• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.1
• /
• pp.105-114
• /
• 2021

The objective of this study is to analyze the shear bond strength of orthodontic buttons according to light tip distance and optic fiber diameter when an extended optic fiber was applied to the tip of a curing light unit. In this study, 315 extracted premolar teeth were divided into 3 groups. Orthodontic buttons were attached using no optic fibers (Group I), 3.0 mm diameter optic fibers (Group II), or 5.0 mm diameter optic fibers (Group III). Each group was divided into subgroups A - C (5.0, 10.0, and 15.0 mm light tip distance), respectively. Shear bond strength was then measured while varying the light tip distance. In group I, shear bond strength significantly decreased as the light tip distance increased. When the shear bond strength was evaluated according to the optic fiber diameter, no statistical significance was observed in group of 5.0 mm light tip distance. Compared with group IB, group IIIB showed significantly greater shear bond strength. Compared with group IC, all groups using 3.0 or 5.0 mm diameter optic fibers showed significantly greater shear bond strength. Therefore, when a curing light unit has poor accessibility, optic fibers with a large diameter should be considered.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.2
• /
• pp.168-175
• /
• 2021

This study compared the microleakages and compressive strengths of various base materials. To evaluate microleakages, 50 extracted permanent premolars were prepared. The teeth divided into 5 groups of 10 each according to the base materials. Cavities with a 5.0 mm width, 3.0 mm length, and 3.0 mm depth were formed on the buccal surfaces of the teeth. After filling the cavities with different base materials, a composite resin was used for final restoration. Each specimen was immersed in 2% methylene blue solution and then observed under a stereoscopic microscope (× 30). To evaluate the compressive strength, 5 cylindrical specimens were prepared for each base material. A universal testing machine was used to measure the compressive strength. The microleakage was highest in the Riva light cure^TM group and lowest in the Biodentine^TM and Well-Root^TM PT groups. For the compressive strengths, in all groups, acceptable strength values for base materials were found. The highest compressive strength was observed in the Fuji II LC^TM group and the lowest strength in the Well-Root^TM PT group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.225-231
• /
• 2019

Purpose: This study was undertaken to compare fracture and flexural strength of provisional restorative resins fabricated by additive manufacturing, subtractive manufacturing, and conventional direct technique. Materials and methods: Five types of provisional restorative resin made with different methods were investigated: Stereolithography apparatus (SLA) 3D printer (S3Z), two digital light processing (DLP) 3D printer (D3Z, D3P), milling method (MIL), conventional method (CON). For fracture strength test, premolar shaped specimens were prepared by each method and stored in distilled water at $37^{\circ}C$ for 24 hours. Compressive load was measured using a universal testing machine (UTM). For flexural strength test, rectangular bar specimens ($25{\times}2{\times}2mm$) were prepared by each method according to ISO 10477 and flexural strength was measured by UTM. Results: Fracture strengths of the S3Z, D3Z, and D3P groups fabricated by additive manufacturing were not significantly different from those of MIL and CON groups (P>.05/10=.005). On the other hand, the flexural strengths of S3Z, D3P, and MIL groups were significantly higher than that of CON group (P<.05), but the flexural strength of D3Z group was significantly lower than that of CON group (P<.05). Conclusion: Within the limitation of our study, provisional restorative resins made from additive manufacturing showed clinically comparable fracture and flexural strength as those made by subtractive manufacturing and conventional method.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.280-290
• /
• 2021

Color stability of pulp-capping material is considered vital to the final aesthetic result since the material is placed in the coronal area. The purpose of this study was to compare the color stability of various pulp-capping materials by analyzing color change of tooth over time. A cavity was formed in the crown of the extracted premolar, and 4 types of pulp-capping materials were filled. Color assessment was performed with a spectrophotometer at different intervals: before placement; immediately after material placement; 1 day, 1 week, 2 weeks, 4 weeks, 8 weeks, 12 weeks, and 16 weeks after placement. Proroot white MTA^® and TheraCal LC^® showed a significant decrease in the L^* value and an increase in the ∆E^* value over time. In contrast, Biodentine^® and Well-Root^TM PT showed no significant change in the L^* value and maintained a steady ∆E^* value. The application of pulp-capping materials containing bismuth oxide as a radiopacifier may result in a color change of teeth. Long-term color stability of pulp-capping materials should be considered when treating teeth with thin enamel thickness or in aesthetically important area.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.264-273
• /
• 2022

