• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.226-231
• /
• 2001

The $Mg_{1-x}Sr_xTiO_3\;(x=0.02{\sim}0.08)$ ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were $1250^{\circ}C{\sim}1350^{\circ}C$, 2hr., respectively. From the X-ray diffraction patterns, it was found that the perovskite $SrTiO_3$ and ilmenite $MgTiO_3$ structures were coexisted in the $Mg_{1-x}Sr_xTiO_3\;(x=0.02{\sim}0.08)$ ceramics. The dielectric constant( ${\epsilon}_r$) was increased with addition of $SrTiO_3$. The temperature coefficient of resonant frequency( ${\tau}_f$) was gradually varied from negative value to the positive value with increasing the $SrTiO_3$. The temperature coefficient of resonant frequency of the $Mg_{1-x}Sr_xTiO_3(x=0.036)$ ceramics was near zero, where the dielectric constant, quality factor, and ${\tau}_f$ were 20.65, 95120 and +1.3ppm/$^{\circ}C$, respectively.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권2호
• /
• pp.67-72
• /
• 2004

The microwave dielectric properties and microstructure of the (1-x)$Mg_4Ta_2O_{9-x}TiO_2$(X=0, 0.3, 0.4) ceramic were, investigated. The specimens were prepared by the conventional mixed oxide method with sintering temperature of $1350^{\circ}C$∼$1425^{\circ}C$. According to the XRD patterns, the (1-x)$Mg_4Ta_2O_{9-x}TiO_2$(X=0, 0.3, 0.4) ceramics have the $Mg_4Ta_2O_{9}$ phase(hexagonal). The dielectric constant($\varepsilon$$_{\gamma}$) and density increased with sintering temperature and mole fraction of x. To improve the quality factor and the temperature coefficient of resonant frequency, TiO$_2$($\varepsilon_{r}$=100, $Q{\times}f_{r}$=40,000GHz, $\tau$$_{f}$=＋450 ppm/$^{\circ}C$) was added in $Mg_4Ta_2O_{9}$ ceramics. In the case of the $0.7Mg_4Ta_2O_{9}$-$0.3TiO_2$ and the $0.6Mg_4Ta_2O_{9}$-$0.4TiO_2$ceramics sintered at $1400^{\circ}C$ for 5hr., the microwave dielectric properties were $\varepsilon$$_{\gamma}$=11.72, $Q{\times}f_{r}$=126,419GHz, $\tau_{f}$=-31.82 ppm/$^{\circ}C$ and $\varepsilon_{r}$=12.19, $Q{\times}f_{r}$=109,411GHZ, $\tau$$_{f}$= -17.21 ppm/$^{\circ}C$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1420-1421
• /
• 2006

In this study, structural and micowave dielectric properties of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) cation-deficient perovskite ceeramics. The specimens are prepared through the solid-state route. According to the XRD pattern, $Mg_{4}Ta_{2}O_9$ and $MgTa_{2}O_6$ phase exist in calcined and sintered $Mg_{5}Ta_{4}O_{15}$ powder. Also $Mg_{5}Ta_{4}O_{15}$ phase added with increasing sintering temperature. In the case of calcined and sintered $Mg_{5}Nb_{4}O_{15}$ powder, single phase of $Mg_{5}Nb_{4}O_{15}$ were appeared. The bulk density and quality factor of the $Mg_{5}B_{4}O_{15}$ (B=Ta, Nb) ceramics were increased with sinteming temperature in $1400^{\circ}C{\sim}1450^{\circ}C$, but these were decreased in another sintering temperature. Dielectric constant of the $Mg_{5}Ta_{4}O_{15}$ ceramics was increased continuously with increasing of sintering temperature. And the dielectric constant of the $Mg_{5}Nb_{4}O_{15}$ ceramics was increased in $1400^{\circ}C{\sim}1450^{\circ}C$ but decreased in $1475^{\circ}C$. In the case of the $Mg_{5}Ta_{4}O_{15}$ and $Mg_{5}Nb_{4}O_{15}$ ceramics sintered at $1450^{\circ}C$ for 5h, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 8.2, 259,473 GHz, -10.91 $ppm/^{\circ}C$ and 14, 37,350 GHz, -52.3 $ppm/^{\circ}C$, respectively.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.898-901
• /
• 2006

