• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.171-175
• /
• 2000

국내 시공사례가 가장 많은 사석식 경사제는 피복층(cover layer), 중간피복층(underlayer), 그리고 내부사석(core and bedding layer)으로 이루어져 있다. 이 중 중간피복층의 재료는, 피복재의 중량(W)에 대한 중량비 W/10에서 W/15의 자연석을 이용하여 시공하는 것이 보통이다. 그러나, 항만의 대형화에 따른 설계파의 증가로 이형블록과 같은 피복재의 소요 중량이 증가하는 추세이며 이에 따른 중간피복재의 소요중량도 크게 되어 그에 만즌 자연석을 구하기 어려운 실정이다. (중략)

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.81-86
• /
• 2014

The analysis of the cost optimization and the total demand weight of 9% Ni-steel plates for installing shell stiffeners in the side wall of the large capacity LNG storage tank are carried out in order to reduce the costs of the plates for stiffeners. This study can be possible for developing the calculation program which evaluates the bill-of-material for stiffeners to reduce the manual calculation time of tank designer, and to enable the estimation of weight and cost for various plate width. The results show that the demand weight and cost are reduced as the plate width is wider. Nevertheless, both the weight and the cost with plate width for stiffeners should be compared and evaluated to obtain the optimum cost time to time because of various cost incremental factors of plates such as transportation and handling cost, etc.

• 어항어장
• /
• s.44
• /
• pp.67-75
• /
• 1998

본 연구의 목적은 서로 다른 형태를 갖는 피복블록의 형상에 따른 Hudson식의 안정계수 값들과 양압력의 관계를 방파제의 안정성과 연계 해석하여, 방파제 단면설계에 있어서 피복블록의 선택 및 소요중량 산정에 효과적으로 이용하고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.2
• /
• pp.23-32
• /
• 2023

Probabilistic and deterministic analyses are implemented for the armor units of rubble foundation mound of composite breakwaters which is needed to protect the upright section against the scour of foundation mounds. By a little modification and incorporation of the previous empirical formulas that has commonly been applied to design the armor units of foundation mound, a new type formula of stability number has been suggested which is capable of taking into account slopes of foundation mounds, damage ratios of armor units, and incident wave numbers. The new proposed formula becomes mathematically identical with the previous empirical formula under the same conditions used in the developing process. Deterministic design have first been carried out to evaluate the minimum weights of armor units for several conditions associated with a typical section of composite breakwater. When the slopes of foundation mound become steepening and the incident wave numbers are increasing, the bigger armor units more than those from the previous empirical formula should be required. The opposite trends however are shown if the damage ratios is much more allowed. Meanwhile, the reliability analysis, which is one of probabilistic models, has been performed in order to quantitatively verify how the armor unit resulted from the deterministic design is stable. It has been confirmed that 1.2% of annual encounter probability of failure has been evaluated under the condition of 1% damage ratio of armor units for the design wave of 50 years return period. By additionally calculating the influence factors of the related random variables on the failure probability due to those uncertainties, it has been found that Hudson's stability coefficient, significant wave height, and water depth above foundation mound have sequentially been given the impacts on failure regardless of the incident wave angles. Finally, sensitivity analysis has been interpreted with respect to the variations of random variables which are implicitly involved in the formula of stability number for armor units of foundation mound. Then, the probability of failure have been rapidly decreased as the water depth above foundation mound are deepening. However, it has been shown that the probability of failure have been increased according as the berm width of foundation mound are widening and wave periods become shortening.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.5
• /
• pp.102-108
• /
• 2023

In this study, hydraulic model tests were performed to investigate the stability of armor units at harbor side slope for rubble mound structures. The armor units on the rear slope were rocks. The Korean design standard for harbor and fishery port suggested the design figures that showed the ratio of the armor weight for each location of rubble mound structures and it could be known that the same weight ratio was needed to the sea side and rear side slope of rubble mound structures. The crest elements were commonly applied to the design process of rubble mound structures in Korea and the investigation of the effects of super structures would be needed. The damage rate (S =2) was applied and the stable wave height was measured for each test condition. The results were suggested as the armor weight ratio of the rear side slope(armor rock) to the sea side slope (tetrapod) in relation to the relative crest height.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2122-2123
• /
• 2011

