• Korean Journal of Environment and Ecology
• /
• v.24 no.2
• /
• pp.101-107
• /
• 2010

This study was carried out to provide basic data for efficient park management by analysing visitors' satisfaction factors and estimated regression model through questionnaire survey method at Taeanhaean National Park in Korea. Performance(satisfaction) variables as 'touting', 'illegal merchant', 'noise', 'indiscreet use' and 'collection of natural plants or animals', and Importance variables as 'littering problem', 'water pollution act', 'careless cooking' and 'exorbitant pay' were relatively high score. It was clarified that the 'souvenir & special product', 'lack of use program' 'lack of public facility', 'lack of information facility', and 'lack of commercial facility' were 'concentrate here' ones by the Importance-Performance analysis. 'Facility management', 'Use management' and 'Resource management' factors were found out by Factor Analysis and the 'Facility management' was the biggest factor accounting for 32.6% of all. In the estimated model by Multiple Regression Analysis, 'lack of employee's guidance or kindness', 'lack of convenience facility', 'noise', 'lack of facilities to stay' and 'charge of user fee, parking fee' were the variables to impact visitors' satisfaction and to need concentrated management. These results were unique characteristics of marine national park and then the different management strategy and policy from mountain national park were necessary.

• Clean Technology
• /
• v.10 no.2
• /
• pp.61-72
• /
• 2004

In this study, aqueous/semi-aqueous cleaning agents which consist of organic solvent, surfactant, cosurfactant, and water were developed by changing formulation parameters such as organic solvent type and contents, surfactant type and contents, and cosurfactant/surfactant(A/S) ratio, etc.. And physical properties and flux removal of the formulated cleaning agents have been evaluated. Also, the performance of oil-water separation from the rinse water contaminated during the cleaning process was evaluated for its recycling. The formulated cleaning agents in this work expected to have good penetration because of their low viscosity and low surface tension values of 30.2~32.5 dyne/cm. The flux removal with the terpene type cleaning agent was higher than that with hydrocarbon type cleaning agent and two commercial products (CPA(commercial product A), CPB(commercial product B)). And the performance of oil-water separation by gravity settling from the rinse water contaminated with formulated cleaning agent and soils was shown to be very good. The cleaning agents developed in this work were applied to surface mounting technology(SMT) cleaning process for manufacturing electronic parts at L electronic company. As a result, the newly developed cleaning agents showed two times better cleaning speed for removal of solder cream than the conventional ond containing ethanol and IPA(isopropyl alcohol). In addition, malodor and VOC problems generated by the previous organic cleaning agents have been solved in the manufacturing field through introduction of the non-volatile and environmental-friendly cleaning agents to the field.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1187-1198
• /
• 2008

Many reservoirs in Korea and their downstream environments are under increased pressure for water utilization and ecosystem management from longer discharge of turbid flood runoff compared to a natural river system. Turbidity($C_T$) is an indirect measurement of water 'cloudiness' and has been widely used as an important indicator of water quality and environmental "health". However, $C_T$ modeling studies have been rare due to lack of experimental data that are necessary for model validation. The objective of this study is to validate a coupled three-dimensional(3D) hydrodynamic and particle dynamics model (ELCOM-CAEDYM) for the simulation of turbid density flows in stratified Daecheong Reservoir using extensive field data. Three different groups of suspended solids (SS) classified by the particle size were used as model state variables, and their site-specific SS-$C_T$ relationships were used for the conversion between field measurements ($C_T$) and state variables (SS). The simulation results were validated by comparing vertical profiles of temperature and turbidity measured at monitoring stations of Haenam(R3) and Dam(R4) in 2004. The model showed good performance in reproducing the reservoir thermal structure and propagation of stream density flow, and the magnitude and distribution of turbidity in the reservoir were consistent with the field data. The 3D model and turbidity modeling framework suggested in this study can be used as a supportive tool for the best management of turbidity flow in other reservoirs that have similar turbidity problems.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.679-688
• /
• 2000

