• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.374-377
• /
• 2007

본 보고서는 소형 로켓 제작에 앞서 행해지는 설계 단계를 기술하였다. 각 요구 조건에 맞춰 사용되어질 추력, 추진제 특성, mass distribution, 동체 형상 설계, Motor 설계에 대해 다뤘다. 로켓 설계에 있어서 가장 중요한 추진제 선정과 노즐형상 설계를 중점적으로 다루었으며, 차후 본 과정에 의하여 소형로켓을 제작하겠다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.491-494
• /
• 2005

This paper describes the fundamental research of hybrid-propellant rocket system focusing the flight. The performance of the hybrid-propellant rocket system (using the background of lab-scale tests) for a small-scale launch vehicle could have been validated by static thrust tests and flight tests. Based on this system, it was found that hybrid rocket propulsion system was available in an application to a launch vehicle system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.820-824
• /
• 2010

The purpose of this study is to develop basic technology of hybrid rocket vehicle by constructed and launched. This small hybrid rocket using HDPE/LN2O and Aluminium steel for its body (weight : 12.5 kg, diameter : 114 mm, height : 1.8 m) was designed. The fuel grain and injector were designed for 50 kgf thrust and burning time 2.5 sec. This rocket was loaded the data acquisition device for obtaining data of pressure and velocity during its flying and equiped an automatic ejector system using spring/motor and timer to collect the rocket more safely after launching. It was launched successfully, but found some problem that the rocket's weight was heavier than expected and the thrust was not enough to reach the designed altitude and analyzed its flight path way.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.365-369
• /
• 2007

The solid rocket interacts circumscriptively in terms of is many more than liquid rocket. It is uncontrollable than liquid rocket because all part of combustion is decided such as Mixture ratio of propellant, burning time and area. However, production cost is cheap and because authoritativeness security can be easy and enlarge the early speed that follow thrust-to-weight ratio, it is used comprehensively by small size rocket. Considered about nozzle cooling to control phenomenon that burn by thermal conduction in interior wall of nozzle that follow in thrust increase of solid rocket and erosion phenomenon by combustion gas of high speed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.349-352
• /
• 2008

This work is to observe combustion characteristics depending on variation of the solid propellent grain configuration. The LRE (Liquid Rocket Engine) enables adjusting the thrust by controling the required fuel mass glow, but the SRM(Solid Rocket Motor)is not easy to adjust th thrust due to the difficulty of th fuel flow control by its combustion behavior even its configuration is simple. This difficulty can be partly solved by changing th size or the configuration of the propellant grain. In this study a proper grain configuration of a small solid rocket is selected through both the theoretical design and the experimental tests.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.393-397
• /
• 2007

The aim of this study is to investigate critical load, which can influence on flight path of a small slender body rocket, due to external forces such as thrust, drag and weight. The critical load was firstly obtained from Euler column equation, and compared with analysis results using Finite Element Method to evaluate the theoretical critical load.

• Journal of the KSME
• /
• v.56 no.9
• /
• pp.44-48
• /
• 2016

실제 크기의 로켓엔진은 수많은 예산이 소요되기 때문에 새롭게 설계된 엔진에 대하여 비행모델의 제작 및 실험연구는 예산과 위험성 때문에 매우 제한적으로 시행된다. 따라서 비행모델의 설계를 확정하기 위한 개발단계에서는 실제 크기의 로켓엔진의 특성을 나타낼 수 있는 소형 액체로켓을 제작하여 시험평가를 수행하게 된다. 이 글에서는 이러한 축소형 연소기 관련 연구동향을 알아보고자 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2015

A high altitude test facility which includes supersonic diffuser and ejector has been developed to simulate atmospheric pressure at 25 km using a 500 N class small scale liquid rocket engine. Also high altitude simulation test for the small scale liquid rocket engine was performed to verify the facility's performance. The experimental facility consists of high altitude simulation device, propellants supply system and coolant supply system. Low pressure condition corresponding to about 27 km(0.021 bar) altitude atmosphere was successfully simulated and a small scale liquid rocket engine thrust level was confirmed at the simulated condition by the high altitude test facility verification test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.189-192
• /
• 2004

Test Facility for hot firing test of small size liquid rocket engine has been developed to research the cooing characteristics of kerosene for cylinder part especially. Propellants for the tests are kerosene and liquid oxygen as fuel and oxidizer respectively and they are fed by gaseous nitrogen. The engine components used hot firing test except for cylinder are cooled by tap-water. Valves for supply of propellants and coolants are controlled by pneumatically. System control and data recording are conducted automatically.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.321-324
• /
• 2011

A computational analysis of nozzle flow characteristics and plume structure using Reynolds-averaged Navier-Stokes equations with $k-{\omega}$ SST turbulence model was conducted to examine performance of the supersonic nozzle employed in a small liquid-rocket engine for ground firing test. Computed results and experimental outcome of 2-D converging-diverging nozzle flow were compared for verifying the computational capability as well as the turbulence model validity. Numerical computations of 2-D axisymmetric nozzle flow was carried out with the selected model. As a result, flow separation with backflow appeared around the nozzle exit. This investigation was reported as a background data for the optimal nozzle design of small liquid-propellant rocket engine for ground test.