본 논문에서는 저손실 Mn-Zn 페라이트의 제조공정과 첨가제가 코어의 자기적 특성에 미치는 영향을 조사하였다. 통신부품재료로 Mn-Zn 페라이트 개발에는 필요한 높은 포화자속밀도 및 투자율을 가진 고주파 특성이 양호하고 자기손실도 적은 재료의 필요하다. 따라서, Mn-Zn 페라이트의 고주파 자기 특성의 개선을 위해서는 결정입자의 소경화와 입자계층의 고저항화에 따른 와전류 손실의 억제 및 미세 구조의 균일화에 따른 히스테리시스 손실의 저감이 중요하다. 본 논문에서는 고성능, 저손실의 자심재료를 위해 Mn-Zn Ferrite에 $V_2O_5$와 $CaCo_3$를 첨가하였다. 조성은 MnO : ZnO : $Fe_2O_3$ = 21 : 10 : 69 mol%로 하였다. 이 시료를 $1250^{\circ}C$에서 3시간 소결하였다. 측정은 0.1MHz에서 초투자율을 측정하였으며, 전력손실은 50mT에서 100kHz 및 온도를 변화시켜 측정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.49-49
• /
• 2007

Glass infiltration 방법을 이용하여 '$A_2O_3$/Glass/$Al_2O_3$' 구조의 무수축 LTCC 기판을 제조하였다. Glass infiltration 법에 의한 무수축 기판 제조에 있어 가장 중요한 요소로는 Glass의 점성은 낮고, alumina에 대한 Glass의 젖음성 (wettability)이 좋으며. 낮은 반응성이 요구되기 때문에 Glass의 조성 선정이 무엇보다 중요하다. 본 연구에서는 Na, Pb, Mg 계열의 각기 다른 glass들의 alumina에 대한 젖음성을 평가하여 젖음성 및 치밀성이 우수한 Pb 계열의 Glass를 이용하여 LTCC 기판으로 적용 가능한 온도인 $700{\sim}900^{\circ}C$에서 '$A_2O_3$/Glass/$Al_2O_3$'구조의 glass infiltration 특성을 고찰하였다. 소성 후 수축율은 x-y축 0.2%, Z축 40%, 밑도 $3.8g/cm^3$, 유전율 6.8, 품질계수 552로 무수축 기판으로서의 적용 가능성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.85-87
• /
• 2002

The $(Ba_xBi_{0.6-x}Sr_{0.4})TiO_3$[x=0.1, 0.2, 0.3] ceramics were prepared by conventional mixed oxide method The structural properties of the $(Ba_xBi_{0.6-x}Sr_{0.4})TiO_3$[x=0.1, 0.2, 0.3] ceramics with the sintering temperature($1200^{\circ}C,\;1250^{\circ}C,\;1300^{\circ}C$) were investigated by XRD, SEM, EDS. Increasing the sintering temperature, the intensity of the $Ba_{0.5}Sr_{0.5}TiO_3$ (100), (110), (111), (200), (310) peaks and $SrBi_4Ti_4O_{15}$ (319), (040) peaks were increased. The gram of the $(Bi_{0.2}Ba_{0.4}Sr_{0.4})TiO_3$ ceramics sintered at $1250^{\circ}C$ were fine and uniform. Increasing the sintering temperature. the average gram size of the $(Bi_{0.2}Ba_{0.4}Sr_{0.4})TiO_3$ ceramics were decreased. The density of $(Bi_{0.1}Ba_{0.5}Sr_{0.4})TiO_3$ ceramics sintered at $1250^{\circ}C$ was 5.4524 [$g/cm^2$].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.659-662
• /
• 2004

The microwave dielectric properties of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics with sintering temperature were investigated. All the sample of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics prepared by conventional mixed oxide method and sintered at $1400^{\circ}C-1450^{\circ}C$. According to X-ray diffraction patterns of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics, major phase of the hexagonal $Mg_4Ta_2O_9$ phase were showed. Porosity of the $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics were reduced with increasing sintering temperature, but the bulk density was increased. In the case of $0.8Mg_4Ta_2O_9-0.2CaTiO_3$ ceramics sintered at $1425^{\circ}C$, dielectric constant, quality factor and temperature coefficient of resonant frequency(TCRF) were 13.69, 63,754GHz and -29.37 $ppm/^{\circ}C$, respectively.

