• Spatial Information Research
• /
• v.15 no.2
• /
• pp.181-187
• /
• 2007

To make digital terrain data, automatic correlation matching by stereo airborne/satellite images has been researched. The result of automatic correlation matching has a limit on extracting exact ground height because of angle of sensor, tree of height. Therefore, the amount of editing works depend on the distribution of spatial feature in images as well as image quality. This paper shows that the automatic correlation matching result was affected by density and height of tree.

• 수목보호
• /
• s.3
• /
• pp.33-38
• /
• 1997

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.55-61
• /
• 2012

The primary factors of the LOS(Line-of-Sight) analysis process are terrain height, camera capacity, and canopy cover. The canopy cover rate differs depending on the changing season, and its value is influenced by the tree density, tree height, and etc. This study generated the canopy cover value based on relationship between NDVI(Normalized Difference Vegetation Index) and DMT(Density Measure % of Tree/Canopy Cover), which is a digital map attribute, and then performed the LOS analysis on six station of test sites. As results, It was found that NDVI and DMT are correlated with each other through the experiments. Based on this finding, new DMT map can be generated using NDVI. Also, There is a difference between the result of visibility analysis using the present DMT and one using a new DMT. Especially, the spatial distributions of the detected visible areas are significantly different between the two visibility analysis results.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.334-335
• /
• 2000

울산지역의 고정배출 및 이동배출원과 같은 각종 배출원에서 발생되는 대기오염물은 건물, 도로, 토양 각종 식물 및 수목, 강, 호수, 바다 등과 같은 아주 다양한 수용체로 침적되고 있다. 최근의 연구에 의하면 울산지역은 대단위 산업공단을 가지고 있는 대형산업도시이므로 대기중의 중금속 농도는 타 지역에 비하여 매우 높고 상당한 정도의 산성비도 내리고 있는 것으로 나타났다. 따라서 본 연구는 울산지역의 수목의 잎에 침적되어 있는 중금속을 산성비수준의 pH로 조절한 산성용액으로 용출하여 그 성분을 분석하여 각종 대기 오염물이 나무를 비롯한 식물에 침적되는 정도를 각 특성지역별로 비교ㆍ분석하였다. (중략)

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.87-90
• /
• 2012

원자력발전소에 사용되는 모든 시스템은 IEEE에서 최고 수준의 안전도인 CLASS 1E로 분류된다. 그중에서 안전계통은 원자력발전소 안전에 관련한 모든 분야를 관리하는 계통이다. 산업이 발전함에 따라 안전계통 또한 그 규모와 복잡성이 높아지고 있고, 이에 적용되는 요구사항 또한 엄격해지고 있다. 따라서 발전소에 적용되는 안전 동작에 대한 기준을 결정하기 위해서 철저한 오류 예측분석이 수행 되어야 한다. 그 중에서도 NUREG-0492로 규정되어 있는 결함수목분석(Fault Tree Analysis)은 연역적 오류 예측 분석방법으로 원자력 발전소, 우주 산업 등에 관련된 분야는 본 방법을 통하여 오류 예측 분석이 이루어 져야한다. 본 논문에서 원전안전계통을 관리하는 구현 모델인 원전안전등급제어기기(Safety Programmable Logic Controller)에 대하여 결함수목분석을 통한 오류 예측 분석을 하였다. 또한, 위의 구조에 대하여 MSC(Message Sequence Chart)를 통한 모델링을 수행하여, 결함수목분석을 적용하는 과정에서 신뢰도 향상을 더하였다.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.700-703
• /
• 2010

In this study, plant extracts including Eucommia ulmoides Oliv. and Phellodendron amurense were studied to test possible application for cosmetics and skin related medicine. Anti-oxidation effect of plant extracts was measured by DPPH free radical scavenging activity and it was insignificant at low concentration, however, it was as good as vitamin C, excellent anti-oxidation agent, at $1000{\mu}g/ml$. Anti-bacterial effect was tested by disc diffusion method, and plant extracts showed mild anti-bacterial effect for normal skin flora, Staphylococcus epidermidis while it indicated strong anti-bacterial effect for acne inducing Propionibacterium acne. Therefore it had powerful potential for anti-acne material because of selectivity. Anti-atopic dermatitis effect was tested by hairless mouse and plant extracts recovered damaged skin to near normal condition after 14 days of treatment. IgE concentration in treated mouse was decreased 16% compared with control. From the research, plant extracts indicated strong anti-acne and anti-atopic dermatitis effect, and showed strong potential for cosmetics and skin related medicine.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.3
• /
• pp.240-252
• /
• 2019

