• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.301-307
• /
• 2013

SONAR detection performance is one of the key survivability factors in underwater weapon systems. In order to catch the acoustic ability of SONAR, multilayer SONAR structures are analyzed using the elastic theory. The applied results for the simple models are compared with those from commercial program, ANSYS, and the reliable results are obtained. The analysis of sound pressure level (SPL) and echo reduction (ER) by the thickness change of multilayer SONAR structures are performed using the verified elastic theory. As the thickness of anechoic layer is increased, SPL is distributed evenly and ER is increased slightly with the frequency. In decoupling layers and steel layers, SPL are hardly changed and ER is slightly decreased with the thickness increase of those layers. SPL and ER are not affected by the thickness change of the carbon reinforced plastic (CRP) layer. Therefore, to improve the acoustic ability of multilayer SONAR structures, the thickness increase of the anechoic layer and minimization of the decoupling layer, steel layer and CRP layer are desirable.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.89-96
• /
• 2016

The performance of anti-submarine sonar detection is required to improve by the development of submarine noise reduction technology. because of the need of an anti-submarine detection ability, known for superior beamforming performance, adaptive beamforming algorithms have been considered as an alternative beamforming algorithm of a conventional beamforming algorithm. In order to achieve improved performance by applying an adaptive beamforming algorithm to the sonar system, the adaptive beamforming algorithm applicability of system must be verified, To do this, the performance index for the system applicability must be established. In this paper, a tracking initiation probability of the adaptive beamforming algorithm and the conventional beamforming algorithm was calculated and the performance of both techniques was quantified, a system applicability of the adaptive beamforming algorithm was reviewed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.277-280
• /
• 2000

수중환경에서 표적의 탐지 성능을 향상시키기 위하여 능동 소나에서는 높은 시간-대역폭곱의 파형들을 사용하며 대표적인 것으로 LFM 펄스를 들 수 있다 LFM 펄스를 사용하여 표적까지의 거리와 표적의 속도를 추정하는 방법으로는 모호함수를 사용하는 방법과 deconvolution 방법 및 FR-기반 기법 등이 있다. 이러한 기법중 모호함수 사용 방법과 deconvolution 방법은 능동 소나의 운용 주파수 대역에서 많은 연산량이 요구되므로 실제 시스템에 적용하기에는 제약을 받는다. 그리고 다른 기법에 비해 적은 연산량을 가지는 FFT-기반 상관관계 기법은 실제 시스템에 적용이 가능하지만 다중경로에 의한 성능 저하를 가지고 있다. 본 논문에서는 적은 연산량을 가지는 FFT-기반 기법을 보완하여 다중경로에 적용 가능한 새로운 탐지기를 제안한다.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.149-153
• /
• 2008

General underwater target detection methods adopt short-time FFT for estimate target doppler. This paper proposes the efficient target detection method, instead of conventional FFT, using approximate FFT for distributed sensor network target detection, which requires lighter computations. In the proposed method, we decrease computational rate of FFT by the quantization of received signal. For validation of the proposed method, experiment result which is applied to FFT based active sonar detector and real oceanic data is presented.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.500-510
• /
• 2023

Passive sonar signals mainly contain both normal and abnormal signals. The abnormal signals mixed with normal signals are primarily detected using an AutoEncoder (AE) that learns only normal signals. However, existing AEs may perform inaccurate detection by reconstructing distorted normal signals from mixed signal. To address these limitations, we propose an abnormal signal detection model based on a Recurrent Neural Network (RNN) and vector quantization. The proposed model generates a codebook representing the learned latent vectors and detects abnormal signals more accurately through the proposed search process of code vectors. In experiments using publicly available underwater acoustic data, the AE and Variational AutoEncoder (VAE) using the proposed method showed at least a 2.4 % improvement in the detection performance and at least a 9.2 % improvement in the extraction performance for abnormal signals than the existing models.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.47-54
• /
• 2016

In the underwater environment, high resolution can be achieved in the range direction by transmitting and receiving a signal of a particular band and/or waveform. The design of a transmit signal used in the active sonar is very important in order to detect a cylindrical object within a short distance less than 1 km, which is the detection distance of this paper. Designing a transmit signal optimal to a sonar requires appropriate selection of its center frequency and bandwidth, which allows the maximum detection distance of a sonar. In this paper, in terms of maximizing echo excess and signal to noise ratio (SNR), optimum frequency analysis is carried out under various conditions of diverse parameters. In addition, the investigation focused on the determinating a bandwidth is also performed for the purpose of satisfying the performance requirement of range resolution and azimuth resolution.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.455-471
• /
• 2013

Active sonar has been commonly used to detect targets existing in the shallow water. When a signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals, scattering from rough sea surface and ocean bottom, and refraction by sound speed structure, which makes target detection difficult. It is therefore necessary to consider these channel properties in the target signal simulation in operational performance system of active sonar. In this paper, a monostatic active sonar system is considered, and the target echo, reverberation, and ambient noise are individually simulated as a function of time, and finally summed to simulate a total received signal. A 3-dimensional highlight model, which can reflect the target features including the shape, position, and azimuthal and elevation angles, has been applied to each multipath pair between source and target to simulate the target echo signal. The results are finally compared to those obtained by the algorithm in which only direct path is considered in target signal simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.383-391
• /
• 2014

In order to detect underwater acoustic signals, various SONAR array types have been developed, including towed line array SONAR system (TASS). However, the TASS suffers from performance degradation which is caused by aperture deformation during a turn, because the TASS have a long-aperture array. A parabolic array model for turning TASS have been developed to solve the degradation problem occurred during a turn. In this paper, adaptive beamforming system is developed using the parabolic TASS model to cancel interference signals. The developed beamforming system is based on generalized sidelobe canceller (GSC) structure and self-tuning adaptive algorithm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.33-40
• /
• 2006

In towed array passive sonar system, sonar operators cannot detect and track the all targets simultaneously in the omni-directional area by just Operator Initiated Tracking(OIT). In this paper, omni-directional automatic target detection and tracking algorithm is described and optimize the parameters through ocean data to overcome the drawbacks of OITs. The algorithm is verified through sea trials with submarines.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.172-180
• /
• 2012

In multi-static sonar for detecting an underwater target, received signals contain the target echo, reverberation and clutter. Clutter and reverberation are main causes of increasing the false alarm rate. MRAL classifies received signals according to the spatial similarity, and it regards classified signal as reflected signals from a reflector. MRAL reduces the false alarm rate this way. However, the results of MRAL can have localization errors. In this paper, an MRAL post processing algorithm is proposed to reduce the localization errors with the least square (LS) method.