• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.14-19
• /
• 2024

To determine the performance of recycled cells for application to residential BESS, cells used over the past 5 years were selected. The basic specifications of the cell used in the test are nominal voltage of 3.7[V], nominal capacity of 2,200[mAh], charging voltage of 4.05[V], continuous discharge current of 1[C](2,200[mA]), continuous charging current of 0.5[C](1,100[mA]). For new cells, the internal resistance was 21.3±1[mΩ], but for recycled cells, the average internal resistance was 25.38[mΩ], an increase of about 19.1[%]. The charge·discharge capacity was approximately 18.9~19.3[%] lower than that of a new cell. Because internal resistance and charge·discharge capacity are closely related to cell aging, cells to be applied to BESS need to use products with an initial internal resistance of 1.5 times or less and a charge·discharge capacity performance of 70[%] or more.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.635-642
• /
• 2000

We have been derived theoretically the SER's and CLP's of Wireless ATM (WATM) cells employing an OFDM/16QAM modulation scheme in wireless channel modeled as a frequency selective Rayleigh fading channel. The amount of the performance improvement of WATM- OFDM/16QAM systems adopting various coding techniques has been evaluated. In frequency selective Rayleigh fading channel, considering CLP : $10^{-3}$ as a criterion, it is observed that the performance improvement of about 14 dB is obtained in terms of $E_b/N_o$ by employing an OFDM scheme. It is also confirmed that convolutional coding technique gives better performance than the other coding techniques. Especially, when the convolutional codes are adopted to WATM-OFDM/16QAM systems, voice transmission services are sufficiently available with 5 dB of $E_b/N_o$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1517-1524
• /
• 2022

In this paper, we consider a heterogeneous network (HetNet) consisting of one macro base station and multiple small base stations, and assume the coordinated multi-point transmission between the base stations. In addition, we assume that the channel between the base station and the user consists of path loss and Rayleigh fading. Under these assumptions, we present the energy efficiency (EE) achievable by the user for a given base station and we formulate an optimization problem of dynamic cell selection and transmit power allocation to maximize the total EE of the HetNet. In this paper, we propose an unsupervised deep learning method to solve the optimization problem. The proposed deep learning-based scheme can provide high EE while having low complexity compared to the conventional iterative convergence methods. Through the simulation, we show that the proposed dynamic cell selection scheme provides higher EE performance than the maximum signal-to-interference-plus-noise ratio scheme and the Lagrangian dual decomposition scheme, and the proposed transmit power allocation scheme provides the similar performance to the trust region interior point method which can achieve the maximum EE.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.411-412
• /
• 2016

최근 퍼스널 모빌리티에 대한 관심과 수요가 증대됨에 따라 전기에너지를 구동원으로 하는 소형 이동형 제품을 생활속에서 쉽게 접할 수 있게 되었다. 이러한 퍼스널 모빌리티 제품은 자이로센서 기술이 접복된 바퀴가 하나인 외발 전동휠과 세그웨이류의 제품, 전동퀵보드, 전동스쿠터 등 다양한 제품이 출시되고 있다. 또한 이들 제품의 구동전원은 대부분 리튬이차전지가 사용되고 있다. 본 논문에서는 충전과 방전을 반복하는 다셀이 직렬로 구성된 리튬 이차전지 배터리팩에서 발생되는 셀간 편차와 이로 인해 배터리팩의 전체적인 효율성이 저하되는 것을 방지하는 셀 밸런싱에 관한 기술로 과거 완속형의 표준충전에 적합한 1단 밸런싱의 문제점을 보완하기 위해 표준충전과 급속충전을 임의로 선택하여 사용하는 경우에도 정상적인 셀 밸런싱 수행은 물론 빠른 셀 밸런싱을 수행하기 위한 기법에 대해 살펴보았다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.239-245
• /
• 2013

The data retention characteristics depending on neighbor cell's threshold voltage (Vt) in a multilevel NAND flash memory is studied. It is found that a Vt shift (${\Delta}Vt$) of the noted cell during a thermal retention test is increased as the number of erase-state (lowest Vt state) cells surrounding the noted cell increases. It is because a charge loss from a floating gate is originated from not only intrinsic mechanism but also lateral electric field between the neighboring cells. From the electric field simulation, we can find that the electric field is increased and it results in the increased charge loss as the device is scaled down.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.3
• /
• pp.161-163
• /
• 2014

We consider the device-to-device (D2D) communication underlaying multi-cell interference system, in which the cellular downlink (DL) resource is reused by K cells and two D2D transmission links within each cell. In this paper, it has been shown that the downlink intra-cell and inter-cell interference can be effectively handled by interference alignment (IA) technique, as long as the simultaneous D2D links are properly selected or power-controlled so that they may not incur interference to the base stations in the same and neighbor cells. In particular, we provides the IA technique that can achieve the theoretically maximum possible degree of freedom (DOF), demonstrating that a total of (K+1)M degrees of freedom (DOFs) can be achieved for K-cell interference system with two underlaying D2D links, where base stations, cellular UE's, and D2D UE's all have M transmit and receive antennas.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.231-234
• /
• 2002