Due to the development of properties of adhesive materials currently used in dentistry, the bonding ability between the brackets and the tooth enamel has been greatly improved. In general, in situations where cooperation can be obtained, adhesion of the orthodontic bracket through the conventional three-step process can show excellent bonding strength. However, if it is difficult to expect patient cooperation, as in the pediatric dentistry area, or if moisture isolation is not properly performed, the binding strength that does not reach the expected effect. As a result, various products that simplify the process for adhesion are being developed. The aim of this study was to evaluate and compare the shear bonding strength between the conventional 3-step adhesion system, self-etching primer system and one-step adhesion system that reduces the priming process. A total of 60 human maxillary, mandibular premolars were prepared. Group I (control group) were followed conventional 3-step bonding process. Group II were conditioned with self-etching primer. Group III were etched with 37% phosphoric acid and brackets were bonded with self-priming adhesive. The resultant shear bond strength of each group was measured and an adhesive remnant index (ARI) was recorded. The mean shear bond strength of group I, II, III were 14.69 MPa, 11.21 MPa and 12.21 MPa respectively. Significant differences could only be found between group I, II and group I, III (p < 0.05). The ARI indicated no significant difference among all groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.3
• /
• pp.277-291
• /
• 2023

This study aimed to compare the effects of applying different types of dentin bonding agents (DBAs) on tooth and on the sealing ability of CSC in regenerative endodontic procedures (REPs). Specimens were made from 120 human first premolars and categorized into the following groups based on the presence and the type of DBA: Group I, no bonding; Group II, One-Step; Group III, Clearfil SE Bond; and Group IV, Single Bond Universal. Subsequently, the groups were categorized into Subgroup a and Subgroup b, in which Endocem MTA^® Premixed Regular and Biodentine were used, respectively. The CIE L^*a^*b^* on the photos taken prior to TAP placement (S0), 1 week after TAP placement (S1), 2 weeks after TAP placement (S2), 4 weeks after TAP placement (S3) and 2 weeks after CSC placement (S4) was used to assess discoloration. The samples were submerged in a 2% methylene blue solution and magnified by 30 times under a stereomicroscope to assess microleakage. The application of DBA during REP reduced crown discoloration, while Biodentine showed minimal discoloration with or without DBA and regardless of the DBA type. Additionally, the application of DBA did not increase microleakage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.213-221
• /
• 2022

Purpose: The efficacy of the amount of sealer in the root canal and two retreatment NiTi file systems in removing filling materials. Materials and Methods: Extracted premolars with a single root canal were selected for this study. After access opening and root canal preparation up to size #40/.06, the specimens were randomly divided into four groups. Gutta percha (GP) tapers of .06 or .04 were used for each group and filled using a single-cone filling technique with CeraSeal, a calcium silicate-based sealer. Each group was retreated either using the ProTaper Universal Retreatment System (PTUR) or the Hyflex Remover (HR). The time taken to remove the filling material, the amounts of apically extruded debris, and canal cleanliness were measured and compared. Results: The amount of sealer did not affect the efficiency when removing the filling materials. However, the filling material was removed faster in the HR group than in the PTUR group. Two types of NiTi files showed similar retreatment effects in the amounts of apically extruded debris and in the degree of canal cleanliness. Conclusion: The amount of sealer in canal filling had no significant effect on retreatability. Retreatment with HR removed filling materials is faster than PTUR. There was no difference in other removal efficiencies according to the type of retreatment NiTi file.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.219-237
• /
• 1999

