• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.462-466
• /
• 2010

하천을 횡단하며 유속을 측정하는 ADCP를 유속면적법과 같이 정해진 측선에 정지시켜 연직 유속을 측정하고 이를 단면적과 곱하여 유량을 산정하는 방법이 ADCP 정지측정법(Stationary Method)이다. 이 방법은 이미 괴산댐 하류에 적용되어 정지측정법 측정유량이 댐방류량 대비 평균 4%의 상대오차를 보여 효율성이 입증되었다. 본 연구에서는 일반 자연하천인 임진강 적성지점에 정지측정법을 적용하여 넓은 범위의 수위, 유량 변화에 대한 적용 가능성을 점검하였다. 또한 홍수기 널리 사용되는 측정방법인 부자법의 검증 수단으로서 적용 여부를 검토하였다. 2009년 7월부터 8월까지 총 26회 실시한 정지측정법은 1,046~9,663 $m^3/s$의 측정 유량 범위를 보였다. 측정기간 동안 단면평균 유속은 1.3~3.0m/s였으며, 측정 최대유속은 4.0m/s였다. 측정 소요시간은 23~46분으로 평균 35분 소요되었다. 같은 지점에서 실시한 봉부자법 측정이 평균 29분 소요한 것과 큰 차이가 없었다. ADCP를 이용한 정지측정법은 제조사에서 제공하는 전용 프로그램으로 측정과 동시에 수위, 단면 연직 유속 등의 확인이 가능하며, ISO 기준 불확실도 계산 기능을 포함한다. 대하천인 임진강 적성지점에서 실시한 ADCP 정지측정법은 봉부자법과 비슷한 측정시간이 소요되며 넓은 수위, 유량범위에서 측정이 가능한 방법으로 판단되었다. 기존의 유량측정이 수위, 유량에 따라 방법이 달라지고 측정 장비의 제약이 따르는 것에 반해 ADCP 정지측정법은 보다 넓은 수위, 유량 범위에서 적용이 가능하다. 즉, ADCP 정지 측정법은 평저수시뿐만 아니라 홍수시에도 유량 측정 가능한 방법이기 때문에 봉부자법 또는 초음파표면유속계와 같이 홍수시 사용되는 측정방법의 검증 수단으로서도 활용 가능할 것으로 판단된다.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.185-195
• /
• 2018

In the Seoul Metropolitan City, the PM(pariculate matter) application used by the citizens provides the PM concentration of the nearest monitoring stations located on the PM monitoring stations. Currently, the selecting method of the PM monitoring network considered by the Ministry of Environment is based on considering the monitoring station distribution and population density only. In this study, we analyzed the distance between PM monitoring station and the administrative center point in addition to the above considerations. The number of test sites was verified and the range of coverage of each monitoring stations was indicated by using the Voronoi algorithm and hexagon grid. The spatial position problem of the PM monitoring station was suggested by spatial data analysis. The variables of spatial data analysis are single-family houses, apartments, $1^{st}$ class neighborhood, $2^{nd}$ class neighborhood, garbage disposal plant, hazardous material disposal facility, factory, and the density map. The analysis result of the selection criterion considering the additional variables for new PM monitoring stations was presented, in addition to the selection criteria provided by the Ministry of Environment.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.438-445
• /
• 2020

The characteristics of forest environmental factors were analyzed using the quantification theory (I) for prediction of the suitable area of erosion control dams. The results indicated that sediment discharge in small forest catchments was significantly correlated with dredging passage (0.7495) and age class (0.6000). In contrast, area (0.3416), slope gradient (0.3207), rainfall (0.3160), altitude (0.2990) and soil type (0.2192) were poorly correlated. Following quantification theory (I), we developed a selection decision table for erosion control dams based on sediment discharge rate as class I (highly suitable site, greater than 2.2496), class II (suitable site, 1.1248~2.2495), and class III (poorly suited site, lower than 1.1247).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.499-499
• /
• 2022