Dispersants, which are used to break water-in-oil emulsions and to remediate oil-spills, are another water pollutants. In this study, magnetic separation technology was applied to remove dispersants from the sea. Magnetite and maghemite were used as magnetic sorbents and SDDBS, an anionic surfactant and Triton X-100, a nonionic surfactant, were employed as dispersants. Batch experiments were undertaken to study the sorption capacity and sorption equilibrium, and water-bath experiments were conducted to simulate the real situation and to describe the recovery of magnetic particles by the permanent magnet or electromagnet. Maghemite has rather constant removal efficiency for dispersants, regardless of surfactant species. On the other hand, removal efficiency by magnetite is higher for anionic surfactant than maghemite and is higher in distilled water than in seawater which contains more ions. The sorption of dispersants to magnetite is explained by electrostatic attraction and that of maghemite is described not only by electrostatic attraction, but also by structural characteristics that provide high sorption ability and surface condition. Water bath experimental results showed that recovery efficiency of magnetic particle after sorption for dispersants is nearly 100%. It is suggested that this magnetic separation technology is an effective way of dispersant removal because of short operating time, high sorption capacity, and high recovery efficiency of sorbents.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.7
• /
• pp.504-515
• /
• 2012

Groundwater is widely used as drinking water supplies around the world. However, microbial contamination of groundwater is a serious environmental problem that degrades drinking water quality and poses a great threat to human health. Among the pathogenic microorganisms such as viruses, bacteria, and protozoa, viruses are not readily removed during transport through soils, having high mobility in groundwater environment due to their smaller size compared to bacteria and protozoa. Studies regarding the fate and transport of viruses in soils and aquifers are necessary to determine the vulnerability of groundwater to microbial contamination and to secure safe drinking water sources. Also, these studies provide important information to establish the regulations and policies related to public health. This review paper presented the field and laboratory studies conducted for the fate and transport of viruses in subsurface environments. Also, the paper provided the factors affecting the fate and transport of viruses, the characteristics of bacteriophages used for virus studies, and virus transport model/colloid filtration theory. Based on this review work, future researches should be performed actively to set up the viral protection zone for the protection of groundwater from viral contamination sources. Especially, the researches should be focused on the development of mathematical models to calculate the setback distance and travel time for the viral protection zone along with the accumulation of information related to the model parameters.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1412-1419
• /
• 2006

Concentrations of formaldehyde and acetaldehy de were respectively analysed in forty-five alcoholic beverages obtained from the market. After derivatization with PFBHA, GC-ECD and GC-MSD were employed for analysis. The peak area of aldehyde oximes (derivatives with PFBHA) increased with the increasing ethanol content (5%, 10%, 15%, 20% and 40%). When three-point calibration corves for the selected ethanol concentration (5, 13, 21 and 40%, v/v) were studied, suitable linearity against ethanol concentration was observed only under 5, 13, and 21% (ethanol, v/v). After analysis, maximum content of formaldehyde (average of 0.272 ppm) and acetaldehyde (average of 15.262 ppm) among the observed 45 alcoholic beverages was found from whisk (2 species) while minimum content of formaldehyde (average of 0.009 ppm) and acetaldehyde (average of 0.805 ppm) was found from diluted soju (4 species).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.1
• /
• pp.51-55
• /
• 2008

Although phthalates aren't used as an cosmetic ingredient, some cosmetics especially nail lacquer, hair spray, and perfume still have phthalates. This is mainly caused by contamination and carryover during manufacturing process, so analysis of phthalates in those cosmetics has became a very important thing for quality-assurance(Q.A). The main phthalates under debate are diethyl phthalate(DEP), dibutyl phthalate(DBP), and bis(2-ethylhexyl) phthalate (DEHP) in domestic market. Gas chromatography-mass spectrometry(GC-MS) coupled with solvent extraction and concentration has been used for ppm level and sub ppm level analysis of phthalates. It requires much time and cost to use mass spectrometric detector and to prepare the test solution. Moreover analysis of phthalates at low concentrations is difficult because of contamination which results in wrong analytical results. In the present study, we showed a simple method using gas chromatography-flame ionization detector(GC-FID) which has fast analysis time, minimum use of solvent, reduced sample preparation steps for minimizing contamination and quantitative range of $2{\sim}50{\mu}g/g(ppm)$ in products. Consequently, this method will be proper for Q.A analysis in related companies.

