Recently, attention has been paid to obtaining bio-polyols from renewable resources. Successful use of these natural ingredients successfully produced in the industry for the synthesis of various polyurethanes is a very important task. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized from methylene diphenyl diisocyanate (MDI)/1, 4-butanediol and bio-polyol (polytrimethylene ether glycol based on 1, 3-propanediol : B-POL)/polyester polyol (polyadipate diol based on 1,4-butandiol : H-PET). The effect of different ratio of bio-polyol (B-POL)/polyester polyol (H-PET) on the physical properties of polyurethane was investigated. As the B-POL content in B-POL/H-PET mixture increased, the glass transition of soft segment (Tgs) and tensile strength of polyurethane decreased, however, the elongation at break and tear strength increased. On the other hand, artificial leather was produced by wet process using synthesized DMF-based polyurethanes. It was found that there was almost no difference in the effect of the B-POL/H-PET composition on the average size and density (the number of cells per unit volume) of the porous cells formed in artificial leather. These results show that there is no problem in using bio-polyol (B-POL) based polyurethane for artificial leather produced by wet process.
Tin-based materials for lithium ion battery have been proposed as new anode candidates owing to their higher specific capacity and relatively high lithium insertion potential. Tin-based materials have been extensively studied as possible replacements for carbon anodes in lithium ion batteries. However, the large volume expansion results in severe particle cracking with loss of electrical contact, giving irreversible capacity losses which prevent the widespread use of tin-based materials in lithium batteries. So remaining studies of tin-based materials are alleviating volume expansion and improving cycle performance. In this work, $SnO_2-SiO_2$ composites were manufactured with sol-gel method to overcome their volume expansion. Carbon was coated with 10 vol% propylene gas. The characteristics of active material and the effect of heat treatment were investigated with TG/DTA, XRD, SEM and FT-IR. Electrochemical characteristics of these composites were measured with CR2032 type coin cells. Carbon coated $SnO_2-SiO_2$at $300^{\circ}C$ heat treatment showed the best electrochemical performance.
Jo, Hyo-Jeong;Seong, Si-Jun;Park, Mi-Seon;Hwang, Dae-Gyu;Gang, Jin-Gyu;Kim, Dae-Hwan
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.412-412
/
2011
CI(G)S계 태양전지는 화합물 반도체로서, 우수한 광 전류 변환 효율을 보이며, 광조사 등에 의한 열화가 없어 유망한 태양전지로 인정받고 있다. CI(G)S계 태양전지를 구성하는 흡수층을 제조하는 방법은 진공 기반의 공증착법 및 스퍼터-셀렌화법이 대표적이며, 액상의 전구체 물질을 도포하고 이를 고온 열처리하는 용액공정법도 최근 많은 연구가 이루어지고 있다. 진공 증착법은 고효율의 흡수층을 제조할 수 있고 상용화에 적합한 방법이다. 그러나 고가의 진공 장비를 이용하는 진공증착법은 원가 절감 관점에서 한계를 지니고 있어, 미래의 저가 공정 실현을 위해 용액 기반 흡수층 제조법도 다양한 접근법으로 연구되고 있으며 현재까지는 진공공정에 비해 상대적으로 낮은 변환효율이 큰 문제점으로 인식되고 있다. 용액 공정에서 전구체 물질의 코팅법으로는 spray법, spin coating법, drop-casting법, doctor-blade법 등이 있으며, 이들 중 양산 공정에 실용화되기 가장 적합한 것으로 보이는 방법으로는, 화합물 나노입자 페이스트를 기재 상에 doctor blade 법으로 코팅한 후에 이를 열처리하여 흡수층을 제조하는 방법을 들 수 있다. 이러한 방법은 균일한 흡수층을 저비용으로 제조할 수 있는 장점은 있지만, 전구체로 사용하는 화합물 나노입자들이 화학적 및 열적으로 매우 안정한 물질이므로, 최종 흡수층에서 큰 결정을 얻기 어렵고, 그 결과 효율이 낮아지는 단점이 있다. 따라서, 치밀하고 조대한 grain 형성을 위하여 CISe 균일한 나노입자를 합성하고 셀레늄을 포함하는 용액을 추가로 도포하여 열처리 공정에서 Se의 손실을 막아 입자를 성장시키는 방법과 In-Se 균일한 나노입자를 합성한 후 Cu, Se이 포함된 용액을 도포하여 코어-쉘 (InSe/CuSe)을 제작하고 이를 Se 분위기하 열처리 하여 흡수층의 결정성을 증진시키고자 하였다. 또한 다양한 방법으로 제작한 CuInSe2 나노입자로 잉크를 제작하여 닥터블레이드 공정을 적용하여 박막을 제작하고 소자 적용성을 평가하였다.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.22