• 한국분말재료학회지
• /
• 제25권6호
• /
• pp.487-493
• /
• 2018

The impact of different mixing methods and sintering temperatures on the microstructure and piezoelectric properties of PZNN-PZT ceramics is investigated. To improve the sinterability and piezoelectric properties of these ceramics, the composition of $0.13Pb((Zn_{0.8}Ni_{0.2})_{1/3}Nb_{2/3})O_3-0.87Pb(Zr_{0.5}Ti_{0.5})O_3$ (PZNN-PZT) containing a Pb-based relaxor component is selected. Two methods are used to create the powder for the PZNN-PZT ceramics. The first involves blending all source powders at once, followed by calcination. The second involves the preferential creation of columbite as a precursor, by reacting NiO with $Nb_2O_5$ powder. Subsequently, PZNN-PZT powder can be prepared by mixing the columbite powder, PbO, and other components, followed by an additional calcination step. All the PZNN-PZT powder samples in this study show a nearly-pure perovskite phase. High-density PZNN-PZT ceramics can be fabricated using powders prepared by a two-step calcination process, with the addition of 0.3 wt% MnO2 at even relatively low sintering temperatures from $800^{\circ}C$ to $1000^{\circ}C$. The grain size of the ceramics at sintering temperatures above $900^{\circ}C$ is increased to approximately $3{\mu}m$. The optimized PZNN-PZT piezoelectric ceramics show a piezoelectric constant ($d_{33}$) of 360 pC/N, an electromechanical coupling factor ($k_p$) of 0.61, and a quality factor ($Q_m$) of 275.

• 자원리싸이클링
• /
• 제29권6호
• /
• pp.73-78
• /
• 2020

선탄 폐석의 유리 소재 원료로의 활용을 위해 선탄 폐석의 고온 상 전위 거동 및 Na2CO3의 첨가에 따른 유리질(비정질)화 실험을 실시하였다. 실험 결과 700~1,100 ℃에서 소성된 선탄폐석에는 mullite가 생성되고, 1,450 ℃에서는 mullite와 cristobalite만이 존재하였다. 선탄 폐석의 유리질화는 Na2CO3 첨가됨에 따라 진행되었으며, Na2CO3 10 wt.% 첨가 후 1,450 ℃ 온도에서 소성된 선탄 폐석의 유리질화는 97.9 wt.%로 나타났다. 그러나 Na2CO3가 20 wt.% 첨가된 선탄 폐석의 시료의 경우, 1,100 ℃에서의 2차 재소성 과정에서 nepheline(Na2O·Al2O3·2SiO2)이 생성되었으며, 이를 통해 선탄폐석의 유리질화를 위한 최적의 Na2CO3 첨가량은 10 wt.%로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1011-1016
• /
• 2000

The (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 125$0^{\circ}C$~1375$^{\circ}C$ and 2hours. The structure and microwave dielectric properties were investigated with sintering temperature and composition ratio. From the X-ray diffraction patterns, the cubic SrTi $O_3$and hexagonal MgTi $O_3$structures were coexisted in the (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics. The dielectric constant($\varepsilon$$_{r}$) was increased and the temperature coefficient of resonant frequency($\tau$$_{f}$)was decreased with addition of SrTi $O_3$. The temperature coefficient of resonant frequency($\tau$$_{f}$) was gradually varied from negative value to positive value with increasing SrTi $O_3$. In the case of 0.96MgTi $O_3$-0.04SrTi $O_3$ceramics sintered at 130$0^{\circ}C$, the dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.5, 5918(at 7.33GHz) and +10ppm/$^{\circ}C$, respectively.y.y.y.