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.428-435
• /
• 2015

Constructed wetlands (CWs) have been accepted as an attractive and economic alternative to a variety of pollution control and provided potentially valuable wildlife habitat in urban and suburban areas, as well as esthetic value within the local natural environment. CWs are known eco-friendly technology to solve the problem of the climate change and urbanization issues. Numerous studies have been published on the various aspects of a CW. However, there are current limitations about the CW operations such as few design guidelines, poor performance results regarding the simple construction. Therefore, the objective of this research was to suggest an appropriate design and maintenance guidelines for a CW by thorough investigation of site monitoring results. The research also concentrated in redefining and reclassifying CWs, based on literatures made by the Ministry of Environment (MOE) and other organizations. Investigation at 43 CWs in Korea was performed by using collected data and by performing site survey from 2013 to 2014. Based on the results, the best practices among the investigated CWs provided water treatment, wildlife habitat, environmental education, and leisure. Also these CWs conducted a regular maintenance such as vegetation, sediment dredging and cleaning of facilities. Results obtained are intended for use by academics and any organizations involved in CW management.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.334-343
• /
• 2019

A lab-scale vertical flow subsurface (VFS) wetland composed of three parallel columns with polypropylene synthetic fiber as main substrate was operated. Piggery stormwater diluted from swine excreta was fed to the wetland on the basis of three different hydraulic regimes or hydraulic retention time (HRT) of 2, 4, and 8 days with daily internal recirculation. Then, monitoring of common water quality parameters was carried out. Unexpectedly, an increase of effluent COD concentration accompanying the appearance of foams was observed during a distinct period in the wetland with HRT 2, 4, and 8 days, successively. Subsequently, a series of experiments was conducted to investigate the origin of the foams. Foams and the increase of COD concentration were found to be induced by the release of organic matter from the synthetic polypropylene fiber which was fed with piggery stormwater. Meanwhile, nitrogen removal was found to be enhanced during a period which overlapped the distinct foaming period signifying that foaming played two important functions in biological nitrogen removal. Foams which form rapidly and then burst easily could hold up and then release oxygen for nitrification. Foams which contain organic surfactants could serve as carbon sources for denitrification as well. Hence, nitrogen removal was enhanced during the foaming stage. After that, COD concentration decreased slowly to a level prior to the foaming stage, and nitrogen removal efficiency declined as well.

• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1073-1077
• /
• 2010

Fungi, including allergenic, pathogenic or toxigenic species, may have direct effects on human health, interfere with the disinfection process and maintenance of chlorine residual, and add to taste and odor problems. We surveyed distribution of waterborne fungi from raw water in Busan metropolitan city using the EPA standard method. According to the survey, conducted from March 2008 to October 2008, the number of fungi in raw water was high in September and low in April. Quantitative enumeration of fungi per 100 ml of raw water ranged from 5 to 64 CFU, and a higher number was detected in the Mulgum region compared to the Maeri region. Total fungi numbers highly correlated with pH, water temperature and total coliform in this area. Predominant fungi genera grown in medium were identified as Aspergillus, Penicillum, Histoplasma, Rhizopus, Trichophyton, Mucor and Sporthrix species. Aspergillus flavus and Penicillum notatum were particularly dominant in both areas. There were a total of 6 and 9 species detected in the Mulgum and Maeri regions respectively, and the number of species was more verified in the Maeri region than the Mulgum region.