• Journal of Welding and Joining
• /
• v.22 no.3
• /
• pp.9-13
• /
• 2004

지하로부터 채굴되는 천연가스의 황화수소가스 농도가 일정 수준 이상이면 이를 사우어가스(sour gas)분위기라고 하는데, 이러한 분위기에 강재가 노출되면 수소유기균열(hydrogen induced cracking, 이하 'HIC균열'이라고 함)이 발생할 위험성이 높아진다.(중략)

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.602-603
• /
• 2004

전력용 변압기에 아크나 코로나가 발생하여 국부가열이 존재하면 절연유나 절연지가 분해하여 저분자의 탄화수소, 수소, 탄화가스, 일산화탄소 둥이 발생하여 절연유에 용해된다. 절연유에 용해된 가스를 실시간 분석하여 변압기의 이상을 조기에 발견하여 운전의 효율성을 높이고 고장을 사전에 예방하기 위한 기술이 전개되고 있다. 경제적인 측면에서 단일 수소가스 검출센서가 널리 보급되어 실용화되고 있는 실증이다. 이 논문에서는 전력용 변압기의 국부적 고온인 경우의 가열온도, 가열시간 및 방전에 대하여 수소가스 주도형 센서의 응답특성에 관하여 고찰하였다.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.48-56
• /
• 2023

Currently, Hydrogen compressor is maintained and managed according to the safety management regulations of the operator. But it is not based on technical standards, so it is necessary to establish based on reliability. In this paper, hydrogen compressor taxonomy by ISO 14224 standard reviewed for hydrogen compressor operated by KOGAS-Tech hydrogen vehicle refueling station to establish 9-stage taxonomy, and FMEA was conducted to establish RCM strategy specified in SAE JA1011, and 1012. It is expected that results of taxonomy and RCM strategy will be used as basic data for development of standards for verifying the performance of compressors.

• Journal of the Korean Institute of Gas
• /
• v.13 no.3
• /
• pp.28-32
• /
• 2009

There are two hydrogen supply systems which are central and distributed supply. Central supply system may be cost-effective but huge supply infra cost is needed. For cost-effectiveness, hydrogen supply with existing natural gas pipeline has been focused in Europe. From the analysis results in this study, hydrogen supply method with existing natural gas pipeline is the better for environmental availability including green house effect.

• Explosives and Blasting
• /
• v.21 no.1
• /
• pp.85-94
• /
• 2003

발파후에 2차연소 또는 폭발(이하, 2차연소라 한다. )이 일어났다는 사실은 폭약이 폭발후에 어떤 가연성가스가 발생하고 그 가연성가스가 잔존하는 폭발열 또는 기타의 점화원에 의해 연소되었음을 의미한다. 폭약이 폭발하였을 때, 발생 가능한 가연성물질은 유리탄소, 일산화탄소, 수소 등으로 추정할 수 있는데 실험결과에서는 가연성물질의 주성분이 수소인 것으로 나타났다. 본 연구에서는 에멀존계 함수폭약이 산소평형, 알루미늄함량, 알루미늄형태와 크기 그리고 포장지의 두께에 따라 수소가 발생되는 양을 가스크로마토그라피를 이용하여 측정하였다. 상기의 열거한 요인들은 모두 수소발생량과 관계가 있는데, 이중에서도 가장 중요한 요인은 산소평형과 알루미늄의 함량인 것으로 나타났다. 한 예로 알루미늄이 15%가 포함되고 산소평형이 -10인 에멀존계 함수폭약은 폭발후에 19.4%의 수소를 함유하고 있는 후가스를 발생시켰으며 이 가스를 포집하여 공기중에 방출시키면서 성냥불을 가까이 하였더니 연소가 되었다. 따라서 에너지를 높이기 위하여 알루미늄의 함량을 높이고 산소평형을 지나치게 마이너스로 설계한다면, 2차연소는 언제든지 발생할 가능성이 있다고 판단된다. 알루미늄의 함량을 가능한 적게, 산소평형을 가능한 0에 가깝게 설계해야 만이 2차연소 현상을 방지할 수 있을 것이며 ㄸ한 최적의 설계뿐만이 아니라 정확한 제조와 품질검사도 2차연소 현상을 방지하는데 중요한 몫을 할 것으로 판단된다.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.43-48
• /
• 2021