no.5
/
pp.824-830
/
2013
In ultra-precision machining, the inside temperature should be controlled precisely. The important factors are environmental conditions (outside temperature, humidity) and temperature conditions (cutting heat, spindle heat). Thus, in this study, an environmental control cell for the ultra-precision machine that could control the inside temperature and minimize effects of the surrounding environment to achieve a thermal deformation of less than 400nm of a specimen was designed and verified through C.F.D. Further, a method that could control the temperature precisely by using a blower, heat exchanger and heater was evaluated. As a result, this study established a C.F.D technic for the environmental control cell, and the specimen temperature was controlled to be within $17.465{\pm}0.055^{\circ}C$.
CIS(CuInSe2)계 화합물 태양전지는 높은 광흡수계수와 열적 안정성으로 고효율의 태양전지 제조가 가능하여 화합물 태양전지용 광흡수층으로서 매우 이상적이다. 또한 In 일부를 Ga으로 치환하여 밴드갭을 조절할 수 있는 장점이 있다. 미국 NREL에서는 Co-evaporation 방법을 이용해 20%의 에너지 변환 효율을 달성하였다고 보고된바가 있다. 본 연구에서는 미국의 NREL과 같은 3 stage 방식을 이용하여 광흡수층을 제조하고자 한다. 본 실험에서는 Se 증기압을 각각 $200^{\circ}C$, $230^{\circ}C$, $240^{\circ}C$, $245^{\circ}C$로 달리 하며 실험을 실시하였다. 이때 1st stage의 시간은 15분으로 고정하였으며 기판온도는 약 $250^{\circ}C$로 고정 하였다. 2nd stage는 실시간 온도 감지 장치를 이용하여 Cu와 In+Ga의 조성비가 1:1이 되는 시간을 기준으로 Cu의 조성을 30%더 높게 조절하였으며 기판 온도는 약 $520^{\circ}C$로 고정 후 실험을 실시하였다. 3rd stage의 경우 Cu poor 조성으로 조절하기 위해 모든 조건을 10분으로 고정 후 실험을 실시하였다. 각각의 Se 증기압에 따른 물리적, 전기적 특성을 알아보기 위해 FE-SEM, EDS, XRD 분석을 실시하였다. 본 연구에서 기판은 Na이 첨가되어있는 soda-lime glass를 사용 하였으며 후면 전극으로 약60nm 두께의 Mo를 DC Sputtering 방법을 이용해 증착 하였다.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.23
no.6
/
pp.580-589
/
2014
Demands for automation in the cell production process of IT products are becoming increasingly sophisticated. In particular, the dual-arm robot has drawn attention as a solution because it has a flexibility and works similarly to humans. In this paper, we propose an automation system for cellular phone packing processes using two dual-arm robots. Applied robots are designed with specifications to meet the requirements of cellular phone packing jobs. In addition, a robotic cell production system is proposed by applying a method of task allocation for efficient packing of cellular phones. Specifically, a task is assigned to reduce takt-time and to avoid collision between two robots. Finally, we discuss some experimental results that include the packing job of five unit boxes with seven kinds of accessories.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.25
no.5
/
pp.362-367
/
2016
Recently, wireless charging systems have expanded their applications from household electrical appliances to outdoor activity devices. In wireless charging systems, solar cells have versatile advantages, such as abundant raw materials within the earth, reasonable prices of products, and highest power conversion efficiency. In this study, the photovoltaic effect between a silicon solar cell and a photon of infrared wavelength was simulated using a Shockley diode equation. A solar cell power charging system was then set up to: 1) clarify mechanisms of the charging interaction based on the photovoltaic effect with a laser source, and 2) verify interdependency of the parameters: laser settings and geometrical position between a solar cell and the laser. As was observed, the solar cell generates more power when the photon was irradiated uniformly, intensively, and vertically on the surface of the solar cell.
