• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.48-53
• /
• 1995

A considerable number of methods are available for predicting traffic noise levels of road networks where sound is freely propagating. But surrounding buildings reflect back sound to the road and sound energy is increased by these reflectors. Therefore, this study was focussed on the establishment of the prediction method of road traffic noise under reflective conditions. This prediction method was developed by establishing prediction formulas of noise level such as $L_{10},\;L_{50},\;L_{90}\;and\;L_{eq}$. The sound energy density was employed to establish prediction formulas in terms of independent variables. The validity of the proposed prediction formulas was been confirmed by applying them to actually measured parameters of road traffic noise and noise level data. On the whole, the agreement between measured and predicted noise levels appeared to be satisfactory. The conclusion might be reached that the method developed in this study could be used to predict road traffic noise under reflective conditions.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.99-105
• /
• 2001

도로교통소음은 많은 지역에 산재해 있으며 특히 주도로변에 거주하는 사람들에게 환경과 관련하여 매우 중요하다. 도로교통으로부터 소음수준을 계산하는데 몇가지 다른 방법들이 이용되고 있다. 이 방법들은 계산방법과 그래프식 그리고 컴퓨터 모델링 기술 등이다. 교통과 교통소음의 영향으로부터 소음을 계산하는 간단한 기술의 예측방법은 여기에 나타내었다. 이 TNS (traffic Noise Screening) 방법은 서로 다른 도로유형에 대한 일련의 도로교통소음레벨의 예측그래프로 전개된 것이다. 이 그래프는 Federal Highway Administration (FHWA) STAMINA 2.0을 이용하여 다양한 시나리오에 대한 소음 예측모델을 계산한 결과를 기초하였다. TNS에 도로의 기하학적 형태, 교통량 주행속도 그리고 도로중앙선의 거리등의 데이터를 입력시킨다. TNS 그래프는 소음영향과 연관된 교통소음예측에서 사용하는 경우 교통소음레벨의 계산을 쉽게 한다. 이 TNS 방법은 STAMINA 2.0과 같은 상세 모델링을 대신하지는 못하지만 상세 모델을 필요로 할 때 도움을 주는 도구이다 만약 소음계산들이 중요하거나 또는 시나리오가 보다 복잡하고 부가된다면 보다 상세한 모델링이 수행되어져 스크린 결과들이 나타난다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1143-1151
• /
• 2013

Reasonable methods are needed to predict the noise level of new/existing roads and to select means of noise reduction. In this study, the noise reduction effects of both soundproof walls and quiet pavements were predicted. The noise reduction effects of quiet pavements were predicted by measurement data obtained using the CPX method in test pavements. The noise reduction effect was predicted by KHTN program when applied to soundproof walls and quiet pavement. As a result, the predicted noise level was similar to the measured one. The design method was suggested by an economic analysis using noise benefit of predicted noise reduction. The research suggests that the optimum alternative has to be determined using noise prediction method and life-cycle cost analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.703-707
• /
• 2002

This paper proposes new method for predicting sound power emitted from the control valve and piping system. The sound power level measurement method using the reverberation chamber is much easy to apply in the field compared to the method using the anechoic chamber. Measured sound power was used to determine the coefficients of the equation predicting sound power level. The noise prediction equation was developed at relative flow coefficient, 0.11. The sound power level predicted is in good agreement with the measured value. Proposed method can be used to express the noise characteristics of the control valves.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.844-845
• /
• 2014

최근 상용 소음 예측프로그램은 현황분석, 방음대책 수립 및 다양한 변수 변화에 따른 소음 예측 등 다양한 목적으로 활용되고 있다. 대부분의 소음 예측프로그램 사용자들은 상용 프로그램이 제공하는 초기 설정을 그대로 사용하고 있지만, 각 상용 프로그램의 초기 설정을 정확히 확인하는 사용자는 많지 않다. 본 연구는 국내에서 사용되는 상용 소음 예측프로그램의 초기 설정을 확인해 보고, 사용자의 프로젝트에 적당한 초기 설정의 변경 방법에 대한 정보를 제공하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.856-857
• /
• 2014

국내에서 이용되는 예측모델은 국립환경과학원식, 도로공사의 HW-NOISE, KHTN, 소음지도에 이용되는 외국의 RLS90, NMPB 등이 있다. 이러한 예측모델은 예측 방법 및 표현에 따라 예측식 2D(국립환경과학원식, HW-NOISE)와 3D로 예측(KHTN, RLS90, NMPB 등)으로 구분할 수 있다. 본 연구는 도로 주변 공동주택에서의 소음실측 및 예측식별 예측값을 통하여 예측식의 오차 및 오차의 원인을 분석하고 예측식의 적용방법에 대하여 고찰하였다.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.105-113
• /
• 2018

The modeling of noise mapping and the evaluation of noise pollution based on the exposed population were frequently used as an indicator of environmental noise assessment to overcome the limitations of field survey and Tele-Monitoring System. Results from these methods were highly influenced by the setting of noise source, input data of prediction factors and analytical methods of predictive values. The population exposed to noise were estimated as M1-1>M2-1>Base>M2-2>M1-2 in both areas. The highest noise setting methods(M1-1, M1-2) were overestimated, being compared with the Base method.

• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.14-22
• /
• 2000

The estimation of proper prediction method and the alteration of transformation method of environmental regulation standard were carried out by measuring blasting noise in construction field. The correlation of scaled distance with sound pressure level were better than with sound level, but it was proved to be difficult to control blasting noise because the correlation factor was too 1ow. three methods to transform sound pressure levee to sound level were examined. The method is the transformation by correlation equation of sound pressure level and sound level which are measured at the same time, and simplified transformation of A-weighting network corresponding to dominant frequency, and the transformation of sound pressure level by FFT. There were many errors to transform. The best effective method is the transformation using correlation equation of sound pressure level and sound level which are measured at the same time.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1
• /
• pp.57-62
• /
• 1994

In order to establish a prediction method for road traffic noise generated from actual traffic flow, a new approach is proposed for practical use. One block in urban road is regarded as one box in this study. This prediction method is able to treat any kind of road traffic noise generated from one block. The validity of the proposed prediction method has been experimentally confirmed by applying it to actually observed road traffic noise data. The correlation between observed and predicted noise level is good.

• Journal of Environmental Impact Assessment
• /
• v.25 no.3
• /
• pp.175-189
• /
• 2016

The guideline for railway noise mapping is notificated in the administration law for noise/vibration which is announced by the ministry of environment, Korea. Here input parameters for the railway sound sources are proposed for each prediction models. In case of the application of the vehicle characteristics it is suggested to choose "0(%)" for the disc brake parameter. However new trains have been in revenue service since the announcement of the guideline, an investigation of the effect of the input parameters of the foreign railway prediction models on the prediction results of korean railway systems are needed. In this paper the sound prediction results are analyzed with a focus on the input parameters such as disc brake percentage, rail roughness, rail joints. Schall03 is used for the railway noise prediction which has been using most frequently in Korea. The results are shown and discussed.