• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.48-53
• /
• 2011

We investigated thermal stability improvement of exo-tetrahydrodicyclopentadiene (exo-THDCP) with thermal stabilizers (additives). The reaction products were sample during the reactions. The compositions of products were determined by gas chromatography-mass spectrometry (GC-MS) to measure thermal decomposition products of exo-THDCP and to specify mechanism for thermal stabilizers. Hydrogen donors (thermal stabilizers) such as 1,2,3,4-tetrahydroquinoline (THQ), benzyl alcohol (BnOH) increased thermal stability of exo-THDCP. These materials donated hydrogen to radical of exo-THDCP produced after initiation of exo-THDCP. We found that stabilization of exo-THDCP radicals decreased activity of primary products of exo-THDCP and lowered formation of secondary products (above-$C_{11}$ products).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.294-299
• /
• 2010

Thermal stability of exo-tetrahydrodicyclopentadiene (exo-THDCP) were investigated in a batch-type reactor perfectly coated with quartz. The 1 ml liquid product, which was a sufficiently small amount so as not to affect the reaction pressure, was sampled at 90 min intervals during the reaction and determined by gas chromatography-mass spectrometry (GC-MS) to measure thermal decomposition products of exo-THDCP and specify mechanism for additives (thermal stabilizer). Hydrogen donors (thermal stabilizer) such as 1,2,3,4-tetrahydroquinoline (THQ), benzyl alcohol (BnOH) increased thermal stability of exo-THDCP. These materials donated hydrogen to radical of exo-THDCP produced after initiation of exo-THDCP to decrease activity of primary products of exo-THDCP.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.36-43
• /
• 2016

The leaching behaviors of copper from chalcopyrite were investigated by sulfuric acid. The leaching of copper was examined according to concentration of sulfuric acid, leaching temperature and addition of hydrogen peroxide and ethylene glycol. The concentrations sulfuric acid and hydrogen peroxide in the leaching solution were increased, the leaching efficiencies of Cu were increased. At $30 -60^{\circ}C$, the leaching efficiency of Cu was increased but it was decreased at $70 - 80^{\circ}C$. The results were due to the increasing of hydrogen peroxide decomposition in the solution above $70^{\circ}C$. In the case of ethylene glycol added at $80^{\circ}C$, the decomposition of hydrogen peroxide was decreased and the leaching efficiency was increased. As a result of SEM analysis of leaching residue after leaching, the residue was found to porous form in the case of the ethylene glycol added and then the leaching efficiency of Cu was increased by the increase of surface area under $60^{\circ}C$ with ethylene glycol.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.1
• /
• pp.3-12
• /
• 2001

During ozonation process, the hydroxyl radical generation rates were measured under different experimental conditions (ozone feed rate, nitrobenzene concentration, hydroxyl radical scavenger, pH, HO$_2$O$_2$/O$_3$ etc.) Nitrobenzene could be decomposed by hydroxyl radical rather than ozone only and nitrobenzene decomposition rate was expressed with functions of ozone and nitrobenzene concentration. The rate was decreased as the hydroxyl radical scavenger concentration was increased, and all results were followed pseudo first-order reaction. Using a competitive method, hydroxyl radical generation rate was measured with probe compound and scavenger. It was proportional to ozone concentration, and 0.24mo1 of hydroxyl radical was produced with 1mol of ozone. Under different pH conditions, hydroxyl radical generation rates were measured (pH 10.2 (0.91Ms$^{-1}$ ) > pH 7.3 (0.72Ms$^{-1}$ ) > pH 5.6 (0.67Ms$^{-1}$ ) > pH 3.4 (0.63Ms$^{-1}$ )) showing higher generation rate at high pH values. Addition of hydrogen peroxide promoted the generation rate of hydroxyl radical. Considering the results of pH experiments and addition of hydrogen peroxide experiments, the hydroxyl radical generation rate was 1.6 times higher in hydrogen peroxide solution than in high pH solution, indicating addition of hydrogen peroxide is better promoter to produce the hydroxyl radical in ozonation. These results could be applied to AOPs to remediate the contaminated wastewater and groundwater.