셀룰라 신경회로망의 연상 메모리를 이용하여 시각적인 입력 데이터의 연산을 통하여 영상 패턴의 분류와 인식을 수행한다. 셀룰라 신경회로망은 일반적인 신경회로망과 같이 비선형 데이터의 실시간 처리가 가능하고, 세 포자동자와 같이 격자구조의 셀로 이루어져 인접한 셀과 직접 정보를 주고받는다. 응용 분야로는 최적화, 선형/비선형화, 연상 메모리, 패턴인식, 컴퓨터 비젼 등에 적용할 수 있다. 영상의 이미지 픽셀을 셀룰라 신경회로망의 셀에 대응하여 전체 이미지 영상을 모든 셀룰라 신경회로망의 셀에서 동시에 병렬로 처리할 수 있어 2-D 이미지 처리에 적합하다 본 논문은 셀룰라 신경회로망에 의한 연상 메모리 구조를 설계하고, 학습된 하중값 메모리에서 가장 적당한 하중값을 선택하여 학습된 영상과 정확히 일치하는 출력을 얻는 방법을 제시한다. 학습을 통한 연상 메모리 구현에는 각각의 뉴런에서 일정하지 않은 다른 템플릿을 사용한다. 각각의 템플릿은 뉴런들 간의 연결 하중값을 나타내고 학습011 따라 갱신된다. 학습방법으로는 템플릿 하중값 학습에 뉴런들 간의 연결 하중값을 조정하는 가장 단순한 규칙인 Hebb의 학습방법이 사용되었고 분류값 학습에 LMS 알고리즘이 사용되었다

• Journal of the Korea Computer Industry Society
• /
• v.2 no.11
• /
• pp.1395-1406
• /
• 2001

In order to cover a widespread service range, terrestrial/satellite-mixed network is being combined with terrestrial ATM network. This dissertation analyzes and investigates several previously existent CDV compensation methods in order to compensate CDV arising from interfacing satellite TDMA and ATM. Specifically to supplement the problems of timestamp and cell number counting methods, new Variable Timestamp method for CDV compensation is proposed. To evaluate the proposed method, MMPP(Markov Modulated Poisson Process), which can express VBR service very well, is selected as a cell input traffic model of terrestrial transmitting earth station. After several simulation, it is also confirmed that CDV compensation capability for VBR services is very superior to the cell number counting method. In this case, as the timestamp number Nts increases, CDV compensation capability increases, and the CDV distribution length is reduced.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.81-87
• /
• 1989

A cellular array multiplier for performing the multiplication of two elements in the finite field GF($2^m$) is presented in this paper. This multiplier is consisted of three operation part ; the multiplicative operation part, the modular operation part, and the primitive irreducible polynomial operation part. The multiplicative operation part and the modular operation part are composed by the basic cellular arrays designed AND gate and XOR gate. The primitive iirreducible operation part is constructed by XOR gates, D flip-flop circuits and a inverter. The multiplier presented here, is simple and regular for the wire routing and possesses the properties of concurrency and modularity. Also, it is expansible for the multiplication of two elements in the finite field increasing the degree m and suitable for VLSI implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.57-64
• /
• 2017

Today, due to the environmental regulations regarding air pollution in the EU, the use of EPS (Styrofoam) as the cushioning material in the packaging industry is decreasing. In effect, air cushioning based cushioning materials are rapidly expanding into the market and replacing EPS, due to their excellent buffering ability and environmental friendliness. This is a new selective filling type air filling material manufacturing technology that affords improvements in the amount of raw materials required, its processing and its aesthetic appearance compared to the conventional air filling cushioning materials. In this study, a multi-stage air cell filling valve molding technology is developed based on selective filling technology, which allows packages to be selectively filled in various forms by applying valve forming structure technology. This multi-stage air cell filling valve molding technology is a technique in which a plurality of injection ports are formed by laminating three layers of films, viz. a first injection film, a valve film, and a second injection film having valve ends. In the conventional technology, a separate external air injection path for injecting air into a plurality of connected air bags is needed. However, in the proposed system, an external air injection path is formed inside the air bag, Due to the lack of need for an injection furnace, the raw material and process are reduced and air is injected and then discharged, while the air bag is reduced in length to 63 ~ 66% of its normal value. The outer surface of the outer air injection path is integrated inside by maintaining the original length of the cross section, while the unnecessary folded air is injected into the interior of the air bag, This smart air filling type cushioning material manufacturing technology constitutes a big improvement over the existing technologies.