• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.403-412
• /
• 1993

By making use of the microprocessor technology, instrumentation system becomes intelligent. In this study a programmable smart transmitter is designed and applied to the nuclear engineering measurements. In order to apply the smart transmitter technology to nuclear engineering measurements, the digital time delay compensation function and water level change detection function are developed and applied in this work. The time compensation function compensates effectively the time delay of the measured signal, but it is found that the characteristics of the compensation function should be considered through its application. It is also found that the water level change detection function reduces the detection time to about 7 seconds by the signal processing which has the time constant of over 250 seconds and which has the heavy noise.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.59-62
• /
• 2010

디지털 기술의 발달로 인해 세계 각국에서 지상파 DTV 방송망을 핵심인프라로 활용하기 위한 노력이 지속되고 있다. 하지만 국내 지상파 DTV 표준인 ATSC방식은 주파수 이용관점에서 효율적이지 못한 단점을 가지고 있다. 이러한 단점을 해결하기 위해 그 동안 동일채널 중계기술이 많이 연구되어 왔다. 그러나 동일채널간섭으로 인한 신호품질 저하, 긴 처리시간, 송출전력 제한 등의 제약조건으로 인해 실제 방송망에서는 동일채널 중계기술이 활용되지 못하고 있는 실정이다. 이에 본 논문에서는 DAB용 간섭제거 기반 동일채널 중계기를 ATSC 시스템에 적용하였다. 제안하는 동일채널 중계기는 타이밍 옵셋 보상을 위한 위상 전 왜곡기법, 파일럿 성분 추정 및 제거를 위한 직류 제거기, 송/수신신호 간의 상관도를 기반으로 궤환신호의 지연시간을 추정하는 기법이 적용되었으며, 전산 모의실험을 통해 그 성능을 확인하였다. 전산 모의실험을 통해 주 송신신호보다 간섭신호가 큰 환경에서 제안한 동일채널 중계기의 간섭제거 능력을 확인하였고, 이에 따라 동일채널 중계기의 송출능력을 개선하는 동시에 짧은 처리 지연시간 및 양호한 신호품질을 얻을 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.313-316
• /
• 2016

현행 수화방송서비스는 방송영상 화면위에 수화영상을 덧씌우는 방식으로 송출하기 때문에 수화영상의 크기가 작고 수화 영상을 제거하거나 크기 위치 조정이 불가능하여 청각장애인의 TV 시청에 불편함을 초래하고 있다. 청각장애인의 방송접근권 확대와 일반시청자의 TV 시청환경 제고를 위해 스마트 수화방송서비스는 방송 인터넷 융합 하이브리드 방식으로 방송영상과 수화영상을 방송망과 인터넷망으로 각각 송출하고 TV수신기가 두 영상의 동기화를 처리하고 앱을 통해 수화영상의 크기, 위치 조정 및 제거 서비스를 제공한다. 본 논문에서는 방송 인터넷 융합 하이브리드 방식인 스마트 수화방송서비스의 표준 기술 및 동기화 방식을 소개하고 스마트 수화방송 시험환경 및 동기화 지연시간 측정 결과를 소개한다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.887-888
• /
• 2008

본 논문은 여러 음향신호의 도달각에 기반한 실내측 위성능을 분석한다. 도달각 측정을 위해 송출전력이 같은 총성, 벨소리, 그리고 의사충격음을 사용하였다. 음향 신호는 약 32 평방미터의 실험실에서 한 개의 음원 스피커를 통해 송출되고, 두 쌍의 서로 동기가 맞는 배열 마이크를 통해 수신된다. 수신된 음향신호로부터 한 마이크 쌍 사이의 도달지연시간차가 측정되고, 이로부터 도달각이 산출된다. 끝으로, 음원 스피커의 최종 위치는 도달각의 교점으로 결정된다. 본 논문은 설치한 실험환경에서의 참 도달각과 측정 도달각의 평균절대오차와 측위오차의 상보누적분포를 보이고, 이에 대한 성능특성을 분석한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.273-276
• /
• 2021

기존의 중계 시스템은 유선 기반으로 방송 중계차와 케이블 등이 필요하여 시간과 비용, 장소의 제약과 같은 여러 한계점을 가지고 있었다. 하지만 무선 중계 기술의 발전으로 무선 카메라만 있으면 긴급재난 현장이나 중계차가 들어갈 수 없는 지역에서도 중계가 가능하게 되면서 중계방송의 제한 범위가 좁아지고 있다. 따라서 본 논문에서는 시간과 장소의 제약 없이 방송을 송출할 수 있는 5G 무선 중계 시스템을 분석한다. 분석한 시스템은 5G 모뎀이 장착된 MNG 장비를 이용해 UHD와 4K 신호를 무선으로 처리하여 초저지연·초고화질로 송출한다. 또한 현존하는 멀티뷰 기술을 접목시켜 시청자들이 원하는 서비스를 제공한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.115-125
• /
• 2007

