• Journal of Energy Engineering
• /
• v.15 no.2 s.46
• /
• pp.83-95
• /
• 2006

This study is to establish a national vision of the hydrogen economy and design a roadmap to materialize it. A goal is set to supply 15% of final energy consumption with hydrogen energy in Korea by 2040. Selecting the transportation sorter as the main target, more than 50% of vehicles on the road will be replaced with fuel cell vehicles (FCVs) while $20{\sim}30%$ of electricity demand in the residential and commercial sectors might be replaced with power generation by fuel cells. If this goals were attained as planned, primary energy demand would be reduced by 9%, resulting in improved energy mix in which fossil fuel consumption is greatly reduced whereas renewable energy increases by 47%. Furthermore, GHG emissions will be reduced by 20% and self-sufficiency in energy is enhanced up to 23%. If the hydrogen economy is to materialize, the government needs to implement institutional arrangements such as new legislations, organizations, and fiscal measures to facilitate the process. In addition, the private sector's participation is highly recommended to mobilize fund needed for the huge investment to build an infrastructure in preparation for the hydrogen economy. Arrangements for codes and standards are also required to promote industrialization of fuel cells and hydrogen production and consumption.

• Journal of Distribution Science
• /
• v.6 no.1
• /
• pp.47-62
• /
• 2008

Joining the WTO in 2001, China became a number of the global economic system. China succeeded in vying to host Beijing 2008 Olympic Games and World Expo 2010 Shanghai. It is China's honor and opportunity to have high economic growth in the coming future. In 2007, the total cost of public logistics decreased by 18.2% than 2006 to 4540.6 billion RMB, accounting for 18.4% of the GDP. So, China logistics is a huge industry and a growing market full of charm. The statistic ratios of China's logistics and growth trends show us it is an important issue to build and run an effective logistics system. However, research on China's logistics systems and supply chain is lacked. This study is focus on the logistic location strategy in China including the study of factories and warehouses geographic strategy concerned with SCM. The core of this study is to propose a New Multi-Facilities Location Decision Model. This study banded the revised gravity center, the standard single facility location decision model(Gravity Center Model) and the transportation model into a new Multi-Facilities Location Decision Model. In addition, this study suggested the gravity center of population, the gravity center of each industry, the location decision graded-list of each industry of china using the gravity center model and the revised gravity center model. The new Multi-Facilities Location Decision Model proposed in this study can be used to solve the location decision problem of more than two facilities. And it can be used in the fields such as the location decision of production facility and service facility, the location of distribution and logistics, the location of broadcast and satellite communications, the location of wireless communication tower and so on.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.977-982
• /
• 2008

The production of ethanol by microbial fermentation as an alternative energy source has been of interest because of increasing oil price. Saccharomyces cerevisiae and Zymomonas mobilis are two of the most widely used ethanol producers. In this study, characteristics of ethanol fermentation by Saccharomyces cerevisiae CHY1077 and Zymomonas mobilis CHZ2501 was compared. Brown rice, naked barley, and cassava were selected as representatives of the starch-based raw materials commercially available for ethanol production. The volumetric ethanol productivities by Saccharomyces cerevisiae from brown rice, naked barley and cassava were $0.68g/l{\cdot}h$, $1.03g/l{\cdot}h$ and $1.28g/l{\cdot}h$ respectively. But for the Zymomonas mobilis, $2.19g/l{\cdot}h$(brown rice), $2.60g/l{\cdot}h$(naked barley) and $3.12g/l{\cdot}h$(cassava) were obtained. Zymomonas mobilis was more efficient strain for ethanol production than S. cerevisiae.

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.13-35
• /
• 2011

The advancement of the information technology provides a wide range of corporate to cope with new business environments that are different in size, life and operation conditions. The Research methodology used in this study is Technology Acceptance Model. The Study Method are mainly survey and questionnaire. The major result of article can be summarized. Its are as the follows: This paper ware investigated the determinants of 'port service quality', 'perceived usefulness', 'perceived ease of use', 'utilization intention', 'practice use'. There are 400 sended samples and 150 returns, 173 of them are analyzed on a port utilization using TAM model. 1. The Port service quality are found to have a positive effect to 'perceived usefulness', 'perceived ease of use', 'utilization intention' 2. The perceived ease of use are found to have a positive effect to 'perceived usefulness', 'utilization intention' 3. The perceived usefulness is found to be positively related to 'utilization intention' 4. The utilization intention is found to have a positive effect to ''practice use' we hove to provide useful contribution to increase the Korea ports' competitiveness in introduction of port information system. In addition, in order to port development offer some insight in further research.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.262-269
• /
• 2016

Subway station scales are determined by peak predictions. In this study, the purpose behind the installation of a subway is public transportation convenience and public interest, but economic validity is also important. By proving that the scale of the station is excessive with regard to the target station size for Seoul subway Line 5-8, a reasonable plan. can be sought. According to station installation standards, the area of the station under investigation here is out of the service levels by six stages (A~F), and it must be four or more levels (D). The Actual level for the B level is a two-step design. The Actual ratio for over- Peak predictions is only 17.8% on average. The results of measurements of the excess area and determination of the excessive costs were analyzed by subdividing the area and by calculating it based on the B level, finding that it is possible to provide benefits for customers only in the current design, with an area ratio of 16.3%. Given the weight, it was estimated that current conditions can meet the needs of only 18.6% of the current area. Simplifying the scale calculation method of the station, it is convenient, safe, and advantageous to move citizens only if the scale can be streamlined. Then, with a reduced initial investment, maintenance costs during the operation can be reduced.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.478-485
• /
• 2018

