• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.12
• /
• pp.680-686
• /
• 2002

In deep-submicron (BSM) design, coupling effects between wires on the bus cause serious problems such as crosstalk delay, noise, and power consumption. Most of the previous works on bus encoding are targeted either to minimize tile power consumption on bus or to minimize the crosstalk delay, but not both. In this paper, we propose a new bus encoding algorithm that minimizes the power consumption on bus and eliminates the crosstalk delay simultaneously. We formulate and solve the problem by minimizing a weighted sum of the self transition and cross-coupled transition activities on bus From experiments using a set of benchmark designs. it is shown that the proposed encoding technique consumes at least 15% less power over the existing techniques, while completely eliminating the crosstalk delay.

• The KIPS Transactions:PartA
• /
• v.19A no.1
• /
• pp.17-22
• /
• 2012

The demand of high performance processor is soaring due to the extending of mobile and small electronic device market. CGRA(Coarse Grained Reconfigurable Architecture) is the processor satisfying both of performance and low-power demands and a great alternative of ASIC that can be reconfigured. This paper presents a novel low-power mapping algorithm that optimizes the number of used computation resource in the mapping phase by considering data transfer time. Compared with previous mapping algorithm, ours reduce energy consumption by up to 73%, and 56.4% on average.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.766-768
• /
• 2005

컴퓨팅 환경이 무선과 휴대용 시스템으로 변화하면서, 전력효율이 점점 중요해지고 있다. 특히 내장형 시스템일 경우에 더욱 그러한데 이중 메모리에서 소모되는 전력이 전체 전력소모의 두 번째 큰 요소가 되고 있다. 메모리 시스템에서의 전력소모를 줄이기 위해서 DRAM의 저전력 모드인 냅모드(nap mode)를 활용할 수 있다. 냅모드는 액티브 모드(active mode)일 때의 $28\%$의 전력만을 소모한다. 하지만 하드웨어 컨트롤러는 운영체제가 협조하지 않으면 이 기능을 효율적으로 활용하지 못한다. 이 논문에서는 DRAM의 액티브 유닛(active unit)의 수를 최소화하는 방법에 초점을 맞춘다. 운영체제는 참조되지 않는 메모리를 냅모드에 놓음으로써 최소한의 유닛들만을 액티브 모드에 놓아 프로그램이 수행될 수 있도록 피지컬(physical) 페이지들을 할당한다. 이것은 PAVM(Power Aware Virtual Memory) 연구의 일반화된 시스템 전반에 대한 연구라고 할 수 있다. 우리는 모든 피지컬 메모리를 고려하고 있으며, 특히 평균적으로 전체 메모리의 절반을 사용하는 버퍼 캐시를 고려하고 있다. 버퍼 캐시의 용량과 그 중요성 때문에 PAVM 방식은 버퍼 캐시를 고려하지 않고는 완전한 해법이 되지 못한다. 이 논문에서 우리는 메모리의 사용처를 분석하고 저전력 페이지 할당 정책을 제안한다. 특히 프로세스의 주소공간에 매핑(mapping)된 페이지들과 버퍼 캐시가 고려된다. 이 두 종류의 페이지들간의 상호작용과 그 관계를 분석하고 저전력을 위해 이러한 관계를 이용한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.492-498
• /
• 2012

Characteristics of DBD(Dielectric Barrier Discharge) plasma actuator as design parameters were investigated for plasma flow control. Flow velocity and power consumption of the DBD plasma actuator were measured according to the design parameters such as discharge voltage and frequency, gap, width and length of electrode, and the thickness of dielectric barrier. The flow velocity and power consumption increased as the discharge voltage and frequency increased. As the electrode gap increased, the flow velocity increased with decreasing the power consumption, whereas high voltage was required for the plasma discharge. The flow velocity increased as the upper-electrode width decreased, and as the lower-electrode width increased at the constant power consumption. The performance of the DBD plasma actuator can be estimated at the given discharge and geometry conditions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.261-266
• /
• 2007

