• Title/Summary/Keyword: 속도 루프

Search Result 248, Processing Time 0.035 seconds

The Circuit Design and Analysis of the Digital Delay-Lock Loop in GPS Receiver System (GPS 수신 시스템에서 디지탈 지연동기 루프 회로 설계 및 분석)

  • 금홍식;정은택;이상곤;권태환;유흥균
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.8
    • /
    • pp.1464-1474
    • /
    • 1994
  • GPS(Global Positioning System)is a satellite-based navigation system that we can survey where we are, anywhere and anytime. In this paper, delay-lock loop of the receiver which detects the navigation data is theoretically analyzed, and designed using the digital logic circuit. Also logic operations for the synchronization are analyzed. The designed system consists of the correlator which correlates the received C/A code and the generated C/A code in the receiver, the C/A code generator which generates C/A code of selected satellite, and the direct digital clock syntheizer which generates the clock of the C/A code generator to control the C/A code phase and clock rate. From the analyses results of the proposed digital delay-lock loop system, the system has the detection propertied over 90% when its input signal power is above-113.98dB. The influence of input signal variation of digital delay loop, which is the input of A/D converter, is investigated and the performance is analyzed with the variation of threshold level via the computer simulation. The logic simulation results show that the designed system detects precisely the GPS navigation data.

  • PDF

A Convergence Study on the Flow near Vehicle by the Configuration of Roof Box (루프 박스의 형상별 차량 주위에서의 유동에 관한 융합 연구)

  • Oh, Bum-Suk;Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.10 no.10
    • /
    • pp.99-105
    • /
    • 2019
  • In this study, the flow analysis around vehicle was carried out on various kinds of roof box models installed at the roof of vehicle. Through the analysis of fluid flow and pressure, we investigated which model was more suitable for driving. The four types of models were designed with their respective shapes of models 1, ${\beta}$, ${\delta}$ and ${\gamma}$, and the driving speed of car was set as 20 m/s. It was confirmed that the pressure for model ${\beta}$ became greatest compared to other models. And model ${\delta}$ has the lowest pressure among all models of roof boxes by installing a canoe with the structure for cable type. As the design data with the durability of roof box obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the car body at real life.

The Effects of Korean Lexical Characteristics on Memory Span (한국어 어휘특성들이 기억폭에 미치는 효과)

  • Park Tae-Jin;Park Sun-Hee;Kim Tae-Ho
    • Korean Journal of Cognitive Science
    • /
    • v.17 no.1
    • /
    • pp.15-27
    • /
    • 2006
  • The effects of the number of Hangul syllable, the nunber/location of batchim in a Hangul word, and compound/noncompound Hangul word on memory span were examined. The results were that (1) the more syllables a word had, the lower us memory span was, (2) the more batchims a two-syllable word had, the lower its memory span was (Korean batchim effect on memory span), (3) noncompound word had higher memory span than compound word. The reading speed of above mentioned words was measured and the results were that (1) the more syllables a word had, the slower its reading speed was, (2) but the reading speed of a two-syllable word was forest when it had a batchim on second syllable than when it had no batchim or had a batchim on first syllable or batchims on both syllables (Korean ending batchim effect on reading speed), (3) noncompound word was read faster thu compound word. Korean ending batchim effect on reading speed was not compatible with the explanation by articulatory loop bur compatible with the explanation by visual cache where the orthographic information was represented. The results suggest that memory span was influenced nor only by phonological information but also by orthographic information.

  • PDF

A Comparison Between the Tape Switch Sensor and the Video Images Frame Analysis Method on the Speed Measurement of Vehicle (차량 속도 측정의 실무적용을 위한 테이프스위치 센서 방식과 영상 프레임 분석방법의 비교연구)

  • Kim Man-Bae;Hyun Cheol-Seung;Yoo Sung-Jun;Hong You-Sik
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.9 s.351
    • /
    • pp.120-127
    • /
    • 2006
  • In Korea the vehicle enforcement system(VES) detects speeding vehicle using two inductive loop detectors. And the speed reliability of theirs are evaluated through the analysis of image frame which is captured from video camera. This method is validated to evaluate VES on Korea Laboratory Accreditation Scheme(KOLAS) but it needs much time and expense for the analysis of image frame. Because the number of VES are increasing rapidly, the requirement of new evaluation method is necessary. On this paper, the tape switch sensor as a substitution of existing method was introduced and its application on the site are discussed. On the site test we compared the tape switch sensor on the speed measurement of vehicle with the video image frame. As a result we have founded that the tape switch sensor is evaluated to be feasible system on site in respect to measure the overspeed vehicle.

Position Control of Arago's Pendulum System by using Kalman Filter (칼만필터를 이용한 아라고 진자 시스템의 위치제어)

  • Park, Tae-Dong;Youn, Su-Jin;Park, Ki-Heon
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1765-1766
    • /
    • 2008
  • 본 논문에서는, 전동기를 이용하는 위치제어 시스템을 이용하여, 이너루프 제어기 유무에 따라 시간 응답 특성 개선 효과에 대하여 실험을 통해 검증하고자 한다. 실험 플랜트로서, 전동기의 속도에 따라 진자의 위치를 제어하는 다중 안정도를 가지고 비선형 시스템인 아라고 진자 시스템을 이용한다. 이 시스템은 속도 정보를 알 수 있는 측정 장치가 없는데, 칼만필터로 전동기의 속도를 추정하고 속도 제어기를 설계하도록 한다. 또한, 선형 시스템을 고려하기 위하여 안정영역 동작점인 진자의 각도가 지면으로 부터 45$^{\circ}$인 선형화 모델을 이용한다.

