• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.81-88
• /
• 2024

The payload BioCabinet of CAS500-3 is designed for 3D stem cell differentiation, culture, and analysis utilizing bio 3D printing techniques in space. The 3D printing technique was initially developed for orbital use; however, it lacks separate validation for extreme launch vibration environments, necessitating a design that mitigates the launch load on the payload. This paper proposes a passive vibration isolator with a low-stiffness elastic support structure and high damping characteristics to reduce the launch loads affecting the BioCabinet. We explore the high-damping characteristics through the superelastic effects of SMA (Shape Memory Alloys) and a multi-layered structure incorporating viscoelastic tape. The effectiveness of the proposed vibration isolation system was confirmed via launch vibration tests on a qualification model.

• The Korean Journal of Zoology
• /
• v.28 no.4
• /
• pp.227-236
• /
• 1985

In an attempt to make a scrutiny into a mechanism for the formation of quaternary structure of LDH isozymes, male mice were intraperitoneally exposed to a wide range of tetrodotoxin concentration and the changes in relative percentage of the five isozymes were monitored by electrophoresis and subsequent densitometry. The observations that a conspicuous increase of the $H_4$ isozyme was demonstrated in nearly all brain tissues, that the $M_4$ isozyme of skeletal muscle tissue was slightly increased while the $M_3H$ and $M_2H_2$ isozymes were decreased, that the M/H ratio was strikingly reduced in heart tissue and that assembly of $H_4$ isozyme was revealed in liver tissue although its rate was extremely low suggest that new intracellular ionic environment established by compulsory change in Donnan equilibrium could alter the LDH isozyme distribution. The reduction of assembly of $M_3H$ isozyme found in mouse tissues exposed to tetrodotoxin also seems to suggest that the subunit combination of 3M+H is very unfavorable in an intracellular environment deviated from its accustomed one. It was reaffirmed that there might occur TTX-insensitive sodium channels in plasma membrane.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.19-32
• /
• 2012

Pharmaceutical use accounts for a great part of articles and papers on crosslinking of polymers. Crosslinking of polymers used for tissue engineering and drug delivery respects non-cytotoxicity and in situ gelling. The crosslinking of polymers is aimed not only at the improvement of modulus, chemical resistance, and thermal resistance, but also at endowing them with such functions as metal adsorption, antifouling, and ion exchange via crosslinked segments. Smart polymers responding to environmental change, and cosslinking mediated by light, enzyme, natural compound and in aqueous medium in consideration of environment are being studied. Developing new polymeric materials is essential along with the pharmaceutics aiming at the longevity of 120 years old. Functionalization and property adjustment of polymers through crosslinking will be done more delicately. Hydrogels will be focused on injectable and in situ gel forming. In the coating industry crosslinking system with low non-toxicity and low energy consumption will be developed in consideration of workers and environment.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.97-101
• /
• 2017

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction of pores. In particular, open pores which are penetrable pores are necessary for industrial applications such as in high temperature filters and as support for catalysts. In this study, Fe foam with greater than 90% porosity and 2-mm pore size was successfully fabricated using a slurry coating process and the pore properties were characterized. The Fe and $Fe_2O_3$ powder mixing ratios were controlled to produce Fe foam samples with different pore sizes and porosity. First, the slurry was prepared through the uniform mixing of powders, distilled water, and polyvinyl alcohol(PVA). The amount of slurry coated with the PU foam increased with increasing $Fe_2O_3$ mixing powder ratio, but the shrinkage and porosity of the Fe foams decreased, respectively, with increasing $Fe_2O_3$ mixing powder ratio.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.52-58
• /
• 2008

The object of this study is to investigate the effects of intermittent cyclic stretching on the smooth muscle cells (SMCs) seeded onto aligned multi-layered fibrous scaffold. To make multi-layered fibrous scaffold, polyurethane (PU) and poly(ethylene oxide) (PEO) were electrospun alternatively, then were immersed into distilled water to extract PEO. Various types of scaffolds were fabricated depending on fiber directions, i.e., aligned or randomly oriented. The direction of stretching was either parallel or vertical to the fiber direction for the aligned scaffolds. The stretching was also applied to the randomly aligned scaffolds. The duration of stretching was 2 min with 15 min resting period. During the stretching, the maximum and minimum strain was adjusted to be 10 and 7%, respectively with the frequency of 1 Hz. The bioactivities of cells on the scaffolds were assessed by quantifying DNA, collagen, and glycosaminoglycan (GAG) levels. And the cell morphology was observed by staining F-actin. SMCs under parallel stretching to the fiber direction responded more positively than those in other conditions. From the results, we could explain the morphological effect of a substrate on cellular activities. In addition the synergistic effects of substrate and mechanical stimuli effects were confirmed.

• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.141-148
• /
• 2007

Purpose: The object of this study was to evaluate the development of continuous osteogenic differentiation and bone formation after the subcutaneous implantation of the tissue-engineered bone, in vitro. Methods: Human adipose-derived stem cells were obtained by proteolytic digestion of liposuction aspirates. Adipose-derived stem cells were seeded in PLGA scaffolds after being labeled with PKH26 and cultured in osteogenic differentiation media for 1 month. The PLGA scaffolds with osteogenic stimulated adipose-derived stem cells were implanted in subcutaneous layer of four nude mice. Osteogenesis was assessed by RT-PCR for mRNA of osteopontin and bone sialoprotein(BSP), and immunohistochemistry for osteocalcin, and von Kossa staining for calcification of extracellular matrix at 1 and 2 months. Results: Implanted PLGA scaffold with adipose-derived stem cells were well vascularized, and PLGA scaffolds degraded and were substituted by host tissues. The mRNA of osteopontin and BSP was detected by RT-PCR in both osteogenic stimulation group and also osteocalcin was detected by immunohistochemistry at osteogenic stimulation 1 and 2 months, but no calcified extracellular deposit in von Kossa stain was found in all groups. Conclusion: In vivo, it could also maintain the characteristics of osteogenic differentiation that adipose-derived stem cells within PLGA scaffold after stimulation of osteogenic differentiation in vitro, but there were not normal bone formation in subcutaneous area. Another important factor to consider is in vivo, heterologous environment would have negative effect on bone formation as.[p1]

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.65-69
• /
• 2010

Collagen is the most abundant animal protein in mammals, accounting for about 30 % of all proteins. It is present in connective tissue and contributes to the structural framework of most organs. The tripeptide (glycineproline-hydroxyproline) with the INCI name Tripeptide-29 is main component of collagen type I. The palmitoyl tripeptide (palmitoyl-glycine-proline-hydroxyproline) with the INCI name Paimitoyi Tripeptide-29 is a synthetic material that was designed as a topical agent to stimulate collagen production. We synthesized the palmitoyl tripeptide as a potential anti-wrinkle compound. This compound has been characterized using HPLC. This compound proved, through in vitro tests, to stimulate collagen production and fibroblast proliferation. These results were very promising, so human studies were subsequently performed. We investigated the skin improvement effect of the palrnitoyl tripeptide on human skin by using non-invasive instruments. We measured physiological effects such as skin wrinkles and elasticity after volunteers applied the cosmetic products for 8 weeks. We observed significant improvement in skin wrinkles and elasticity after use of the cosmetic products for 8 weeks. We concluded that the palmitoyl tripeptide had an anti-aging effect on human facial skin.

• Korean Journal of Veterinary Research
• /
• v.58 no.4
• /
• pp.211-217
• /
• 2018

Mesenchymal stem cells (MSCs) are useful candidates for tissue engineering and cell therapy. Physiological cell environment not only connects cells to each other, but also connects cells to the extracellular matrix that provide mechanical support, thus exposing the entire cell surface and activating signaling pathways. Hydrogel is a polymeric material that swells in water and maintains a distinct 3-dimensional (3D) network structure by cross linking. In this study, we investigated the optimized cellular function for canine adipose tissue-derived MSCs (cAD-MSCs) using hydrogel. We observed that the expression levels of Ki67 and proliferating cell nuclear antigen, which are involved in cell proliferation and stemness, were increased in transwell-hydrogel (3D-TN) compared to the transwell-normal (TN). Also, transforming growth factor-${\beta}1$ and SOX9, which are typical bone morphogenesis-inducing factors, were increased in 3D-TN compared to the TN. Collagen type II alpha 1, which is a chondrocyte-specific marker, was increased in 3D-TN compared to the TN. Osteocalcin, which is a osteocyte-specific marker, was increased in 3D-TN compared to the TN. Collectively, preconditioning cAD-MSCs via 3D culture systems can enhance inherent secretory properties that may improve the potency and efficacy of MSCs-based therapies for bone regeneration process.

• Korean Journal of Microbiology
• /
• v.55 no.2
• /
• pp.112-116
• /
• 2019

Thp1/PCID2 is a subunit of the evolutionally conserved TREX-2 complex, which is required for transcription-coupled mRNA export from the nucleus to the cytoplasm. In fission yeast, Schizosaccharomyces pombe, there are two orthologs of the Thp1/PCID2 protein. In addition to pci2 (SPBC1105.07c) gene, SPAC1B3.08 gene encodes a PCI domain-containing protein that is predicted as a component of TREX-2 complex. Overexpression of SPAC1B3.08 cause slight defects of both growth and mRNA export. Yeast two-hybrid and co-immunoprecipitation analysis exhibits that the SPAC1B3.08 protein interacted with Sac3 and Dss1, which are another components of TREX-2 complex. These observations support the possibility that the S. pombe SPAC1B3.08 protein, as a component of TREX-2 complex, is involved in mRNA export.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.811-817
• /
• 2019

Radiation-therapy causes the adverse radiation effect. It is called osteoradionecrosis. A protein-therapy is carried out in order to cure osteoradionecrosis. The typical method of the protein-therapy is using BMP-2. Considering to bone damage, it is more important that maintains enough to circumstance regeneration for osteoblast differentiation on damage site of bone. Thus, this study is on a tissue regeneration to cure radiation critical damage. I observed that the formation of new regeneration bone by injection of collagen sheet BMP-2 on irradiated mouse. Consequently, I examined new bone formation with collagen sheet BMP-2 on irradiated mouse after 8weeks. Therefore I suggested that using collagen sheet BMP-2 which can be good for new bone regeneration effect on radiation side effect area.