This study was conducted using FLACS, a specialized gas accident analysis program. Hydrogen refueling stations subject of safety analysis, consist of compression facilities, storage tanks, and hydrogen piping. The safety analysis of potential risk factors was conducted after reflecting the design specifications of major facilities and components, environmental conditions around hydrogen refueling stations, etc. As of 2021, about 70 refueling stations in Korea are available, and 1,200 are scheduled to be introduced in the next 2040. To prepare for possible accidents caused by potential hazards for the safe distribution of hydrogen refueling stations, we intend to derive hydrogen leakage diffusion scenarios and review their safety.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.74-79
• /
• 2021

This study analyzed the current status of the global hydrogen economy and the safety of energy sources currently in use due to the activation of the hydrogen economy. Understanding the hydrogen economy, identifying government policy trends, comparing and analyzing characteristics with existing energy sources such as gasoline, propane, and methane, and evaluating damage impact for each energy source using PHAST, a quantitative damage impact assessment program. Using the analysis results, this study analyzes the safety of hydrogen energy to revitalize the hydrogen economy and suggests ways to improve safety.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.13-29
• /
• 2016

In this study, we analyzed the causes of major faults in the biogas plant through the case of gas engine failure when cogenerating electricity and heat using biogas as a fuel in the actual sewage treatment plant and suggested countermeasures. Hydrogen sulfide in the biogas entering the biogas engine and water caused by intermittent malfunction of the water removal system caused intercooler corrosion in the biogas engine. In addition, the siloxane in the biogas forms a silicate compound with silicon dioxide, which causes scratches and wear of the piston surface and the inner wall of the cylinder liner. The substances attached to the combustion chamber and the exhaust system were analyzed to be combined with hydrogen sulfide and other impurities. It is believed that hydrogen sulfide was supplied to the desulfurization plant for a long period of time because of the high content of hydrogen sulfide (more than 50ppm) in the biogas and the hydrogen sulfide was introduced into the engine due to the decrease of the removal efficiency due to the breakthrough point of the activated carbon in the desulfurization plant. In addition, the hydrogen sulfide degrades the function of the activated carbon for siloxane removal of the adsorption column, which is considered to be caused by the introduction of unremoved siloxane waste into the engine, resulting in various types of engine failure. Therefore, hydrogen sulfide, siloxane, and water can be regarded as the main causes of the failure of the biogas engine. Among them, hydrogen sulfide reacts with other materials causing failure and can be regarded as a substance having a great influence on the pretreatment process. As a result, optimization of $H_2S$ removal method seems to be an essential measure for stable operation of the biogas engine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1377-1382
• /
• 2011

Recently, alternative and novel energy resources have been developed for use in the future because of the current environmental problems and exhaustion of fossil energy resources. Hydrogen energy has many merits, such as its environmental friendliness, easy storage, and easy production, but it also has disadvantages, in that it is highly combustible and explosive. In this study, a test procedure using a simple SP test under highly pressurized hydrogen gas conditions was established. In order to evaluate its applicability, SP tests were carried out using a stainless steel (SUS316L) sample under atmospheric, pressurized helium, and pressurized hydrogen gas conditions. The results under the pressurized hydrogen gas condition showed fissuring and produced a reduction of the elongation in the plastic instability region due to hydrogen embrittlement, showing the effectiveness of the current in-situ SP test.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.53-65
• /
• 2021

While the hydrogen refueling station is rapidly expanded and installed, the safety inspection of the hydrogen pressure vessel in the station should be very important. Of these, according to ASME, hydrogen embrittlement tests must be performed for hydrogen vessel that store hydrogen above a certain pressure. The main test method for hydrogen embrittlement inspection is to carry out fracture tests and fatigue fracture tests in a high pressure hydrogen atmosphere, which allows the durability limit of the pressure vessel to be measured and the endurable limit to be determined in the hydrogen atmosphere. In detail, the critical crack depth can be calculated by the stress intensity factor(K), and the service life can be determined by da/dN (fatigue growth rate). API579-1/ ASME FFS-1 part 9 exemplifies the calculation method according to the mode of crack-like flaws, but for various shapes such as plates and cylinders, there are about 55 modes according to the shape and location of the crack. Due to the fairly complex formula, it is not easily accessible. In this study, we will show you how to calculate fracture mechanics numerically via Excel and VBA. In addition, this was applied to analyze the effects of the thickness and inner diameter of the pressure vessel on the service life.