• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.63-74
• /
• 2012

In Korea, grouting has been mostly designed and constructed by experiences without expert knowledge and theoretical study. So there are a lot of problems related to the quality and safty of grouting. Therefor, in this paper the quality management skills and method were discussed through out by using the auto-grouting method and field test of grouting for the construction. Through the limit water injection test of the soil, it make the optimum injection pressure and injection speed of grouting, and through the lugeon test of the rock, it make assess the permeability of before and after grouting. In order to prevent the hydraulic fracture of soil and break away from the grouts if it apply four kinds of mode of grouting stop criteria, injection effects can be improved. From the above characteristcs designers evalute the fitness values of injection pressure(p), injection speed(q) and grouting penetration time(t). So far, to record and manage pressure(p) and speed(q) of grouting autographic devices such as intergation flow-meter usually record data in a roll of paper. Intergration flow-meter can record grouting flow quantity exactly, but the recorded pressures differ from the any basis such as intitial, intermediate and final point. Therefore, it has been argued that is a need of reliable method to describe the connection between the pressure recorded by an intergration flow-meter and the special properties of the grouting target ground. auto-grouting method can describe the reliable connection between the grouting pressure and the special properties of the grouting target ground. So, in this paper by using auto-grouting method, it is expected that to secure basis of quality control techniques construction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.1-11
• /
• 2007

Light is an environmental component inevitably regulating photosynthesis and photo-morphogenesis, which are involved in the plant growth and development. Studies were conducted at the International Rice Research Institute, Philippines in 2004 and 2005, with aims to investigate 1) morphological responses of rice plants to low radiation, 2) morphological alteration of shade-grown plants when exposed to high light intensity, and 3) photosynthetic responses of shade-grown rice plants. Reduction in solar radiation by 40% induced increases in the area on a single leaf basis, biomass partitioning to leaves, and chlorophyll meter readings but brought about retardation of tiller development and decrease in above-ground biomass production of rice varieties. When the shade-grown plants from two weeks of transplanting to panicle initiation were exposed to full solar radiation after panicle initiation, they demonstrated less increase in chlorophyll meter readings and more decrease in leaf nitrogen concentrations from panicle initiation to flowering than control plants that were grown under the ambient solar radiation for whole growth period after transplanting. Shade-grown rice plants exhibited lower carbon assimilation rates but higher internal $CO_2$ concentrations on a single leaf basis than control plants, when measurements for shade-grown rice plants were made under the shading treatments. But when the measurements for shade-grown plants were made under the full solar radiation, light-saturated carbon assimilation rates were similar to control plants. Response of photosynthetic rates to varying light intensities was not considerably different between shading treatments and control. Yield reduction was observed in the shading treatments from panicle initiation to flowering and from flowering to physiological maturity, mainly by less spikelets per panicle and poor grain filling, respectively.

• Proceedings of the Speleological Society Conference
• /
• 1995.09a
• /
• pp.39-44
• /
• 1995

$\bigcirc$ 동굴생물은 식물과 동물, 미생물로 크게 구분되지만 태양광선이 완전히 차단된 동굴내 환경에서는 동굴 동물들이 주종을 이루고 있다. $\bigcirc$ 동굴내의 동물에 관한 연구는 1966년 고씨동굴, 용담굴을 시발로 고수굴, 천동굴, 노동굴, 백룡글, 대이굴, 환선굴 등 강원도내에 분포하는 동굴 중 약 30% 정도는 동물을 포함한 생물상이 조사되었다. $\bigcirc$ 강원도의 동굴동물로서 확인된 것은 9강 30목 141종이며 강별로는 곤충강이 9목 50종 주형강이 4목 49종 갑각강이 6목 18종의 순으로 우세하고 목별로는 거미목이 15과 39종, 톡토기목이 7과 20종, 딱정벌레목이 8과 15종으로 우세한 편이다(남, 1987). $\bigcirc$ 동굴생물에 관한 연구는 육상생태계와 격리된 환경에서 생리, 생태적 적응을 통한 종의 분화나 유전, 진화문제를 추구하며 지하생태계와 육상생태계의 생물적인 유연관계 규명에 중요한 분야로 인정되며 아울러 독특한 특성을 지닌 동굴생물의 생존을 위한 방안과 노력이 일부동굴의 개방 및 개발에 앞서 더욱 구체적으로 모색되고 증대되어야 한다. $\bigcirc$ 동굴환경의 주요 특성은 첫째 햇빛에 차단되어 암흑상태이며, 둘째 내부습도가 높고 기온이나 수온의 년중변화가 심하지 않고, 셋째 먹이연쇄에 필수적인 영양공급원이 제한되어 있다. 따라서 광합성작용으로 성장하는 녹색식물은 태양광선이 유입되는 곳이나 인공조명시설 지역을 제외한 곳에서는 서식이 불가능하고 대형동물이나 초식동물은 생존이 어렵다. $\bigcirc$ 동굴내에는 환경에 적응하는 종들만이 서식할 수 있고 이들을 생태적 특성에 따라 세가지로 구분 할 수 있다. 환경적응 요인으로는 광도, 습도, 온도 영양공급원과 섭식장소, 수중생물의 경우는 특히 수온, 수량 영양원등이다.(중략). 본 연구의 접근방법으로는 ASRS의 개념적인 Reference Model을 수립하고 이 Reference Model에 대한 Formal Model로 DEVS(Discrete Event System Specification)을 이용하여 시스템을 Modeling하였다. 이의 Computer Simulation을 위하여 DEVS형식론 환경에서의 Simulation Language인 DEVSim ++ⓒ를 이용하여 시스템을 구현하였다.. 실형 결과로는 먼저 선형 상미분방정식의 예로 mass-damper-spring system, 비선형 상미분방정식의 예로는 van der Pol 방정식, 연립 상미분방정식의 예로는 mixing tank problem 등을 보였으며, 그의 공학에서 일어나는 여러 가지 문제들도 다루었다.화물에 대한 방어력이 증가되어 나타난 결과로 여겨지며, 또한 혈청중의 ALT, ALP 및 LDH활성을 유의성있게 감소시키므로서 감잎 phenolic compounds가 에탄올에 의한 간세포 손상에 대한 해독 및 보호작용이 있는 것으로 사료된다.반적으로 홍삼 제조시 내공의 발생은 제조공정에서 나타나는 경우가 많으며, 내백의 경우는 홍삼으로 가공되면서 발생하는 경우가 있고, 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W1]_{XO}$ ]$_{XO}$)로 그리고 [-wh] 의미의 겹의문사는 중복된 발은을 지닌 한 단어로 ([W]$_{XO}$