급격한 도시화와 이로인한 불투수면의 증가는 유역의 물순환을 왜곡시키고 있다. 직접유출의 증가와 침투량 감소로 이어지며 이는 지하수 함유량의 감소와 하천건천화를 유발한다. 환경부는 더 이상의 물순환 왜곡을 막기위해 물환경보전법상의 물순환율을 정의하고 물순환 관리목표를 설정하였으며, 제3차 강우유출 비점오염원관리 종합대책에서 물순환 사업 추진을 위한 소권역 별 우선순위산정을 과제로써 제시하고 있다. 대표적인 물순환 사업은 저영향개발기법 설치이다. 저영향 개발기법은 토지 및 공간을 이용해야하기 때문에 설치비용이 높고 위치선정에 제약이 많으며 유지관리도 어렵다. 이에 물순환 사업에는 단순 불투수면 뿐만아니라 사회, 경제적 요소까지 고려하여야한다. 본 연구에서는 물순환 우선순위를 산정하기위해 불투수면뿐만 아니라 사회, 경제적 요소까지 고려한 종합적인 우선순위를 산정하였다. 유역 물순환 평가를 위해 PSR framework을 이용하였다. PSR framework는 OECD가 개발한 지속가능성 평가 개념이며, Pressure, State, Response 세 가지 요소로 구분해 평가하게된다. PSR framework의 기본 개념은 인간의 활동들이 환경에 압력 (P)를 주고, 이로 인해 자연의 질과 영향 (S)을 미치며, 이에대한 회복을 위해 인식과 행동을 통해 정책과 제도 등을 통해 반응 (R)한다는 것이다. 본 연구에서는 PSR framework의 평가요소 Pressure는 불투수면 및 강우, State는 물순환, 하수관거, 수질, 수생태계, Response는 협력, 인식, 재정, 토지로 구분하여 평가하였다. 최종적으로 불투수면적 감축 대상 소권역('30년 무대책 불투수면적률 25% 이상)소권역에 대하여 최종우선순위를 산정하였다.

• Cartoon and Animation Studies
• /
• s.32
• /
• pp.263-288
• /
• 2013

This research is about effects which frontal-flat cameras have on narrative films. This kind of confined camera angles make the audience have a sense of tension which is barely defined logically. I think the tension comes from aleatorism. The paper is a research on how aleatorism is working on what kind of value, and what kind of effects it has on narrative films. Russian Formalism had argued they had to meet aesthetic values by totally excluding narratives. It can be said that this was a practice for Brecht's estrangement that a sensitive arousal prohibits the audience immersing into excessive empathy and then make them have a reflective thought. But occasionally, optical arousals in narrative films induce deeper immersion into contemplation rather than reflective thought. I intend to find cases regarding this textualising Front-flat camera angles in narrative films and analysing their contents. To do this, I suggest a more specified definition of 'aleatorism'. Because the concept of the aleatorism is different between an aspect of static image like paintings or photographs and narrative contents like cinema. It is divided into approach through form and approach through content. And I also suggest an operative definition about 'Frontal-flat camera angle' with a several confinements because its formal definition is very flexible depending on audience. The case analysis will be done with a form of discourse discerning two aspects of form and content. Conclusively, Frontal-flat camera angle in narrative film is basically have an effect of attention by optical stimuli. But it cannot be said that this always means deterioration of narrative value. Depending on causality of episodes in the whole story, aleatorism which Frontal-flat camera angle has can support immersed contemplation regarding following narrative rather than reflective thought regarding amusing aesthetics.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.276-282
• /
• 1988

Many landslides occurred at the western part of Gyeongnam province by the typhoon No. 875. Their conditions and causes were investigated and were summarized as follows : The total number of landslide occurred was 2,490 and its area was 156.53ha. In about 94% of landslides and about 97% of landslides area occurred in 3 counties, Sancheong, Hamyang and Geochang. The landslides smaller than 0.01ha was 49% of the total indicating that about half of them were the small landslides. Considering homogenous topography amount of precipitation and forest type landslides appeared to be mainly has a high affected by the geological factor because the landslides mainly occurred in the deep weathered soil of igneous rock. The landslides occured on concave slopes of 31 to $35^{\circ}$ in steepness with low crown density. In the area of the deep weathered soil, landslide likely occur repeatedly. Therefore, regular erosion control works are recommended in the area of pos for disaster prevention and counter-measures.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.16-25
• /
• 2003

Manun Reservoir, located in Andong district has the capacity of 2 million tons in irrigation water supply with the drainage area of $23.8\;km^2$. Manun Reservoir is over fifty year old, and shallow in depth. The ratio of drainage area (DA) to reservoir surface area (SA) as an effective physical parameter on water quality was 56.1 and was higher than those of other agricultural reservoirs. The ratio of reservoir storage (ST) to SA in Manun Reservoir was 4.79, and the mean depth was below 8m. Both ratios of DS/SA, total area (TA)/ST and ST/SA in Manun Reservoir were relatively higher than those in other agricultural reservoir and natural lakes in Korea. These physical parameters in Manun Reservoir, however, had a eutropic potential significance. Average of COD, IN, and TP in Manun Reservoir were 11.1 mg/L 1.426 mg/L, 0.093 mg/L, respectively. In the inflow stream of Manun Reservoir, the TN ($1.426{\sim}3.809\;mg/L$) was higher than those in reservoir. Only Lyngbya spp. was dominant in phytoplankton for this study period and Gymnodinium spp., Peridinium spp., and Cryptomonas spp. were dominant in zooplankton. According to the Carlson's trophic status index, Mnnun Reservoir was eutrophic in 1996, 1997, and 1999, and hypertrophic in 1998.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.1-11
• /
• 2021