대규모 발전단지의 계통연계 및 지역간 전력 융통과 대도시지역의 전력공급원 역할을 담당하기 위해 현재 전국적으로 67개의 345kV 이상 초고압변전소가 운전되고 있고, 향후에도 지속적으로 변전설비가 확충될 예정이다. 초고압 변전소에 필수적으로 설치되는 주변압기, 리액터는 그 용량에 따라 대형 중량물(345kV 변압기 66톤, 리액터 88톤 등)로 제작됨으로써 특수 운반차량을 통해서만 공장에서 현장까지 운반되고 있다. 현행 국내 도로법에서는 운반차량의 축하중이 10톤을 초과하거나 적재물 중량을 포함한 총 중량이 40톤을 초과할 경우 도로(교량)관리청의 허가를 득한 후 운반토록 규정하고 있고, 허가 조건을 맞추기 위해서는 교량보강 등의 공사를 통해 교량에 가해지는 중량을 분산시키거나 별도 우회도로를 설치하고 있다. 교량보강 공사는 교량의 종류에 따라 하부지보, 상부가교, 우회가교, 우회가도 등의 개별공법 또는 복합공사를 시행하고 있으나, 엄청난 토목공사비와 시간이 소요되고 있는 실정이다. 따라서 본 논문에서는 중량물 교량통과를 위해 대규모 토목공사 없이 운반할 수 있는 신기술 장비인 'Crossing Bridge System'에 대한 이론적 내용과 더불어 해당 기술의 특징 및 활용계획에 대해 기술하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.244-250
• /
• 2019

We investigated the relationship between morphological characteristics and individual dry weight to develop a method for estimating the individual dry weight of sheet form macroalgae: Ulva australis, Ulva linza, Pachymeniopsis lanceolata, and Pyropia yezoensis. In Total, 319 thalli of various sizes were collected at six sites from February 2017 to December 2018. An interspecific allometric exponent of 0.28 was found for length-biomass allometry in four sheet form macroalgae, corresponding to a 1/4-power law for primary producers. The relationships between surface area and individual dry weight, as well as between individual fresh weight and individual dry weight, were found to fit significantly using linear regression equations. This explained 94-99 % of individual dry weight, indicating that surface area and individual fresh weight can be used to accurately estimate individual dry weight. We propose the use of this method when experimental processes do not allow individual dry weight to be measured directly, so researchers can save both time and expense.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1446-1449
• /
• 2007

인정바닥구조는 신청에서부터 인정서 발급까지 기본적으로 2개월 이상이 소요되며, 신청 제품이 많을수록 그 기간은 길어지게 된다. 본 논문은 이와 같은 완충재의 성능을 확인하기 위해 소요되는 기간과 비용을 획기적으로 단축할 수 있는 간편한 방법을 제시하기 위한 것이다. 완충재 설치 이후 습식으로 시공되는 경량기포콘크리트와 모르터를 사전에 일정 크기로 제작(축소모형 시험판)한 후 골조가 완성된 현장에서 바닥충격음을 측정하는 방법이다. 완충재 2개 제품에 대하여 축소모형 시험판을 이용하여 측정한 결과와 전체 세대를 시공한 후 측정한 결과를 비교한 결과 경량충격음은 축소모형 시험판이 훨씬 낮은 결과를 나타냈지만 중량충격음은 비슷한 결과를 나타냈다. 이로써 축소모형 시험판을 이용하여 바닥충격음을 측정하는 것은 경량충격음을 저감하기 위한 재료 선정 및 제품 시스템 구성 등에 활용될 수 있을 것이며, 현장에서 중량충격음 차단성능을 신속하게 검증할 수 있는 방법으로 활용할 수 있을 것으로 기대된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.92-101
• /
• 2020

It is necessary to develop a rational method for evaluating the safety of bridges for the passage of inseparable crane vehicles exceeding the limit weight. In this study, the same method applied to the development of the recently introduced reliability-based highway bridge design code - limit state design method is applied to the calibration of the live load factor for the crane vehicle. Structural analysis was performed on the concrete bridge and the required strengths of the previous design code, the current design code and AASHTO LRFD were compared. When comparing the unfactored live load effect, the live load of the crane was greater than that of the current and previous design code. When comparing the required strength by applying the calibrated live load factor, the previous design code demands the largest strength and the current design code and the crane live load effect yields similar value. The results of safety evaluation of the actual bridges on the candidate route for the crane passage secured the same reliability as the target reliability index required by the design code and the strength of the cross section of the actual bridge is calculated greater than the required strength for the passage of the crane, which confirms the safety for the passage of the crane.

• Korean Journal of Plant Resources
• /
• v.18 no.2
• /
• pp.337-342
• /
• 2005

This study was conducted to investigate the bark production from a top branch(Woojuk) of lacquer tree(Rhus verniciflua) that collected Rhus lacquer in summer, analyzing a relationship between several factors - diameter, tree weight, weight of Woojuk and bark. The weight of Woojuk averaged was made up $48\%$ of the tree on average. As the weight of the tree increased, however, the Woojuk showed the rising trend. It was turned out that the tree size for making 1kg of dry bark must be at least DBB 8cm. The result on Woojuk's bark was that $43.3\%$ of total trees produced a green bark of 1.1kg to 1.5kg, and most of them put out 1.5kg and less. Also the rate of trees to make 0.6kg to 1.0kg of dry bark was highest in $50.8\%$, but its production in most trees was 1.0kg and below. As the moisture content of a green bark averaged $39\%$, it is estimated that the production of 1kg in dry bark requires at least 6kg of top branch in lacquer tree.