• Land and Housing Review
• /
• v.2 no.4
• /
• pp.407-413
• /
• 2011

This paper reports a novel structural health monitoring (SHM) technique for detecting de-bonding between a concrete beam and CFRP (Carbon Fiber Reinforced Polymer) sheet that is attached to the concrete surface. To achieve this, a multi-scale actuated sensing system with a self-sensing circuit using piezoelectric active sensors is applied to the CFRP laminated concrete beam structure. In this self-sensing based multi-scale actuated sensing, one scale provides a wide frequency-band structural response from the self-sensed impedance measurements and the other scale provides a specific frequency-induced structural wavelet response from the self-sensed guided wave measurement. To quantify the de-bonding levels, the supervised learning-based statistical pattern recognition was implemented by composing a two-dimensional (2D) plane using the damage indices extracted from the impedance and guided wave features.

• Journal of the Korean Vacuum Society
• /
• v.22 no.4
• /
• pp.175-180
• /
• 2013

We developed the contamination prevention module of an optical window for an In-Situ Particle Monitor (ISPM) system. the core part of the module is the generator of an ultrasonic wave and the module is to remove particles stuck to the window by the transfer of the wave force to the window surface. In order to enhance transfer efficiency of the waves the frequency of the ultrasonic wave was optimized and a low impedance material (plexiglass) and a soft sealing material (Si rubber) were used. The ISPM with the developed module was installed at the exhaust line of a BPSG CVD equipment and the effect of the module was verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2354-2360
• /
• 2009

Healthcare is a field where ubiquitous computing is most widely used. We propose a mining-based healthcare multi-agent system for ubiquitous computing environments. This proposed scheme select diagnosis patterns using mining in the real-time biosignal data obtained from a patient's body. In addition, we classify them into normal, emergency and be ready for an emergency. This proposed scheme can deal with the enormous quantity of real-time sensing data and performs analysis and comparison between the data of patient's history and the real-time sensory data. We separate Association rule exploration into two data groups: one is the existing enormous quantity of medical history data. The other group is real-time sensory data which is collected from sensors measuring body temperature, blood pressure, pulse. Proposed system has advantage that can handle urgent situation in the far away area from hospital through PDA and mobile device. In addition, by monitoring condition of patient in a real time base, it shortens time and expense and supports medical service efficiently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2315-2322
• /
• 2008

The requesting a consultation of the farm manager is about the diagnosis and prevention of the breeding and extermination for diseases and insects in greenhouse, the managing problem for diseases and insects turn up a main issue. To solve these problems, this paper proposes a PDA based greenhouse, diseases and insects management system for mobile(GDIMS) uses as keeping up with ubiquitous time, which makes prediction and management for diseases and insects more efficiently checked at any time and anywhere you want to, and go well with the motto of ubiquitous. This system is using the environmental data from the greenhouse attached sensors provide the accurate diagnosis and recipes, which supports to product clean crops. There are no need to visit the greenhouse because our system is based on mobile devices that obtain the information in the greenhouse, which makes management in efficient with little number of people. This wort builds simply virtual greenhouse model that assembles system component of environmental sensor for performance analysis and offers a PDA view of the greenhouse status.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.499-502
• /
• 2009

Supply of electric power and electricity safety for whole system and network are essential element. Electricity safety technology need rating for product and research about certification as product development that is done cotton flannel mixed with development of u-IT technology consists. Study on serve to develop electricity safety integration supervision system to apply product to u-City electric power appliance and cotton flannel mixed of u-IT appliance, Connection badness sensing instrument made device built-in electric power IT cotton flannel mixed in outlet that is used most in electric power appliance terminal. Using sensor on ZigBee, RFID performance estimation of communication and module for remote safety check of electricity safety integration supervision system. A performance experiment and estimation in PD, Arc detection diagnosis system and certification KS, electricity safety about product that get fitness finding.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.445-450
• /
• 2021