Many of the historic plant specimens collected on the Korean Peninsula in the early twentieth century were lost during the Korean War, though some of them were deposited in the herbarium of Tokyo University (TI) and thus remained unharmed. Data on historic Korean plant specimens at TI are very important given the lack of current data on North Korean plants. Moreover a number of unidentified Korean historic specimens are present at TI. We carried out an identification process and created a list of plants in a newly found collection held by Dr. Ikuma Yoichiro, a Japanese entomologist. He traveled from Cheongjin to Hyesanjin via Baekdu-san (Mt.) in August of 1913 and collected 240 species. We also secured one duplicate set.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.270-277
• /
• 2021

Veronica rotunda var. subintegra (Nakai) T. Yamaz. is perennial herb belonging to the family Scrophulariaceae, native to Korea. Plant growth regulators, cutting mediums, cutting position, and leaf size were examined to investigate the requirements for cutting propagation of V. rotunda var. subintegra. This study was conducted over a period of 6 weeks from March to May 2017 in the Division of Plant Resources, Korea National Arboretum. For all treatments, survival and rooting percentage was 100%. In PGRs experiment, the number of roots and shoot length treated with 100 mg/L IBA treatment was significantly higher than that of NAA treatment. The shooting percentage was decreased with an increase of the PGRs concentration. In growing substrates experiment, the number of roots on commercial soil (61.2) was the highest, followed commercial + kanuma soil (45.7), and the lowest was kanuma soil (41.8). The shoot length treated with commercial soil (8.9 cm) was significantly greater than that of kanuma soil (4.1 cm). In cutting positions experiment, the number of roots treated with apical (56.6) was significantly higher than that of basal (38.8). In leaf-cut experiment, the number of roots and of shoot length treated with full leaf was significantly higher than that of half leaf. As a result, we recommend treating cuttings with 100 mg/L IBA treatment, commercial soil, apical position, and full leaf for successful cutting propagation of V. rotunda var. subintegra.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.27-38
• /
• 2012

As the necessity of forest conservation and management has been increased, various forest studies using LIDAR data have been actively performed. These studies often utilize the tree height as an important parameter to measure the forest quantitatively. This study thus attempt to apply two representative methods to estimate tree height from airborne LIDAR data and compare the results. The first method based on the detection of the individual trees using a local maximum filter estimates the number of trees, the position and heights of the individual trees, and the mean tree height. The other method estimates the maximum and mean tree height, and the crown mean height for each grid cell or the entire area from the canopy height model (CHM) and height histogram. In comparison with the field measurements, 76.6% of the individual trees are detected correctly; and the estimated heights of all trees and only conifer trees show the RMSE of 1.91m and 0.75m, respectively. The tree mean heights estimated from CHM retain about 1~2m RMSE, and the histogram method underestimates the tree mean height with about 0.6m. For more accurate derivation of diverse forest information, we should select and integrate the complimentary methods appropriate to the tree types and estimation parameters.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.4
• /
• pp.441-448
• /
• 2010

This paper estimates the tree height using Airborne LiDAR that is obtained for each season to analyze its influence based on a canopyclosure and data fusion. The tree height was estimated by extracting the First Return (RF) from the tree and the Last Return (LR) from the surface of earth to assume each tree via image segmentation and to obtain the height of each tree. Each data on tree height that is collected from seasonal data and the result of tree height acquired from the data fusion were compared. A tree height measuring device was used to measure on site and its accuracy was compared. Also, its applicability on the result of fused data that is obtained through the Airborne LiDAR is examined. As a result of the experiment, the result of image segmentation for an individual tree was closer to the result of site study for 1 meter interval when compared to the 0.5 meter interval of point cloud. In case of the tree height, the application of fused data enables a closer site measurement result than the application of data for each season.