Park, Dong Il;Park, Cheolhoon;Park, Chanhun;Kim, Doohyung
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.25
no.6
/
pp.498-503
/
2016
Many types of robot systems are used in the mass production line of thin film solar cells and flat panel displays. There are some issues such as the deflection and the vibration of the end-effector because robots handle large and heavy substrates at high speed. Heavy payload and high speed cause much vibration because the end-effector (fork) is made of carbon fiber reinforced polymer because of its light weightiness and sufficient stiffness. This study performs a dynamic simulation of an 8.5G solar cell substrate handling robot, including rigid and flexible bodies and a vibration controller. The fifth polynomial trajectory and the zero vibration derivative input shaping algorithm are applied. The vibration reduction is also proved in the experiments.
Park, Mi-Seon;Jo, Hyo-Jeong;Seong, Si-Jun;Hwang, Dae-Gyu;Kim, Dae-Hwan;Gang, Jin-Gyu
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.410-410
/
2011
Chalcopyrite계 화합물 $CuInGaSe_2$($CIGSe_2$)는 높은 광흡수율과 전기적 특성 및 안정성, 그리고 1.02~1.67 eV 범위의 최적의 에너지 밴드갭을 가져 박막태양전지용 광흡수층 재료로 많은 관심을 받고 있다. 일반적으로 $CIGSe_2$ 박막태양전지의 광흡수층을 형성하는 공정은 고효율 태양전지 제작이 가능한 진공공정을 이용한다. $CIGSe_2$ 광흡수층을 형성하는데 있어 진공 공정을 용액기반 공정으로 대처한다면 저비용으로 보다 간단하면서 효율적인 태양전지의 제조가 가능 할 것으로 기대된다. 본 연구에서는 $CIGSe_2$ 광흡수층을 2 단계에 걸쳐 제작하였다. 먼저 Cu, In, Ga 성분을 포함하는 용액을 이용하여 CIG 전구체막을 형성한 후, 다음 단계로 selenization 공정을 진행함으로써 $CIGSe_2$ 박막을 제작하였다. $CIGSe_2$의 결정 성장을 위하여 selenization 공정의 열처리 온도와 시간을 조절하여 CIG 전구체막과 Se 원소의 결합반응을 최적화할 수 있는 공정 조건을 확보하였으며 이를 통해 우수한 결정 및 전기적 특성을 갖는 $CIGSe_2$박막을 제조하였다. 제작된 $CIGSe_2$ 박막의 광전변환 효율을 측정하여 단위셀로서의 구현이 가능함을 확인하였으며 XRD, SEM, EDS, UV-visible을 통하여 $CIGSe_2$박막의 특성을 분석하였다.
Journal of the Korean Society of Manufacturing Technology Engineers
/
v.21
no.1
/
pp.161-166
/
2012
Intravenous (IV) injection is widely used to supply Ringer solution directly into a vein in hospital. Generally, a passive injection method has been used, which causes the inconsistent flow rate of fluid and inappropriate control of injection time by a patient. It leads to an unnecessary nurse's overwork and decrement of IV injection's effect. To solve these problems, flow control infusion pumps have been developed. But because of relatively heavy weight and high price, its usage has been limited. In the present study, a new automatic IV injection system is developed. It is installed with a small pressing mechanism driven by a small electric motor to regulate the flow rate by pressing tube. Proportional integral derivative (PID) feedback control algorithm is applied to control the electric motor. The system is smaller in size and uses lower power than the existing commercial product. The newly developed system is also installed with networking capability, which enables monitoring the status of several automatic IV injection system at the same time.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.