This study was designed to evaluate the frequency and the severity of root resorption of the permanent teeth before orthodontic treatment by means of radiograph in the malocclusion patients. In this study the author analysed the frequency and the severity of root resorption in individual teeth, the relationships of the frequency and the severity of root resorption and age, sex, Angle's classification, overjet, overbite, and maxillary and mandibular incisor inclination, and the relationships of the frequency of root resorption and the characteristics of malocclusion and marked occlusal attrition showed in individual teeth. The results were as follows. 1. All of the persons examined showed some evidence of root resorption in one or more of the permanent teeth, $35.84\%$ of the teeth examined and more frequent in female group than male group(p<0.01). 2. On the susceptibility of the root resorption in individual teeth in this study, the author found the mandibular incisors and the maxillary incisors, in the order named, to be most susceptible in all affected teeth, but maxillary central incisors, maxillary first bicuspids, and maxillary lateral incisors, in the order named, were more susceptible to marked root resolution. 3. The more proclined maxillary Incisors the more affected root resorption in four maxillary incisors and the more proclined mandibular incisors the more affected root resorption in four mandibular incisors. 4. Overbite more affected root resorption than overjet, and the higher tender to openbite the more frequent was root resorption. 5. On the characteristics of malocclusion showed in individual teeth, the openbite teeth combined with crossbite, were most frequent in root resolution.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.373-384
• /
• 2003

The purpose of this study was to evaluate the eruption pattern of a cyst-associated mandibular premolar after marsupialization of a dentigerous cyst in children. The result from the twenty two pairs of normalized panoramic radiographs of twenty two patients who underwent neither extraction nor orthodontic traction of the cyst-associated mandibular after marsupialization were as follows. 1. The eruption speed of a cyst-associated premolar was 3.5 times faster than that of the normal contra-lateral premolar(p<0.05). The angulation change of test group was an average of $2.7^{\circ}$ per month. 2. In the change of the level of root formation, the group which had a little root maturity tended to be faster in the eruption speed(p>0.05) and the R1/4 group had a great change in the angulation change(p>0.05). 3. In the change to be with the cusp position index, the eruption speeds were increased to the 30% deviation groups. But, the eruption speed was decreased above that(p>0.05). 4. Group with cyst diminishment rate of more than $80mm^2$ per month showed the fastest eruption speed of all(p<0.05). 5. The mesial angulated teeth in the test group were decreased more rapidly than the distal angulated teeth in the eruption speed(p>0.05). But, increased in the angulation change(p<0.05). 6. There was a tendency of faster tooth eruption with less deviation of tooth axis. Group with tooth axis deviation of less than $15^{\circ}$ showed the fastest angulation change of all(p<0.05). 7. The eruption speed and the angulation change rapidly decreased during the first 6 months following marsupialization. Based on the results of this study, a cyst-associated mandibular premolar erupted more rapidly after marsupializaton. We thought so that it's prognosis was good if the tooth had a little root maturity, a little devitation and cyst lesion healed faster. We recommend that if there is enough space for eruption, orthodontic traction and surgical treatment of the cyst-associated tooth should be postponed 6 months after marsupialization.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2010

The purpose of this study was to compare the strain on the alveolar ridge in the centric, eccentric and protrusive position according to the occlusal scheme (bilateral balanced occlusion with 33 degree anatomical teeth, group B; monoplane occlusion with non-anatomical teeth, group M; lingualized occlusion with 33 degree anatomical teeth and non-anatomical teeth, group L; of complete dentures. Experimental dentures were set bilateral balanced occlusion, lingualized occlusion and monoplane occlusion. They are analysed through T-Scan II(Tekscan, Boston, U.S.A) and 1.5mm thick layer was removed from the denture-supporting surface of resin model and then replaced with silicone to simulate resilient edentulous ridge mucosa. A $4{\times}6$ linear strain gauge is attached to the $1^{st}$ premolar and $1^{st}$ molar area. The strain values are recorded according to the occlusal scheme in the centric, eccentric and protrusive position after uniformly applying 50 N and 150 N force through a Universal Testing Machine(instron$^{(R)}$ 5567, Bluehill 2.0 software ,U.S.A.) with the models mounted in the articulator. When performing centric and protrusive occlusion, the three groups of occlusal scheme were compared in the anterior region and in the posterior region. The strains of each group were also compared in the working side and in the non-working side during eccentric excursion. It was observed that the strain in the bilateral balanced occlusion showed a higher value than the lingualized occlusion and monoplane occlusion in every position except the non-working side. However, during the eccentric movement the strain value in the non-working side showed the lowest value in the bilaterally balanced occlusion. The strain change amount from the working side or centric occlusion to non-working side and also the strain variation rate within the non-working side showed the highest value in bilateral balanced occlusion.