  • PDF

Design of a Low EMI Data Transmitter for In-Vehicle Communications (낮은 전자기 간섭 특성을 가진 차내 통신을 위한 데이터 송신기 설계)

  • Jun-Young Park;Hyun-Kyu Jeon;Won-Young Lee
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.18 no.4
    • /
    • pp.571-578
    • /
    • 2023
  • In this paper, we propose a low EMI data transmitter employing a delay-locked loop for vehicles. For the low EMI characteristic, the transmitter has been designed to have low slew rate and employs the delay-locked loop to correct the amount of change in the slew rate due to process variations. According to simulation results, the proposed transmitter which the delay-locked loop has smaller slew rate change as compared to the conventional transmitter. The proposed circuit has been designed with a 65nm process technology and the data rate is 20Mbps with a supply voltage of 1.1V. As compared to a conventional transmitter, the proposed transmitter shows that variations of the slew rate become 53.6% lower in a fast condition and 13.07% lower in a slow condition.

Implementation and Performance Evaluation of a Precision Localizing Device for Hyperloop Pods Driving at Ulta-High Speeds (초고속주행 하이퍼루프 포드의 정밀 위치측정 장치 구현 및 성능평가)

  • Ok, Min-Hwan;Choi, Su-Yong;Choe, Jae-Heon;Lee, Kwan-Sup
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.13 no.5
    • /
    • pp.443-451
    • /
    • 2020
  • A futuristic locomotion system called Hyperloop is projected for driving at ulta-high speed, levitated in the tube. In hyperloop localization of pods on the linear synchronous motor is essential for pod driving. precision localization is required for acceleration and deceleration of pods driving at speed above 1,000km/h, and also required for adjusting the pod speed driving at this very-high speed to maintain inter-vehicle distance. In this work, a new scale of localization is challenged by modified laser surface velocimeter. In acceleration the speed of a virtual pod is calculated along its displacement measured by laser reflection. Under the requirement of precise localization of the pod driving at ultra-high speed, a displacement measurement device, which detects the difference in reflections from tiles passing by the pod, is developed and evaluated through performance test. Tests of pod speeds below 500km/h have showed exact localization results of the precision in centimeters, and tests of pod speeds above 500km/h have showed localization with very low error rates under 0.1%. For the measurement above 500km/h, future works would pursue the error rate converges to zero.

A New Speed Control Algorithm for SRM Without a Shaft Position Sensor (위치센서를 사용하지 않는 SRM에 대한 새로운 속도제어 알고리즘)

  • 김태한;하인중;안종보;김상권
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.4
    • /
    • pp.32-37
    • /
    • 1999
  • 본 논문에서는 위치센서 없는 Switched reluctance motor에 대해 저가로 구현가능한 새로운 속도제어 알고리즘을 제안한다. 대부분의 기존의 연구결과들은 상전환을 위한 점호각을 정확히 검출하는 것을 목표로 하였다. 그러나, 점호각 검출에서의 오차는 고속운전시 발생토크맥동과 효율의 저하, 심지어 탈조를 야기해왔다. 속도제어를 위해 제안하는 방법은 잘 알려진 phase locked servo(PLS) 속도제어루프에 ΔΣPLL과 유사한 점호각추정기를 위상검출기로 사용하는 것이다. 그것에 의하여, 제안한 알고리즘은 점호각검출오차와 발생토크맥동을 줄일 수 있다. 따라서, 저가로 고속운전에서의 속도오차를 감소시킬 수 있다.

  • PDF

Operating Range Expansion of a Closed-Loop Stepping Motor by Optimal Lead Angle Control (초적 Lead Angle 제어에 의한 폐루프 스테핑 전동기의 운전영역 확대)

  • 우광준;이종언;이현창
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.9 no.3
    • /
    • pp.80-87
    • /
    • 1995
  • In this paper, we design the microcontroller-based optimal lead angle control system on the basis of the presented maximum average torque formula of the permanent-type stepping motor with respect to the inductance. We confirm that optimal lead angle enlarges the operating range twice as much and increases the torque over all of the operating range in the case of presented formula as well as experimental results.

  • PDF

Example Development of Medical Equipment Applying Power Electronics Technique (전력전자 기술을 응용한 의료장비 개발 사례)

  • 고종선;이태훈;김영일;김규겸;박병림
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.7 no.6
    • /
    • pp.524-530
    • /
    • 2002
  • A control of the body posture and movement is maintained by the vestibular system, vision, and proprioceptors. Afferent signals from those receptors are transmitted to the vestibular nuclear complex, and the efferent signals from the vestibular nuclear complex control the eye movement and skeletal muscle contract. The postural disturbance caused by loss of the vestibular function results in nausea, vomiting, vertigo and loss of craving for life. The purpose of this study is to develop a off-vertical rotatory system for evaluating the function of semicircular canals and otolith organs, selectively, and visual stimulation system for- stimulation with horizontal, vortical and 3D patterns. The Off-vortical axis rotator is composed of a comportable chair, a DC servo-motor with reducer and a tilting table controlled by PMSM. And a double feedback loop system containing a velocity feedback loop and a position feedback loop is applied to the servo controlled rotatory chair system. Horizontal, vertical, and 3D patterns of the visual stimulation for applying head mounted display are developed. And wireless portable systems for optokinetic stimulation and recording system of the eye movement is also constructed. The gain, phase, and symmetry is obtained from analysis of the eye movement induced by vestibular and visual stimulation. Detailed data were described.