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke marine diesel engine is of great economic importance. In Korea, a motor-driven cylinder lubricator for a large two-stroke marine diesel engine manufactured by $W{\ddot{a}}rtsil{\ddot{a}}$ Switzerland Co., Ltd. was first developed by authors through the joint research of industry-university in 2002. The characteristic of the developed product is that can control automatically the oil feed rate to a load fluctuation by the motor drive and the offset cam. The performance of the product is not also inferior to the conventional one. For manufacturing the reliable and useful products, however, it is necessary to investigate further characteristics and improve the performance of a cylinder lubricator. In this study, the effect of quill with and without accumulator on maximum discharge pressure, delivery delay duration and oil feed rate relative to motor revolution speed using plunger stroke as a parameter is experimentally investigated by using the developed cylinder lubricator. It is found that the maximum discharge pressure with accumulator is higher than that of no accumulator as plunger stroke and motor revolution speed are elevated, and the delivery delay duration with accumulator is shorter than that of no accumulator as plunger stroke and motor revolution speed are increased. Also, oil feed rate with accumulator is less than that of no accumulator except for a plunger stroke of 2 mm as plunger stroke and motor revolution speed are raised.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.261-267
• /
• 2016

In this paper, Method for the phase distortion compensation timing offset and DC eliminator for the pilot component estimation and removal, transmitted and received signal correlation in the delay scheme DAB interference cancellation based on the same channel for using for estimating the feedback signal based on a between for removal for the timing offset compensation It proposes a repeater. This was applied to the ATSC system. The on-channel repeater of the proposed interference cancellation based on the interference removing capability is improved in interference signal is 20dB greater than the primary transmission signal environment via the return channel estimation and improve performance RFP. Accordingly, it was confirmed by simulation that good signal is sent out with the improvement of the ability of the repeater.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.892-901
• /
• 2001

Despite of many advantages over conventional radio paths, application of the Meteor Burst Path in commercial communication system is so far limited to a few extent because of its low duty rate, which is, less than several percent at best. In order to get through maximum number of data bits during the short interval of each burst, which normally lives a fractions of a second, a sophisticated communication protocol is called for. In this paper, author introduces a communication protocol which can effectively locate and fetch burst signal by sending out periodic detection signal from master station and, with minimal delay, switch over to transmission states so as to put as many data bits through the detected burst as the burst length permits. By analyzing time period required for each transaction steps, the author derives optimal packet length for various bursts which assures to get a message string through in minimum delay. According to the analysis, the author proposes a protocol including a routine which automatically accesses average length of bursts at each environment and automatically adapt length of data packet so as to maximize data throughput under Riven burst conditions.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.15-20
• /
• 2016

In this paper, we developed the hardware GPS signal generator for generating a GPS L1 meaconing signal with Live GPS signal signals and analyzed the performance of meaconing signal generator thorough the experiment. Deception of the signal, such as a re-broadcast, it is an object of the user to provide false information so as not to receive location information and accurate time. The signal just rebroadcast has the features that can be easily deceive the receiver via a delay of no received signal to the signal processing through an antenna. In this paper, the hardware for generating a signal only these rebroadcast designed and manufactured, by re-sending the received Live GPS signals, to confirm the effect of the receiver. The maximum delay time is possible up to about 2.6msec, also, has been successfully tested to be moved to the position of re-broadcasting based on maturity antenna the position of the receiver through a spaced antenna.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.475-480
• /
• 2012

In order to establish eLoran (enhanced Long Range Navigation) system, it needs the advancement of receiver, transmitter, data channel addition for Loran information, differential Loran sites for compensating Loran-c signal and ASFs (Additional Secondary Factors) database, etc. In addition, the precise synchronization of transmitting station to the UTC (Coordinated Universal Time) is essential if Loran delivers the high absolute accuracy of navigation demanded for maritime harbor entrance. For better timing synchronization to the UTC among transmitting stations, it is necessary to measure and monitor the transmission delay of the station, and the correction information of the transmitting station should be provided to the user's receivers. In this paper we presented the measurement method of absolute delay of Pohang Loran transmitting station and developed a time delay measurement system and a phase monitoring system for Loran station. We achieved -2.23 us as a result of the absolute phase delay of Pohang station and the drift of Loran pulse of the station was measured about 0.3 us for a month period. Therefore it is necessary to measure the delay offset of transmitting station and to compensate the drift of the Loran signal for the high accuracy application of PNT (Positioning, Navigation and Timing).