• Journal of Hydrogen and New Energy
• /
• v.24 no.1
• /
• pp.1-11
• /
• 2013

Additives such as glycerol, methanol, acetone, and ethanol were used to prevent $NaBO_2$ from precipitation, and their effects on hydrogen generation properties of $NaBH_4$ hydrolysis were investigated. When the concentration of additives was 5 wt%, the additives such as methanol, acetone, and ethanol could not prevent $NaBO_2$ precipitation. Although glycerol prevented $NaBO_2$ precipitation, conversion efficiency decreased to 78.0% due to its viscosity. Based on test results, hydrogen generation tests were also performed at various concentration of glycerol and methanol to investigate the concentration effects on hydrogen generation properties. As the concentration of glycerol increased from 1 wt% to 3 wt%, conversion efficiency increased owing to additive effect. When its concentration increased to 5 wt%, conversion efficiency decreased due to its viscosity. As the concentration of methanol increased from 5 wt% to 10 wt%, conversion efficiency increased owing to additive effect. When its concentration increased to 15 wt%, conversion efficiency decreased due to $NaB(OCH_3)_4$ precipitate. Although conversion efficiency decreased about 1% when 3 wt% glycerol was added, $NaBO_2$ precipitation was prevented. Consequently, addition of 3 wt% glycerol to $NaBH_4$ solution improves stability of hydrogen generation system.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.577-583
• /
• 2007

To overcome certain disadvantages of past typical control techniques for toxic contaminants emitted from various industrial processes, the current study was conducted to establish a thermal catalytic system using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst and to evaluate catalytic thermal destruction of five chlorinated hydrocarbons[chlorobenzene(CHB), chloroform(CHF), perchloroethylene (PCE), 1,1,1-trichloroethane(TCEthane), trichloroethylene(TCE)]. In addition, this study evaluated the catalyst poison effect on the catalytic thermal destruction. Three operating parameters tested for the thermal catalyst system included the inlet concentrations, the incineration temperature, and the residence time in the catalyst system. The thermal decomposition efficiency decreased from the highest value of 100% to the lowest value of almost 0%(CHB) as the input concentration increased, depending upon the type of chlorinated compounds. The destruction efficiencies of the four target compounds, except for TCEthane, increased upto almost 100% as the reaction temperature increased, whereas the destruction efficiency for TCEthane did not significantly vary. For the target compounds except for TCEthane, the catalytic destruction efficiencies increased up to 30% to 97% as the residence time increased from 10 sec to 60 sec, but the increase of destruction efficiency for TCEthane stopped at the residence time of 30 sec, suggesting that long residence times are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Conclusively, the current findings suggest that when applying the transition-metal catalyst for the better destruction of chlorinated hydrocarbons, VOC type should be considered, along with their inlet concentrations, and reaction temperature and residence time in catalytic system. Meanwhile, the addition of high methyl sulfide(1.8 ppm) caused a drop of 0 to 50% in the removal efficiencies of the target compounds, whereas the addition of low methyl sulfide (0.1 ppm), which is lower than the concentrations of sulfur compounds measured in typical industrial emissions, did not cause.

• Korean Journal of Food Science and Technology
• /
• v.17 no.5
• /
• pp.389-398
• /
• 1985