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.169-173
• /
• 1984

In order to determine the optimum harvesting time based on grain filling and physico-chemical qualities for malting, three cultivars were harvested at every five days from 30th day after heading date at two experimental sites in the southern part of Korea. Starch accumulation and kernel weight increment were remarkable until 45th day after heading, but negligible after that. Content of ash, crude protein and polyphenolics and ${\alpha}-amylase$ activity decreased with maturation of grains and reached to the lowest value at 45th day after heading date. Germinative energy and capacity were good enough for malting from 40th day after heading date. The optimum harvesting time were estimated at 45th day after heading date in the increment of starch accumulation and kernel weight. At this time matured and immatured kernels were in the ratio 93 : 7. However, it is estimated that early harvesting time was at 40th day after heading date.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2011

Magnetic properties at low-temperatures can diagnose the presence of certain magnetic minerals in rocks. At the Verwey transition temperature ($T_v$, ~105~120 K), magnetite transforms from monoclinic to cubic structure as the temperature increases. At the isotropic point ($T_i$, ~135 K), magnetocrystalline anisotropic constant of magnetite passes through zero (from negative to positive) as the temperature decreases so that its optimal remanence acquisition axis changes from [111] to [001]. A sharp remanence drop was observed at $T_v$ during warming of LTSIRM (low-temperature saturation isothermal remanent magnetization). For cooling of RTSIRM (room-temperature saturation isothermal remanent magnetization), the remanence decreased on passing $T_i$ and $T_v$. On warming of RTSIRM, remanence recovery becomes more prominent as the average grain size of magnetite increases. In summary, the SIRM memory decreases with increasing grain size of magnetite. A similar, but rather gradual, remanence transition occurs for natural samples due to contribution of cations other than Fe. As a non-destructive tool, low-temperature magnetic behavior is sensitive to unravel the magnetic remanence carriers in terrestrial rocks or meteorites.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.26-34
• /
• 2014

Highway construction is a combination of linear, repetitive, and highly equipment intensive operations. Various types of construction equipment are deployed to ensure undisrupted performance of construction, and thus productivity improvement and cost-saving can be achieved through well-thought-out planning. The selection of construction equipment is dependent upon construction sequence, site conditions, and construction methods. In the process of planning, management should consider various types of construction methods per each type of construction operation. Also, management should map out proper construction equipment operation plan that takes the construction duration and cost measures into consideration. However, limited availability of historic data from the similar types of operations has been a stumbling block to proper construction planning, making the operations performed based upon experience and intuition guided by rules-of-thumb. As a consequence, the planing phase rarely provided an adequate validity in the implementation phase. The researchers developed a process logic for each construction type that management can utilize from early phase of highway construction planning process. Moreover, derived the construction equipment combination optimized for efficiency by using the process simulation technique. The developed method is expected to be useful for the decision-making process that aims to evaluate efficiency of various process plans and to ensure optimal selection of construction equipment for highway construction projects.