Bio-impedance measurement is a measurement device that can be used to obtain biometric information and diagnose skin diseases using convenience, low cost, and low cost devices. In this study, the bio-impedance was measured using a direct dry gold electrode and a simulation study through animal bio modeling to obtain biometric information in a biometric form. Impedance was measured by inserting electrodes into subcutaneous areas of animal tissue and applying frequencies of 100 uA, 1-100 kHz using a two-electrode method. As a result of the measurement, the resistance of the electrodes is measured high at 5 mm electrodes compared to 7.5 mm and 10 mm electrodes based on 5 mm electrodes. Based on the 5 mm electrode, an average difference of 1.49% was found for the 7.5 mm electrode in the total frequency range, and the impedance difference was confirmed to be 2.624% for the 10 mm electrode. In the future, the research results are expected to be valuable in designing and manufacturing electrodes for bio-inserted electrocardiogram sensors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.915-923
• /
• 2018

A concrete embedded antenna design is proposed for probing the durability of a building at an industrial scientific medical band of 902~908 MHz. The proposed antenna is designed with a stacked slot patch structure for lower impedance variation to a dielectric constant of concrete, as a dielectric constant difference is derived from the moisture content. The proposed structure has a wider bandwidth when a parasitic patch structure is used, which reduces antenna performance degradation resulting from the moisture content of concrete. The measured voltage standing wave ratio of the proposed structure is less than 2 and the beam width is approximately $80^{\circ}$, whereas the gain is greater than 7 dBi. The proposed antenna is fabricated with a rectangle-type concrete block, which is simulated and measured for return loss and antenna gain.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.803-806
• /
• 2016

'Pokemon Go',which is game program, provides a clue to solve the problem of healthcare in the sense of leading changes in behavior of the users. 'Pokemon Go'is a spin-off of the $Pok{\acute{e}}mon$ game series and uses Augmented Reality(AR) technology. AR, which can be said to complement the real world, has been used in many fields such as medical applications, broadcasting, manufacturing, the mobile sector as a wide range of technologies. In particular, the medical field as area of the active application from the start of AR, provides a great help in medical fields, that is accurate medical diagnosis and prevention of unnecessary dissection by synthesizing the patient information and the image of actual patient on three-dimensional data of the sensor such as MRI or ultrasonic wave. In this study, we analyze the VR technology trends, application examples, and the future of VR and AR based medical services in healthcare.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.825-832
• /
• 2021

In this study, by selecting specific aptamers that selectively detection on P. gingivalis, the main cause of periodontal disease, and purifying and identifying protein molecules that bind to the selected aptamers, the mechanism of action of P. gingivalis was investigated. A DNA library having 39 random sequences was prepared, and aptamers with specificity for P. gingivalis were selected using the SELEX method, and the nucleotide sequence was analyzed by cloning using PCR2.1 cloning vector. 8 of aptamers with different nucleotide sequences were selected, and modified weston blot was performed using APG-3 among the selected aptamers to identify 11 proteins that act directly, and proteins were analyzed. As a result, a protein that selectively binds to P. gingivalis was isolated and identified. Therefore, aptamer selectively binds and attaches to proteins related to inhibition of sugar metabolism and cell activity of P. gingivalis, suggesting the possibility of a sensor for diagnosis of periodontal disease.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.433-443
• /
• 2022

Purpose: In this paper, we propose a study of deep learning algorithms that estimate and predict sarcopenia by exploiting the high penetration rate of smart devices. Method: To utilize deep learning techniques, experimental data were collected by using the inertial sensor embedded in the smart device. We implemented a smart device application for data collection. The data are collected by labeling normal and abnormal gait and five states of running, falling and squat posture. Result: The accuracy was analyzed by comparative analysis of LSTM, CNN, and RNN models, and binary classification accuracy of 99.87% and multiple classification accuracy of 92.30% were obtained using the CNN-LSTM fusion algorithm. Conclusion: A study was conducted using a smart sensoring device, focusing on the fact that gait abnormalities occur for people with sarcopenia. It is expected that this study can contribute to strengthening the safety issues caused by sarcopenia.