The purpose of this study is to find out the main factors affecting air quality in urban physical space factors, and provide clues for environmental improvement. Nine monitoring stations in China's industrial city, Changchun, collected AQI concentration data from January 1, 2018 to December 31, 2019. This paper analyzes the types and distribution characteristics of urban physical facilities within a radius of 300m with the detection station as the center. The monitoring station is divided into three groups, and the difference in floating dust concentration among the three groups in different seasons is analyzed. The results show that AQI concentration is the highest in spring and winter, followed by summer, and the lowest in autumn. The place with the highest concentrations of AQI in spring are F (93.00), D (91.10), I (89.20), in summer are D (69.05), A (67.89), B (84.44), in autumn are I (62.80), G (60.84), D (53.27), D (53.27), in winter are I (95.82), H (95.60), f (94.04). Through SPSS analysis, it shows that the air index in a space with a diameter of 600 meters is related to forest land, grassland, bare land, water space, tree height, building area (average value), and building volume (average value). According to the statistical analysis results of spring and winter with the most serious pollution, forest land area (43,637m², 15.44%) and water surface area (18,736m², 6.63%) accounted for the majority, and group 1 (A, B, C) with the least average building area (448m², 0.17%) and average building volume (10,201m²) had the lowest pollution concentration. On the contrary, group 2 (D, E, F) had the highest AQI concentration, with less or no woodland (1,917m², 0.68%) and water surface area (0m², 0%), and the highest average building area (1,056m², 0.37%) and average building volume (17,470m³). It is confirmed that the characteristics of the area with the highest AQI concentration are that the more the site ratio of tree height above 12m, the smaller the site ratio of bare land, and the lower the pollution degree. On the contrary, the larger the area of bare land, the higher the pollution degree. By analyzing the characteristics of nine monitoring stations in Changchun, it can be seen that the air quality brought by the physical characteristics of urban space is closely related to the above factors.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.402-407
• /
• 2014

In this study, Italy poplar(Populus euramericana) was selected for test specimen to measure cutting power when it harvested. The experiment has been controlled as three levels of feed rate (0.41, 1.25 and 2.5 m/s), sawing speed (800, 1,000 and 1,200 rpm), and the five levels of root collar diameter (50, 70, 90 and 110, 130 mm). The harvested volume after 3 years (root collar diameter 50 mm) was 10.5 tons, which falls short of the target amount of biomass is 20~30 ton/ha. In addition, the biomass amount of diameter 90 and 110 mm which reached the target amount were estimated to be 23.5 and 32.5 ton/ha respectively. As a result of experiment, it was found out that power of 128.2 and 175.8 W are consumed in case of cutting with the feed rate of 0.41m/s and minimum sawing speed (800 rpm) respectively. With the working area of 0.3 ha/h, it is considered to present working capacities of 16.5 and 22.8 ton/h respectively. The power consumed at the feed rate of 1.25 m/s is estimated to be 113.8 and 153.7W respectively and working capacity in a working area of 1 ha/h is estimated to be 23.5 and 32.5 ton/h. The power consumed at the feed rate of 2.5 m/s is estimated to be 119.8 and 166.9 W respectively and working capacity in a working area of 2 ha/h is estimated to be 47.0 and 65.5 ton/ha respectively. Therefore, the power source of harvest machine at the feed rate of 1.25, 2.50 m/s and sawing speed of 800 rpm shall be selected as it can process the target amount of estimated biomass.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.270-278
• /
• 1997

This study was conducted to estimate future need and supply of labor in forestry in Korea. To estimate future labor demand, it was hypothesized that 3,503 thousand hectares of privately-owned forest land will need to be managed for normal forest development. At each step in the forest management process, the work-force requirement was estimated. To estimate future labor supply, 520 rural residents were interviewed to reveal their willingness to be employed in forestry under four hypothetical wage rates. From those, 490 questionnaires were used to develop a probability function for labor supply. Based on this function, it was estimated that 39,190 forest workers will be needed per year for the next ten years. This labor needs will be met between the years 2003 and 2004 if the real wage rate rises 5% per year, and in 2001 if wages increase 7% annually. This assumes a base salary of 32,200 Won. However, if the wage rate remains constant at the 1995 level of 32,200 Won, then the labor deficit will be perpetuated.