constantly get more expensive. This tendency is driven by the growth of the electric vehicle market, as well as environmental issues associated with rare-earth metal manufacturing. TC 298 of the ISO manages standardization in the areas of rare-earth recycling, measurement, and sustainability. Korea, a resource-poor country, is working on international standardization projects that focus on recycling and encouraging the domestic adoption of international standards. ITU-T has previously issued recommendations regarding the recycling of rare-earth metals from e-waste. ISO TC 298 expands on the previous recommendations and standards for promoting the recycling industry. Recycling-related rare earth standards and drafts covered by ISO TC 298, as well as Korea's strategies, are reviewed and discussed in this article.

• 한국주조공학회지
• /
• 제43권4호
• /
• pp.194-200
• /
• 2023

주조공정에서 주형의 열전달은 주형을 균일한 등방성 재료로 간주하여 계산해 왔지만 실제로 주형은 균일한 등방성 재료가 아니어서 유사한 근사값으로 계산을 행하였으며, 특히 다짐성, 바인더 첨가량등을 고려할 시에는 추정치를 사용하고 있었다. 본 연구에서는 사형 주형의 입자 구조의 관계의 열물성치를 계산하는 연구를 진행하고, 열물성치를 계산할 수 있는 기술을 개발하였다. 입자가 균일한 경우에서 열저항 모델에 근거한 열전도도 및 비열을 계산하는 알고리즘을 개발하고, 이를 모래 크기분포가 있는 사형 주형에 적용하였다. 모래는 인공사를 대상으로 하여 열물성치를 계산하였으며, 실험치와 비교하여 비교적 근사한 값을 얻을 수 있었다.