내장형 시스템에 보다 강력한 성능이 요구됨에 따라 내장형 마이크로 프로세서는 보다 깊은 파이프라인을 채택하고 있다. 따라서, 내장형 마이크로 프로세서는 보다 정확한 분기 예측기를 필요로 하고 있다. 이러한 상황에서 분기 예특기의 구조, 성능 및 전력 소모와 전체 시스템의 전력 소모 사이의 trade-off를 분석하는 것은 매우 중요하다. 내장형 환경에서 시스템의 전력 소모는 설계 시 매우 중요하게 고려되어야 한다. 특히 내장형 시스템의 요구사항은 동작할 응용 프로그램에 의하여 규정되고, 전력 소모도 응용프로그램의 구조와 강하게 연관되어 있다. 본 논문의 목표는 내장형 환경에서 성능-전력 공간에서 분기 예측기를 분석하는 기법을 제시하는 것에 있다. 이를 통하여, 분기 예측기 테이블의 성능-전력을 고려한 최적화된 크기를 찾을 수 있다. 이러한 목표는 수학적 모델링을 통한 정량적 예측의 수행 및 시뮬레이션 결과와의 비교를 통한 수학적 모델링의 검증의 과정을 통하여 이루어진다. 결과는 우리의 수학적 모델이 성능-전력 공간에서 분기 예측기 테이블의 최적화된 크기 결정의 해법을 제공하고 있음을 보여주고 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1582-1589
• /
• 2000

A dynamic D-flipflop is proposed aiming at low power and high frequency(GHz) operations. The proposed D-flipflop uses a smaller number of pmos transistors that it operates high speed in same dimensions. Also, it consumes lower power than conventional approaches by a shared nmos with clock input. In order to compare the performance of the proposed D-flipflop, we perform simulation estimating power consumption and maximum operating frequency of each same dimension D-flipflop. A high speed dual-modulus prescaler employing the proposed D-flipflop. A high speed dual-modulus prescaler employing the proposed D-flipflop. A high speed dual-modulus prescaler employing the proposed D-flipflop is evaluated via the same method. The simulation results show that the proposed D-fliplflop has good performance than conventional circuits.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1511-1518
• /
• 2008

Wireless sensor network is a network that consists of small wireless sensor nodes. Sensor nodes transfer the sensed data about the objects or environment to the sink through wireless channel. The energy dissipation by wireless transmission is the primary factor of energy dissipation in the sensor node. To utilize the limitted resource at the sensor node, it is required to reduce the number of wireless transmission. In the paper, we proposes a new energy efficient method, NRMC, to reduce the energy dissipation by using the compression technique - DPCM, Wavlet, Quantization, RLC. With NTRC, the life time of sensor network could be increased.

• The Korean Journal of Applied Statistics
• /
• v.32 no.2
• /
• pp.319-330
• /
• 2019

Forecasting the electricity consumption through analyzing the past electricity consumption a advantageous for energy planing and policy. Machine learning is widely used as a method to predict electricity consumption. Among them, ensemble learning is a method to avoid the overfitting of models and reduce variance to improve prediction accuracy. However, ensemble learning applied to daily data shows the disadvantages of predicting a center value without showing a peak due to the characteristics of ensemble learning. In this study, we overcome the shortcomings of ensemble learning by considering the temperature trend. We compare nine models and propose a model using random forest with the linear trend of temperature.

• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.188-196
• /
• 2005

This paper presents a new test data compression and low power scan test method that can reduce test time and power consumption. A proposed method can reduce the scan-in power and test data volume using a modified scan cell reordering algorithm and hybrid adaptive encoding method. Hybrid test data compression method uses adaptively the Golomb codes and run-length codes according to length of runs in test data, which can reduce efficiently the test data volume compare to previous method. We apply a scan cell reordering technique to minimize the column hamming distance in scan vectors, which can reduce the scan-in power consumption and test data. Experimental results for ISCAS 89 benchmark circuits show that reduced test data and low power scan testing can be achieved in all cases. The proposed method showed an about a 17%-26% better compression ratio, 8%-22% better average power consumption and 13%-60% better peak power consumption than that of previous method.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.19-38
• /
• 2002

To evaluate the effects of transportation system operation, usually measures of effectiveness(MOE) such as travel time, space mean speed, stop/delay ratio have been used. But, energy consumption as well as the existing MOE in transportation receives more attention as an alternative MOE in transportation operation. The purpose of this study is a development of procedure, which could measure the relative energy consumption for each alternative and compare the results. A mesoscopic simulator called INTEGRATION is used to evaluate the operation of high occupancy vehicle lane, signal optimization, lane expansion, and the application of ITS. Among those, the application of ITS shows the greatest effectiveness in energy reduction, and then lane expansion, signal optimization, and the operation of high occupancy vehicle lane in the order named. Because we don't consider the characteristics of vehicle class, Potential demand and the simulation time is just for an hour. it is recommended that a procedure for precise economic analysis and an improvement in methodology are needed in the future for the expanded application of this study.