• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.664-668
• /
• 2005

근래 지속적으로 진행된 도시화 및 산업화로 인하여 이전보다 불투수 지역이 많이 증가하였고 도심지역에는 대부분 하수관거가 매설되어 있는 등 물순환이 과거에 비해 현저하게 왜곡되어 있다. 이를 올바르게 바로잡기 위해서는 과거와 현재의 수문학적 상태에 대한 정확한 이해가 우선적으로 요구된다. 본 연구에서는 안양천 유역의 지류인 학의천을 대상유역으로 선정하고 유출 수량 및 오염물질 발생량을 PCSWMM(Storm Water Management Model)과 PLOAD(Pollutant Loading)를 이용하여 모의하였다. PCSWMM은 하수관거를 포함하여 연속유출모의를 수행할 수 있으며 PLOAD는 GIS를 기반으로 하는 Screening 모형으로 토지이용별 원단위를 이용하여 소유역에서 발생하는 오염량을 추정할 수 있다. 기준년도 2002년에 대해 모든 조건은 동일한 상태에서 토지이용만 1975년, 2000년, 2016년으로 변화시켜 모의를 수행하였다. 1975년, 2000년, 2016년의 불투수 면적비는 각각 $2.6\%,\;22.8\%,\;24.1\%$이며 침투량은 1975년의 $23\%$에서 2000년과 2016년에 각각 $17.9\%와\;17.6\%$로 감소하였고, 이로 인해 지표유출량은 1975년의 $48.1\%$보다 2000년과 2016년에 각각 $55.0\%,\;55.4\%$로 증가하였다. 또한 오염물질이 유역에서 발생하여 하천으로 전달되는 유달량은 유역전체로 보면 1975년 보다 2000년에 BOD는 4.0배, COD는 3.3배, SS는 2.7배, TN은 1.3배, TP는 1.6배 증가하였다. 이러한 모의 결과는 학의천 유역에 대해 소유역별로 발생하는 연도별 유출량 및 오염물질 유달량을 정량적으로 제시하므로 유역관리방안을 도출하는데 효과적으로 활용될 수 있다.최대화하기 위한 환경관리 방안 제시에 중점을 두어 수행하였다.ncy), 환경성(environmental feasibility) 등을 정성적으로(qualitatively) 파악하여 실현가능한 대안을 선정하였다. 이렇게 선정된 대안들은 중유역별로 검토하여 효과가 있을 것으로 판단되는 대안들을 제시하는 예비타당성(Prefeasibility) 계획을 수립하였다. 이렇게 제시된 계획은 향후 과학적인 분석(세부평가방법)을 통해 대안을 평가하고 구체적인 타당성(feasibility) 계획을 수립하는데 토대가 될 것이다.{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고 있다.교하여 유의한 차이가 관찰되지 않았다. 또한 HSP 환자군에서도 $IL1RN^{*}2$ a

• Journal of Korea Water Resources Association
• /
• v.52 no.12
• /
• pp.1075-1086
• /
• 2019

Recently, as the incidence of climate warming and abnormal climate increases, the forecasting of hydrological factors such as precipitation and river flow is getting more complicated, and the risk of water shortage is also increasing. Therefore, this study aims to develop a model for predicting the amount of water intake in mid-term. To this end, the correlation between water intake and meteorological factors, including temperature and precipitation, was used to select input factors. In addition, the amount of water intake increased with time series and seasonal characteristics were clearly shown. Thus, the preprocessing process was performed using the time series decomposition method, and the support vector machine (SVM) was applied to the residual to develop the river intake prediction model. This model has an error of 4.1% on average, which is higher accuracy than the SVM model without preprocessing. In particular, this model has an advantage in mid-term prediction for one to two months. It is expected that the water intake forecasting model developed in this study is useful to be applied for water allocation computation in the permission of river water use, water quality management, and drought measurement for sustainable and efficient management of water resources.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1105-1116
• /
• 2014

A stochastic rainfall model, NSRPM (Neyman-Scott Rectangular Pulse Model), is able to reflect the cluster characteristics of rainfall events which is unable in the RPM (Rectangular Pulse Model). Therefore NSRPM has advantage in the hydrological applications. The NSRPM consists of five model parameters and the parameters are estimated using optimization techniques such as DFP (Davidon-Fletcher-Powell) method and genetic algorithm. However the DFP method is very sensitive in initial values and is easily converge to local minimum. Also genetic algorithm has disadvantage of long computation time. Nelder-Mead method has several advantages of short computation time and no need of a proper initial value. In this study, the applicability of parameter estimation methods was evaluated using rainfall data of 59 national rainfall networks from 1973-2011. Overall results demonstrated that accuracy in parameter estimation is in the order of Nelder-Mead method, genetic algorithm, and DFP method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.40-51
• /
• 2014