Aids to Navigation (AtoN) is one of the marine traffic safety facilities that promotes the safety of maritime traffic and enhance ship's operational efficiency. However, functional failure of AtoN due to ship's collision or bad weather conditions leads to inconvenience or navigational risk to various users such as the ship operators. For insstance, the largest container port in Korea, Busan Port has experienced a total of 400 AtoN accidents in the past 12 years (2006-2017).Therefore, an average of 20.6 days of recovery time is required, which increases the maritime safety anxiety for AtoN users. is the objective of this study was to present the quantitative support of the users for the prevention of AtoN accidents and the improvement of the feasibility of implementing more efficient management in Korea. A survey was conducted on the users of Busan port areas to investigate general perception of AtoN in general and the accidents that have happened, and to estimate the economic value of navigational risk reduction by implementing effective AtoN management measure. Using the representative non-market valuation method for environmental or public goods known as contingent valuation method (CVM), the economic value granted to users for the AtoN services in Busan port was estimated to at least 16 billion won. Therefore, these finding could be used by AtoN managers and/or policy makers as a valuable data to identify the users' need of various AtoN services including Busan Port and to establish and implement more efficient management plan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.47-55
• /
• 2019

The army of republic of korea have been continued to transform their logistics support system structure for better efficient logistics support system in preparation for the future environment. Logistics system has supply network structure which is connected by various units and supply network structure received attention as a factor of success of supply network. Many researchers have continuously researched inventory management, transportation or economy factors for supply network, but such a study on the one in military supply network structure analysis is still slower than the study of analysis of other factors until now. In this study, we identify military supply network structure influence factor by application of social network analysis method which is used broadly and analyze co-relationships between supply network structure influence factor and valued APL(average path length) as a criteria of efficiency of military supply network. By this study it has value of military supply network influence factor identification for the better military supply network fabrication.

• MARITIME LAW REVIEW
• /
• v.29 no.2
• /
• pp.115-144
• /
• 2017

The impact of the global financial crisis, which began in the United States in 2007, had a major impact on the domestic shipping and shipbuilding industries. In this regard, the domestic shipyard has established an order-taking strategy in several ways as an alternative to lowering the amount of construction of commercial vessels due to deterioration of the shipping industry, and selected industrial sector was the offshore plant sector. However, the domestic shipyard has under performed the offshore plant in order to just increase sales and secure work without any risk analysis for EPC contracts. As a result, the shipyard has been charged more than the initial contract price with the offshore plant contractor, or the shipyard has become a legal issue requiring payment of liquidated damages due to delays in delivery of the product. The main legal disputes are caused by the thorough risk analysis and the inexperience of process control that can occur during offshore plant construction. and In particular, there is no sufficient review of the unequivocal provisions in the contract as an element of risk management. There is no human resource to review these contractual clauses. Therefore, this study identifies the existence of specific risks that could lead to delays in offshore plant construction, and examined the existence of any unequivocal clauses in contracts for offshore plant construction. and also discussed how the toxic clause applies to the actual parties and how the concrete risk factors in the construction contracts are transferred and expressed by referring to the interviews with the project manager of the domestic shipyard and the previous research. As a result, This paper examined the legal liability of the contracting parties regarding delayed delivery of the products due to the offshore plant construction contract. And to improve the domestic shipbuilding industry.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.250-251
• /
• 2023

The pallet, typically a form of tertiary packaging, is a flat structure used as a base for the unitization of goods in the supply chain. In addition, standard pallets such as T-11 and T-12 are used throughout the logistics industry to reduce the cost and enhance the efficiency of transportation. However, in the case of special cargo, it is impossible to handle such cargo using a standard pallet due to its size and weight, so many have developed and are now using their customized pallet. Therefore, this study suggests a pallet size optimization method to calculate the optimal pallet size, which minimizes the loss of space on a pallet. The main input features are the specifications and the storage quantity of each cargo, and the optimization method that has modified the Neighborhood Search Algorithm calculates the optimal pallet size. In order to verify the optimality of the developed algorithm, a comparative analysis has been conducted through simulation.

• Asia Marketing Journal
• /
• v.8 no.1
• /
• pp.105-132
• /
• 2006

The major purpose of this study is to investigate the impact of environmental uncertainties and logistics resources capabilities mediated by relational norms and logistics services on logistics performance in the industrial products. The 272 data were collected from the key informants who were working at the logistics-related departments in the H Heavy Industries & Construction and HSD Engine. The following results were verified using structural equation modeling. First, environmental uncertainties such as dynamism and heterogeneity unexpectedly had insignificant effects on relational norms such as information exchange and flexibility and logistics services such as product availability and on-time delivery. Second, logistics resource capabilities showed unique effects based upon its component's characteristics. For example, Logistics Information Systems did not have direct impact on logistics services but had indirect effect on logistics services via relational norms. On the other hand, logistics resources such as logistics specific assets and transportation service competencies had direct impact on logistics services but not on relational norms. Third, relational norms between transaction partners significantly affected logistics services but had insignificant effects on logistics performance such as logistics costs reduction and delivery qualities. Fourth, consistent with several studies, excellent logistics services between industrial purchaser and suppliers based upon relational norms did have significant effect on logistics performance such as delivery consistency and delivery qualities. Finally, the empirical results in this study could be strategic logistics management guidelines based upon the theoretical relationships among the environmental uncertainties, logistics information systems, logistics resources, relational norms, logistics services, and logistics performance.