To shorten the processing of cheese slurry, four different slurries, ie, Control, Cheddar 1 and 2, and Italian-type that were made of Na-caseinates, cream, trace elements, lactic culture, and enzymes were fermented at $30^{\circ}C$ for 7days with daily stirring. PH, titratable acidity, soluble nitrogen, viable cell count, active SH groups, total volatile fatty acid, free fatty acid, electrophoretic patterns of degraded caseins, and viscosity were analyzed to investigate physicochemical properties of fermented slurries. Acid production was accelerated in the cheese slurries with protease than that without the enzyme and PH of the former was decreased after three days of fermentation to 4.90. The Change of titratable acidity agreed to PH patterns. Soluble nitrogen of the Control slurry was increased slowly for four days and then rapidly to 40% of total nitrogen while those containing protease to 70%. The protease of lactic cultures used (Streptococcus lactis and Streptococcus cremoris) broke down as-casein more rapidly than $\beta$-casein and most proteins were degraded to peptides and amino acids after three days of fermentation. Total volatile fatty acids were increased by added lipase and free fatty acids composition analyzed by GLC in cheddar slurry with 0.00001% lipase was similar to that of commercial cheddar cheese, while that in Italian-type slurry was a half of that in commercial Italian cheese. Active SH groups were increased in the cheese slurries with glutathione from fourth day of fermentation. The viscosity of slurries decreased very rapidly by addition of protease.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.344-351
• /
• 2018

The IR spectra of gaseous phenanthrene, phenathrenols, phenanthrenyl radicals, and hydroxylphenanthrene radicals have been obtained using the BLYP/6-311++G(d,p) method. A comparison of these spectra shows that the measurements of IR spectra can be valuable to identify the reaction pathway(s) of the phenanthrene decomposition reaction by ${\cdot}OH$. We have found that the H atom abstraction reaction process can be easily identifiable from the $650-850cm^{-1}$ (CH out-of-plane bending) region and the ${\cdot}OH$ addition reaction process from the CH stretching and bending modes region of IR spectra. In addition, the calculated IR spectra of all five phenanthren-n-ols (n = 1, 2, 3, 4, 9) have also given in this work.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.69-76
• /
• 2012

This study focuses both on the quantitative measurement of hydroxyl radicals formed by an electron beam (E-beam) process and on the decomposition of pentachlorophenol(PCP) in the presence of $H_2O_2$ and $Fe^{3+}-EDTA$ as additives. To attain this objective, the quantitative measurement of hydroxyl radical was performed with the hydroylation of benzoic acid (BA), producing hydroxybenzoic acid (OHBA). As a result, the concentrations of hydroxyl radical measured were lower than those of hydroxyl radical predicted. Probably, it indicates that the reactive species generated during E-beam irradiation are able to scavenge the hydroxyl radicals. In particular, the degradation of PCP was promoted by the addition of $H_2O_2$ (< 1mM). On the other hand, its degradation as well as the generation of chloride ions as a by-product was inhibited by the addition of $H_2O_2$ (> 1mM), and thus carbon yield(%) of oxalic acid as a by-product was increased. During E-beam irradiation the addition of $Fe^{3+}-EDTA$ effectively decomposed the PCP, thus increasing the G-values. Considering the formation of OHBA and the decomposition of PCP, these results suggest that the addition of $Fe^{3+}-EDTA$ in the E-beam process can produce the further hydroxyl radicals and enhance the efficiency of PCP decomposition at low dose.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.721-730
• /
• 2006

The effects of compost amendment on the removal of petroleum hydrocarbons and the activities of microorganisms in soil ecosystem have been studied in bioremediation of diesel contaminated soil. The relation between biological activities and removal of petroleun hydrocarbon was determined by ATP(Adenisine Triphosphate), n-alkanes and TPH concentration analysis. After 80 days of bioremediation, the removal of TPH in soil amended with compost increased more than 10% compared with control soil which was tilled in the same condition without compost addition. The biodegradations of n-alkanes having 12 to 20 moles of carbon were distinctive. As the soil was contaminated with more diesel, the ATP has decreased rapidly. When the TPH amounted to 80,000 mg diesel/kg, the ATP decreased to 4 ng/g from initial concentration of 65 ng/g. While the ATP in the compost amended soil increased to 112 ng/g after tilling for 6 days, the ATP in the control increased to merely 36 ng/g after tilling for 14 days. Also while the control soil showed a lag time in ATP increase, the compost amended soil did not show that but showed a rapid ATP increase within a short time. The patterns of changes in ATP concentration were similar to those in daily removals of TPH with time difference of about 7 days.