• Korean Journal of Ecology and Environment
• /
• v.36 no.1 s.102
• /
• pp.57-65
• /
• 2003

The algal growth potential test (AGPT) bioassay were conducted to assess the water quality and fertility in the Chinyang Reservoir and the lower part of the Nam River from August 2000 to July 2001, The AGPT value of the Chinyang Reservoir ranged from 0 to 23.4 mg dw $1^{-1}$, while 79% of the algae cultivation have not grown. The AGPT value was in proportion to phosphorus concentration of the water, and it was less when chlorophyll-a was high. This value was higher in the middle and lower layers than in the upper layer, and in the inflow part where the water is shallower than in the lacustrine. The AGPT value has increased in the whole reservoir in August${\sim}$September when the water volume is high. In contrast, the AGPT value in the Nam River varied greatly compared to that of the reservoir, and ranged from 0 to 252.0 mg dw $1^{-1}$ and 65% of the algae cultivation have grown. The value was less than 10 mg dw $1^{-1}$ in the upstream, over the point where the treated wastewater discharged. It was 57 mg dw $1^{-1}$ on the average in the downstream, except in March and July when the discharged water influenced greatly, exceeding the hypertrophic condition. The result of AGPT shows the differences in the time and space on the reservoir and the streams. The AGPT value has increased in July${\sim}$September, and in December in the inflow part of the reservoir; in March and August${\sim}$December in the lower part; and in January, May, and November in the streams. AGPT is useful not only in defining the influence of the limiting nutrients on the algal growth, but also in evaluating the nutrients fertility in the inland water.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.301-306
• /
• 2020

The vertical garden is an environment where plants have many limitations in their growth. In particular, the upper and lower parts of the foundation are characterized by unbalanced moisture distribution. And although it may vary depending on the installation location of the light, generally the base of the light is not in desperate need for plants to grow due to shade. The purpose of this study was to identify the physical characteristics of the vertical garden based on Felt through experiments, classify the location characteristics of the media, and suggest the method of installing the water quantity water frequency, and lighting according to the location characteristics of the foundation. As a result, it was found to be most appropriate to use a 4mm base for the vertical garden and to have an irrigation of about 10 minutes once every 6 hours. In addition, it was found that in order to create a light condition for sufficient growth of plants, light bulbs should be installed at the upper and lower parts of the foundation. As a result of irrigation and lighting tests, the results of the above-mentioned plants need to be referred to in selecting plants that are introduced to vertical gardens, as the results show that the upper part of the foundation has a lower moisture rate and a stronger light than the lower part, and the lower part has a higher moisture rate and a weaker light than the upper part. In the future, we would like to present more accurate methods of selecting and maintaining plants by conducting plant experiments using the underlying characteristics found in this study.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.51-64
• /
• 2014

Small and medium Enterprises (SMEs), which have a manufacturing method of small quantity batch production produce goods using a general-purpose equipment and attached auxiliary tools. Many previous studies have focused on finding the effective resource allocations for improving the firms' productivity. It is very important for SMEs to keep costs low in assigning jobs to each resource, because they should meet the future uncertain demand of consumers under the limited budget. Using the concept of salvage cost, this paper proposes how to effectively allocate the tasks to main resources in the production process. The salvage cost is defined that purchasing cost minus decrease in value by workload, the method considering this is expected to reduce total purchasing costs during business period. To validate the effect of the proposed method, we proceed the real case study targeting on S company, PCB manufacturer to compare purchase amounts and its costs between the allocation proposed based salvage cost and current allocation method of current S company. As a results, In short-term (3 year) business period, salvage allocation have remarkable superior outcome to existing method, but gradually have cancelled out the effects in long-term (8 year) plans. Unlike the cycle allocation method, there exists the idle-equipments in allocation based salvage value. we additionally analyze the profits with respect to rental strategy of them during business period.

• Tunnel and Underground Space
• /
• v.19 no.5
• /
• pp.373-387
• /
• 2009

Considering the current construction technology and research status of deep repository tunnels for radioactive waste disposal, it is inevitable to use cementitious materials in spite of serious concern about their long-term environmental stability. Thus, it is an emerging task to develop low pH cementitious materials. This study reviews the state of the technology on low pH cements developed in Sweden, Switzerland, France, and Japan as well as in Finland which is constructing a real deep repository site for high-level radioactive waste disposal. Considering the physical and chemical stability of bentonite which acts as a buffer material, a low pH cement limits to $pH{\leq}11$ and pozzolan-type admixtures are used to lower the pH of cement. To attain this pH requirement, silica fume, which is one of the most promising admixtures, should occupy at least 40 wt% of total dry materials in cement and the Ca/Si ratio should be maintained below 0.8 in cement. Additionally, selective super-plasticizer needs to be used because a high amount of water is demanded from the use of a large amount of silica fume.