This study aims to investigate urban inundation considering building footprints based on dual-drainage scheme. For this purpose, LiDAR data is cultivated to generate two original data set in terms of DEM with $1{\times}1$ meter and building layer of the study drainage area in Seoul and then the building layer is overlapped as vector polygon with the mesh data with the same size as DEM. Then, terrain data for modeling were re-sampled to reduce resolution as $10{\times}10$ meters. As results, the simulated depth without considering building footprints has a tendency to underestimate the inundation depth compared to observed data analized by CCTV imagery. Otherwise, the simulation result considering building footprints revealed definitely higher fitness. The difference of inundation depth came from the variation of inundation volume which was relevant to inundation extent. If the building footprints are enlarged, the possible inundation depth is increased, which results in being inundation depth higher because hydrological conditions such as rainfall depth are conservational. Otherwise, according to comparison of inundation extents, there were no significant difference but the case of considering building footprint was revealed slightly higher fitness. Thus, it is concluded that the considering building footprint for inundation analysis of urban watershed should be required to improve simulation accuracy synthetically.

• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.991-1000
• /
• 2011

The relationship between discharge (Q) and suspended sediment (SS) concentration often is used for the estimation of inflow SS concentration in reservoir turbidity modeling in the absence of actual measurements. The power function, SS=aQb, is the most commonly used empirical relation to determine the SS load assuming the SS flux is controlled by variations of discharge. However, Q-SS relation typically is site specific and can vary depending on the season of the year. In addition, the relation sometimes shows hysteresis during rising limb and falling limb for an event hydrograph. The objective of this study was to examine the hysteresis of Q-SS relationships through continuous field measurements during flood events at inflow rivers of Yongdam Reservoir and Soyang Reservoir, and to analyze its effect on the bias of SS load estimation. The results confirmed that Q-SS relations display a high degree of scatter and clock-wise hysteresis during flood events, and higher SS concentrations were observed during rising limb than falling limb at the same discharge. The hysteresis caused significant bias and underestimation of SS loading to the reservoirs when the power function is used, which is important consideration in turbidity modeling for the reservoirs. As an alternative of Q-SS relation, turbidity-SS relation is suggested. The turbidity-SS relations showed less variations and dramatically reduced the bias with observed SS loading. Therefore, a real-time monitoring of inflow turbidity is necessary to better estimate of SS influx to the reservoirs and enhance the reliability of reservoir turbidity modeling.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.519-535
• /
• 2012

In order to establish a rainfall-runoff model, calibration of hydrological parameters for the model is very important. Especially, Curve Number(CN), estimated by NRCS method, is a main factor to apply unit hydrograph theory to calculation of peak discharge. For using NRCS method, it is needed selecting AMC because CN is strongly connected with that. In this study, we focus our concern on finding a applicable standard for selecting AMC for CN. For this, three dams which are Boryeong, Habchon, Namgang are selected as target basins to use observed data including rainfall and dam inflow. As a result of this research, it is found that CN must be included as a calibrated parameter to calculate effective rainfall for the rainfall-runoff model. Also, it is preferred to use PWRMSE of HEC-HMS program as a objective function for optimizing hydrological parameters. From the analyzing result of variation of AMC for peak discharge, it is recommended to apply AMC-III to estimation of CN for calculating effective rainfall of design hydrograph.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.470-474
• /
• 2007

