• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.286-289
• /
• 1995

To find composition of white crystals in canned bamboo shoots, the solubility in distilled water or dilute HCl solution, organic acid composition, mineral composition and amino acid composition of white crystals were analyzed. The contents of ash, protein, fat and carbohydrate were 55.12%, 14.21%, 0.70% and 29.97% respectively. Only oxalic acid was detected by HPLC analysis as an organic acid. Judging from solubility of white crystals, the type of salt was Ca-oxalate. The content of calcium was 72.68% in total amount of minerals. The content of tyrosine was 75.23% in total amount of protein. In conclusion, white crystals was constituted by Ca-oxalate and tyrosine complex.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2016

Zinc oxide of hexagonal wurzite, is known as n-type semiconductor. It has a wide band gap energy of 3.37 eV and large exciton binding energy of 60 meV. It can be widely applied to gas sensors, laser diodes, dye-sensitized solar cells and degradation of dye waste. The use of microwave hydrothermal synthesis brings a rapid reaction rate, high yield, and energy saving. Amine additives control the different particle shapes because of the chelate effect and formation of hydroxide ion. In this study, zinc nitrate hexahydrate was used as zinc precursor. In addition, ethanolamine, ethylenediamine, diethylenetriamine, and hexamethylenetetramine are used as shape control agent. The pH value was controlled as 11 by NaOH. The shapes of zinc oxide are star-like, rod, flower-like, and circular cone. In order to analyze physical, chemical, and optical properties of ZnO with diverse amine additives, we used XRD, SEM, EDS, FT-IR, UV-Vis spectroscopy, and PL spectroscopy.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.39-45
• /
• 2007

Optimum condition for neutralization has been studied to remove the copper and zinc ions from spent sulfate solutions which resulted from the acid washing of the base of brass bulb. Chemical distribution of copper and zinc species and the variation of solubility of the two ions with solution pH were obtained by considering the complex formation reaction and mass balance. Removal percentage of zinc was more sensitive to solution pH than that of copper. This results from the fact that the solubility of zinc is higher than that of copper. The form of coagulant affected little the removal percentage of zinc, while addition of coagulant as the phase of solution resulted in higher removal percentage of copper than as the phase of solid.

• Journal of Korea Foresty Energy
• /
• v.21 no.3
• /
• pp.18-27
• /
• 2002

Pine bark was liquefied in the presence of phenol using organic sulfonic acids as catalysts, and the liquefied barks were characterized. It was found that the organic sulfonic acids were more effective catalysts than hydrochloric acid for complete liquefaction of pine bark. The liquefied barks prepared from phenol-organic sulfonic acid liquefaction were highly phenolated, and the amounts of combined phenol were 2-3 times greater than that of the liquefied bark obtained from phenol-hydrochloric acid liquefaction. The glass transition points (Tg) were lower than that of the liquefied barks prepared from phenol-hydrochloric acid. It can be concluded that by using the organic sulfonic acids, the phenol used as a liquefying reagent is highly introduced into the bark, resulting in the phenolated bark preventing further condensation reactions, which may occur during the liquefaction. The carbohydrates such as cellulose and hemicellulose in the liquefied barks were almost decomposed during the liquefaction, from the results of IR spectra and neutral sugar analyses. Energy dispersive X-ray spectromery (EDS) results from the residues and the liquefied barks showed that the organic sulfonic acid catalysts did not lead to serious corrosion of the reactor compared with the hydrochloric acid catalyst.

• Resources Recycling
• /
• v.11 no.3
• /
• pp.10-16
• /
• 2002

In the leaching of $LiCoO_2$with a strong acid such as sulfuric and nitric acid, an additional step was needed to recover cobalt and lithium separately from spent lithium ion batteries (LIBs). The leaching of $LiCoO_2$in an oxalic acid solution was investigated to recover cobalt selectively using a low solubility of cobalt oxalate at low pH. Leaching efficiency of 95% of lithium and less than 1% of cobalt were obtained when pure $LiCoO_2$powder was leached in 3M oxalic acid at $80^{\circ}C$ and 50 g/L pulpdensity. Under the above leaching conditions, complete dissolution of lithium was accomplished with mere 0.25% of cobalt in the solution when the cathodic active material collected from spent LIBs was employed. The lithium in the leaching solution can be recovered as a form of carbonate or hydroxide depending on the addition of $Na_2$$CO_3$or LiOH.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.23-28
• /
• 1992

The process for recovery of acids and valuable metals such as nickel and chromium from the stainless-steel pickling acids has been developed vased on the use of solvent extraction technique. Until now, several processes for the treatment of waste acids were already developed in such countries as Japan, Swden and Canada. Those methods are, however, forcussed on the recovery of acids from them discarding the metals included in them as the hydroxides sludge. In the present work, the recovery of nickel and chromium in addition to nitric acid and hydrofluoric acid has been aimed so as to recycle them to the stainless-steel pickling lines and also to minimize the amount of sludge generated during the treatment of waste acids. The establishment of the process to recover the acids has been carried out based on the solvent extraction with TBP. The iron was eliminated from the waste solutions by precipitating in the form of hydroxide through the adjustment of pH with calcined limestone and the selective extration of chromium and nickel from the resultant solutions has been conducted by using D2EHPA as extractant.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.229.2-229.2
• /
• 2013

