• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.8-17
• /
• 2005

It is well known that preconditioning methods are efficient for convergence acceleration in the compressible low Mach number flows. In this study, the original Euler equations and three differently nondimensionalized preconditioning methods are implemented in two dimensional inviscid bump flows using the 3rd order MUSCL and DADI schemes as numerical flux discretization and time integration, respectively. The multigrid and local time stepping methods are also used to accelerate the convergence. The test case indicates that a properly modified local preconditioning technique involving concepts of a global preconditioning allows Mach number independent convergence. Besides, an asymptotic analysis for properties of preconditioning methods is added.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.35-38
• /
• 2002

The convergence acceleration methods for the compressible Wavier-Stokes equations are studied ,which are multigrid method and implicit preconditioned multistage time stepping method. In this paper, the performance of implicit preconditioning methods are studied for the full-coarsening multigrid methods on the high Reynolds number compressible flow computations. The effect of numerical flux on the convergence are investigated for the inviscid and viscous calculations.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.7-14
• /
• 2004

It is well known that preconditioning methods are efficient for convergence acceleration at compressible low Mach number flows. In this study, the original Euler equations and three preconditioners nondimensionalized differently are implemented in two dimensional inviscid bump flows using the 3rd order MUSCL and DADI schemes as flux discretization and time integration respectively. The multigrid and local time stepping methods are also used to accelerate the convergence. The test case indicates that a properly modified local preconditioning technique involving concepts of a global preconditioning one produces Mach number independent convergence. Besides, an asymptotic analysis for properties of preconditioning methods is added.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.88-94
• /
• 1997

Photographic lenses and an aspheric optical pickup-lens are designed by using damped least-squares(DLS) method. We start optimization with arbitrary initial damping factor. To improve the rate of convergence and the stability in optimization, we apply the special procedure that estimates numerical adequacy of derivative increments of variables to the DLS method. When the initial damping factor is almost equal to the median of series of eigenvalues, the convergence and the stability of the method significantly are improved. Optimized lenses have the performance of each target.

• Vending industry
• /
• v.3 no.2 s.10
• /
• pp.71-76
• /
• 2004

그간 관심의 초점이 되었던 성인인증장치의 그 구체적 범위를 지정하는 국민건강증진법시행규칙개정령안이 입법예고 되었다. 지난 2003년 7월 29일 청소년 금연을 위하여 성인인증담배자판기의 합법적인 설치를 인정하는 국민건강증진법이 개정된 이후, 보건복지부 건강정책과에서는 협회를 중심으로 한 산업계 의견을 수렴하여 구체적인 성인인증장치의 범위를 규정하는 국민건강증진법시행규칙 세부안을 준비해 왔다. 이번 공고안에 따르면 성인인증장치의 범위를 신분증 방식만이 아닌 신용카드 등 금용신용거래장치에 의한 방법까지를 포함해 기술의 다양성 측면을 반영했다. 금호 정책초점에서는 새롭게 공고된 국민건강증진법시행규칙의 세부 내용과 이번 입법이 미칠 시장영향에 대해 살펴보는 시간을 마련했다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.58-58
• /
• 2012

산소와 아연의 화합물인 산화아연은 UVA, UVB 산란효과가 있는 논케미컬 자외선 차단 성분으로 물, 알코올에는 녹지 않지만 산, 알칼리, 암모니아수 등에는 녹는다. 자외선을 방지하며 입자경은 500nm전후이다. 굴절률은1.9~2.0으로 내광성, 내건성, 내열성이 커서 햇빛이나 다른 자극으로 보호막을 형성하며 수렴, 방부, 항균작용을 한다. 이러한 특징을 띄는 금속산화물 산화아연을 내광성이 약한 p-aramid섬유에 코팅해 내광성 증진을 나타내려한다. 이에 따라 본 실험에서는 암모니아수와 Zinc acetate로부터 sol-gel 합성법에 따른 ZnO 합성 실험을 수행하였다. 반응물 농도에 따른 ZnO 입자의 형상과 입자 분포를 통해 결정크기를 알아보았다. 결과 분석을 위하여 X-ray 회절분석(XRD)를 이용해 ZnO입자의 결정성을 분석하였고, 패턴의 형상과 결정크기를 전계방출형 투과전자현미경(FE-TEM)을 통해 관찰하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.2
• /
• pp.9-17
• /
• 2002

For turbulent spray combustion flows a coupled numerical procedure was developed, This method was discretized by using generalized curvilinear coordinates to handle complex geometries. The preconditioning and eigenvalue rescaling techniques were employed to provide efficient convergences over a wide range of subsonic Mach numbers. The accuracy was validated by simulating the laminar cavity flow. The film cooling effect of a liquid rocket engine (KSR-III) were investigated by a spray combustion analysis. The film cooling showed a negative effect on the combustion efficiency. In the combustion chamber wall, the film cooling effect was revealed to be promoted by the production of fuel rich zone.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2C
• /
• pp.99-108
• /
• 2006

In this study a series of bench scale test are conducted to increase the undrained shear strength of clayey soils using by Electro-kinetic injection stabilization method. The sodium silicate was injected in anode reservoir and its concentration was changed with 500, 1000, 1500, 2000, 2500mM for configuration of applicability of Electro-kinetic injection stabilization method. Also, the treatment time and electric gradient was changed to acquire the optical influence factors. For increasing the shear strength to maximum values, the calcium chloride and aluminium hydroxide, which concentration was changed with 50, 250, 500, 750, 1000mM, were added at anode reservoir for 5 days after the treatment of sodium silicate in 5 days as the 2nd additives. The test of results in determination of sodium silicate concentration show that the undrained shear strength at each point had a tendency to converge into a constant value when the concentration of sodium silicate came to 1000mM and above. The maximum shear strength increasement was 800% compared with initial value. After a series of test, the electric gradient and treatment time for application of electric fielld were 1V/cm and 6 days. In case of 2nd additives test, the concentration for maximum shear strength is 250mM in all additives and the effects of shear strength improvement was developed approximately 20~30% in comparison to addition of single injection material.

• Korean Journal of Social Welfare
• /
• v.67 no.3
• /
• pp.151-180
• /
• 2015

This study aimed to develop a scale to measure physical health behaviors among social work clients using general services. The scale items were constructed based on literature review and FGI of social workers. Exploratory factor analysis and confirmative factor analysis affirmed the factor structure of Physical Health Behavior Scale with two sub-scales: Health Promotion Behavior Scale and Health Hindrance Behavior Scale. Promotion Scale had 7 factors and Hindrance Scale had 5 factors. Both sub-scales showed acceptable ranged goodness-of-fit for the model, and internal consistency test proved that the scale was reliable. The analyses of discriminant validity, convergent validity, and concurrent validity resulted significant validation. Based on those results, the developed Physical Health Behavior Scale were proved well-constructed, reliable and valid. The Scale will be utilized for both clients in general to check their own health related behaviors and social workers to adopt as a tool for assessment in order to perform an evidence based practice.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.363-372
• /
• 1993

An optimization technique with variable orthogonalization and SVD(singular value decomposition) is examined in a double-Gauss type photographic lens design and its convergence and stability are compared with ordinary least squares and DLS(damped least squares) method. It is known that there are close relationship between the stability of optimization and condition number of nomal equation, the ratio between maximum and minimum of eigenvalues. In this study, the stability is greatly improved by limiting the condition number, the SVD, as expeded. The case of DLS with small damping, orthogonalization and SVD shows the most rapid convergence and stability. It means that the unstability of DLS method with small damping is overcome by using the variable orthogonalization and SVD.