본 논문에서는 하천복원사업으로부터 발생하는 사회 경제적 편익의 측정 및 평가를 위한 기준 및 지표를 다루고자 한다. 하천복원사업의 목적 및 하천의 기능 및 사업의 영향을 기초로 선정된 평가 기준은 크게 생태적 측면과 사회 경제적 측면으로 나눌 수 있다. 본 연구에서 생태적 측면이 강조되는 것은 하천 생태의 다양한 측면을 파악하는 것이 사회 경제성 연구에 있어 풍부한 논의의 가능성을 제공해주는 측면이 있기 때문이다. 이는 하천복원사업이 가지는 복합적인 성격으로 인해 사업의 사회적, 경제적, 생태적 영향이 서로 고립되지 않고 영향을 주고받는 것에서 연유한다. 첫 번째 평가 기준인 생태적 측면에서는 세부기준으로 생태계 및 수문부문 등의 변화를 포함하며, 복원사업 전후의 서식처 및 생물 종 다양성의 변화, 하상의 다양화 등을 지표로 고려할 수 있다. 나머지 큰 평가 기준인 사회 경제적 측면에서는 홍수방지 효과나 수질개선 효과와 같은 우리가 생태계로부터 제공받는 직접적인 서비스나 토지 이용의 변화 및 그 변화에서 야기되는 영향(하천의 친수 기능이나 학습효과 등), 복원사업의 관리 및 비용 측면 등을 세부기준으로 고려할 수 있다. 하천복원사업의 구체적인 평가를 위해, 각 세부기준에 대한 지표는 현 복원사업에서 실시되는 평가기법, 하천복원관련 문헌조사 및 사례조사를 통해 검토하여 일차적으로 선정한다. 각 지표는 고려하고자 하는 특성에 따라 정량화가 용이한 지표와 정성적 측면이 강한 지표로 나뉜다. 이렇게 선정된 지표는 전문가 조사를 통해 지표에 대한 의견을 수렴하여 확정한다.한 치즈곤죽에서는 쓴맛 펩타이드가 형성되었다가 사라짐을 관찰할수 있었다. 한편 지질분해효소를 침가할 경우 총 휘발성산이 4일 이후에 급격히 증가함을 통해 사용한 효소는 유지방을 잘 분해함을 알 수 있었으며 GLC에 의한 유리 지방산의 분석 결과는 Cheddar치즈곤죽은 시판Cheddar 치즈와 비슷하고 Italian형 치즈곤죽은 시판 Italian치즈보다 약간 떨어졌다. Cheddar치즈의 중요한 품미성분인 활성 SH기는 glutathione을 첨가한 치즈곤죽에서 발효 4일부터 증가하였으며 단백질분해효소를 함께 첨가할 경우 그 증가현상이 현저하였다. 단백질분해요소의 첨가유무에 따라 점도 변화는 다른 두 가지 양상으로 나타나 효소를 첨가할 경우 단백질이 분해됨에 따라 점도가 급격히 감소하였다.>${\pm}0.36$) %, 0.34(${\pm}0.27$) %, 0.34(${\pm}0.18$) % 의 오차를 보였다 중간에 6 cm 의 PP 을 위치한 경우에는 에너지별로 1.15(${\pm}1.86$) %, 0.90(${\pm}1.43$)%, 0.86(${\pm}1.01$)% 의 오차를 나타내었다. 이 경우에는 PCD 10 cm 의 경우에 비교적 큰 오차를 보였으며 PCD 10 cm 인 경우를 제외하면 에너지별로 0.47(${\pm}1.17$) %, 0.42(${\pm}0.96$) %, 0.55(${\pm}0.77$0.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.1
• /
• pp.30-41
• /
• 2016

The temporal variation of soil water storage is important in hydrological modeling. In order to evaluate an antecedent wetness state, the antecedent precipitation index (API) has been used. The aim of this article is to compare observed soil water storage with APIs calculated by widely used four equations, to configure the relationship between soil water storage and API by a regression model for one-year(2009), and to predict the soil water storage for the next two years(2010~2011). The soil water storage was evaluated from the observed soil moisture dataset in soil depths of 10, 30, 60cm at 21 locations by TDR measurement system for 3 years. As a result, API with the exponential function among the four equations can describe the variation of the observed soil water storage. Monthly optimized parameters of the API's equations seemed to be roughly related with the (potential) evapotranspiration (PET). Using revised monthly optimized parameters of APIs considering the seasonal pattern of PET, we characterize the relationship between API and the observed soil water storage for one year, which looks better than those of other researches.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.2
• /
• pp.88-99
• /
• 2007

Soil moisture is one of the essential components in determining surface hydrological processes such as infiltration, surface runoff as well as meteorological, ecological and water quality responses at watershed scale. This paper discusses soil moisture transfer processes measured at hillslope scale in the Gwangneung forest catchment to understand and provide the basis of stochastic structures of soil moisture variation. Measured soil moisture series were modelled based upon the developed univariate model platform. The modeling consists of a series of procedures: pre-treatment of data, model structure investigation, selection of candidate models, parameter estimation and diagnostic checking. The spatial distribution of model is associated with topographic characteristics of the hillslope. The upslope area computed by the multiple flow direction algorithm and the local slope are found to be effective parameters to explain the distribution of the model structure. This study enables us to identify the key factors affecting the soil moisture distribution and to ultimately construct a realistic soil moisture map in a complex landscape such as the Gwangneung Supersite.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.75-89
• /
• 2013

This paper describes a GIS-based geohydrologic methodology, called YSGWF (YonSei GroundWater Flow) for predicting the rainfall infiltration-groundwater flow of slopes. This physical-based model was developed by the combination of modified Green-Ampt model that considers the unsaturated soil parameters and GIS-based raster model using Darcy's law that reflects the groundwater flow. In the model, raster data are used to simulate the three dimensional inclination of bedrock surface as actual topographic data, and the groundwater flow is governed by the slope. Also, soil profile is ideally subdivided into three zones, i.e., the wetting band zone, partially saturated zone, and fully saturated zone. In the wetting band and partially saturated zones the vertical infiltration of water (rainfall) from surface into ground is modeled. When the infiltrated water recharges into the fully saturated zone, the horizontal flow of groundwater is introduced. A comparison between the numerical calculation and real landslide data shows a reasonable agreement, which indicate that the model can be used to simulate real rainfall infiltration-groundwater flow.