Yttrium oxide (Y2O3)는 band gap이 5.5 eV 정도로 상대적으로 넓고, 굴절상수가 1.8, 유전율이 10~15, Silicon 과의 격자 불일치가 작은 특성을 가지고 있다. 또한 녹는점이 높아 열적으로 안정하기 때문에 전자소자 및 광학소자에 다양하게 응용되는 물질이다. Y2O3 박막은 다양한 방법으로 증착할 수 있는데, 그 방법에는 e-beam evaporation, laser ablation, sputtering, thermal oxidation, metal-organic chemical vapor deposition, and atomic layer deposition (ALD) 등이 있다. ALD는 기판 표면에 흡착된 원자들의 자기 제한적 반응에 의하여 박막이 증착되기 때문에 박막 두께조절이 용이하고 step coverage와 uniformity 측면에서 큰 장점이 있다. 이전에는 Y(thd)3 and Y(CH3Cp)3 와 같은 금속 전구체를 이용하여 ALD를 진행하여, 증착 속도가 낮고 defect이 많아 non-stoichiometric한 조성의 박막이 증착되는 문제점이 있었다. 이번 연구에서는, (iPrCp)2Y(iPr-amd)와 탈이온수를 사용하여 Y2O3 박막을 증착하였다. Y2O3 박막 증착에 사용한 Y 전구체는 상온에서 액체이고 $192^{\circ}C$ 에서 1 Torr의 높은 증기압을 갖는다. Y2O3 박막 증착을 위하여 Y 전구체는 $150^{\circ}C$ 로 가열하여 N2 gas를 이용하여 bubbling 방식으로 공정 챔버 내로 공급하였다. Y2O3 박막의 ALD window는 $250{\sim}350^{\circ}C$ 였으며, Y 전구체의 공급시간이 5초에 다다르자 더 이상 증착 두께가 증가하지 않는 자기 제한적 반응을 확인할 수 있었다. 그리고 증착된 Y2O3 박막의 특성 분석을 위해 Atomic force microscopy (AFM)과 X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) 를 진행하였다. 박막의 Surface morphology 는 매끄럽고 uniform 하였으며, 특히 고체 금속 전구체를 사용했을 때와 비교하여 수산화물이 거의 없는 박막을 얻을 수 있었다. 그리고 조성 분석을 통해 증착된 Y2O3 박막이 stoichiometric하다는 것을 알수 있었다. 또한 metal-insulator-metal (MIM) 구조 (Ru/Y2O3/Ru) 의 resistor 소자를 형성하여 저항 스위칭 특성을 확인하였다.

• Journal of Powder Materials
• /
• v.28 no.6
• /
• pp.497-501
• /
• 2021

Cobalt (Co) is mainly used to prepare cathode materials for lithium-ion batteries (LIBs) and binder metals for WC-Co hard metals. Developing an effective method for recovering Co from WC-Co waste sludge is of immense significance. In this study, Co is extracted from waste cemented carbide soft scrap via mechanochemical milling. The leaching ratio of Co reaches approximately 93%, and the leached solution, from which impurities except nickel are removed by pH titration, exhibits a purity of approximately 97%. The titrated aqueous Co salts are precipitated using oxalic acid and hydroxide precipitation, and the effects of the precipitating agent (oxalic acid and hydroxide) on the cobalt microstructure are investigated. It is confirmed that the type of Co compound and the crystal growth direction change according to the precipitation method, both of which affect the microstructure of the cobalt powders. This novel mechanochemical process is of significant importance for the recovery of Co from waste WC-Co hard metal. The recycled Co can be applied as a cemented carbide binder or a cathode material for lithium secondary batteries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.100-106
• /
• 2022

Ships are built according to the purpose and operated with individual goals. Operational goals are reflected in the design of the ships and become the main criterion for determining the required ship ability. In general, cargo ships and passenger ships are objectively evaluated in terms of the operation part of the ship and the capacity part of the cargo or passenger, centering on their transportation ability. In consideration of the required ship ability, the built ship can expect effects such as economic feasibility and eco-friendliness in addition to basic characteristics such as stability. Accordingly, the concept of ship ability is expected to be effectively used in the field of training-only ship management by each institution, which plays a pivotal role in training ship-officers. In this study, the basic direction was verified for the ship ability evaluation criteria of training-only ships through the analysis of the internal space of two training-only ships of the Korea Institute of Maritime and Fisheries Technology, which were recently built with a time lag. In the process of building training-only ship or general-purpose training ship, the possibility of using the ship ability standards in securing budget and designing was derived.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.710-718
• /
• 2021

Recently, due to high theoretical capacitance and excellent ion diffusion rate caused by the 2D layered crystal structure, transition metal hydroxides (TMHs) have generated considerable attention as active materials in supercapacitors (or electrochemical capacitors). However, TMHs should be designed using morphological or structural modification if they are to be used as active materials in supercapacitors, because they have insulation properties that induce low charge transfer rate. This study aims to modify the morphological structure for high cycling stability and fast charge storage kinetics of TMHs through the use of nickel cobalt hydroxide [NiCo(OH)₂] decorated on nickel foam. Among the samples used, needle-like NiCo(OH)₂ decorated on nickel foam offers a high specific capacitance (1110.9 F/g at current density of 0.5 A/g) with good rate capability (1110.9 - 746.7 F/g at current densities of 0.5 - 10.0 A/g). Moreover, at a high current density (10.0 A/g), a remarkable capacitance (713.8 F/g) and capacitance retention of 95.6% after 5000 cycles are noted. These results are attributed to high charge storage sites of needle-like NiCo(OH)₂ and uniformly grown NiCo(OH)₂ on nickel foam surface.