• Journal of the KSME
• /
• v.33 no.2
• /
• pp.134-144
• /
• 1993

조립성 평가법은 동시공학을 추진하는 하나의 도구로써 전자산업의 시장과 환경의 변화에 대응할 수 있는 토탈 개발 시스템이다. 조립성 평가법으로부터 얻는 효과는 개발 납기의 단축, 제조원 가의 절감, 생산성 향상, 품질 향상 등을 꼽을 수 있다. 조립성 평가법의 적용 추진을 지속하여 제품 설계자들의 설계 기술이 질적으로 향상되어 고객이 원하는 경쟁력 있는 제품을 제공할 수가 있도록 해야할 것이고, 따라서 향후 모든 상품화 설계는 조립성 평가법이 완제품 제조업의 신 상품 개발 기본 업무로 규정되어야 할 것이다. 제조성이 고려된 제품의 구조와 부품의 형상으 로부터 공정설계, 제조원가 산출 및 양산시에 필요한 전용기 등을 도출하여 개발해야 할 설비를 동시에 개발 착수할 수 있고, 소재개발로부터 신규 부품과 그 제작 공법의 개발까지 모든 분야에 대하여 제안해 줄수 있는 제조성 평가법이 개발되어야 하고, 앞으로는 PCB조립성 평가법, 소재 가공성(성형성, 절삭성, 접합성, 처리성)평가법, 재활용 평가법, 신뢰성 평가법 등이 포함된 지능형 설계 평가법의 출현을 기대해야 할 것이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.11
• /
• pp.91-100
• /
• 2007

Many manufacturing devices must execute motions as quickly as possible to achieve profitable high-volume production. Most of them have devices having flexibility and a time delay of one sampling is added to the plants when they are controlled by fast discrete controllers, which brings about non-minimum phase zeros. This paper develops a control strategy that combines feedforward and feedback control with command shaping for such devices. First, the feedback controller is designed to increase damping and eliminate steady-state error. Next, the feedforward controller is designed to speed up the transient response. Finally, an appropriate reference profile is generated using command-shaping techniques to ensure fast point-to-point motions with minimum residual vibration. The particular focus of the paper is to understand the interactions between these individual control components. The resulting control strategy is demonstrated on a model of a high-speed semiconductor manufacturing machine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1276-1283
• /
• 2004

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause following the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.835-838
• /
• 2010

자동차 승객 안전에 대한 요구가 점차 확대 되어감에 따라 전방 충격으로부터 승객의 상해를 감소시키기 위한 각종 승객 안전장치 중 하나로, 에어백 시스템은 정면충돌 시 승객 사망률을 약 30%정도 저감시킬수 있다. 에어백은 충돌 시 일정한 힘 이상을 받게 되면 작동하도록 설계하여야 한다. 본 논문은 CATIA를 이용하여 3차원 설계를 하였으며, 해석 프로그램을 이용하여 사출성형품의 구조해석 및 사출 해석을 하여 최적화 하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.518-520
• /
• 2011

금속분말 쾌속조형법의 한 종류인 DMLS 공정은 사출성형품의 균일한 냉각이 가능한 3차원 냉각시스템을 포함한 코어, 캐비티 제작이 가능하다. 그러나, 코어 및 캐비티 내 미세형상의 경우 DMLS로 제작하기에는 난해하므로 별도 미세 절삭가공을 통해 제작할 필요가 있다. 따라서, 본 연구에서는 DMLS금형강 소재의 미세 절삭가공 특성을 분석하고자 하였으며, 이를 위하여 HIP 공정 적용 전 후 DMLS금형강 소재를 대상으로 미세 절삭가공 실험을 수행하고 버 발생 및 공구마모 경향을 분석하였다. 실험 결과 HIP 적용 전 시편이 강도 및 조직측면에서 미세 절삭가공에 상대적으로 유리함을 확인할 수 있었다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.120-123
• /
• 2000

It is well known, for many years, that deep drawability can be improved by applying variable blank holding force. To apply variable blank holding force during cup during, we set up pressure controlling system on experimental hydraulic press, and the pressure control system is often called NC(Numerically Controlled) cushion system Using the NC cushion system we compared the drawability of square steel cups with NC cushion and that with conventional cushion. The results show drawability is greatly improved when the pressure control curve is designed in a S-shaped curve. This paper includes design details of the NC cushion system and experimental analysis of drawability with experimental NC cushion system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.194-197
• /
• 2004

In the tube hydroforming process, a tube is placed into the die cavity and the ends of the tube are sealed by fixing the axial cylinder piston into the ends. Then the tube is pressurized with a hydraulic fluid and simultaneously the axial cylinders move to feed the material into the expansion zone. Therefore, the quantitative relationship between process parameters such as internal pressure and feeding amount and hydroformabillity, is hard to establish because of their high complexity and many unknown factors. In this study, the empirical and the quantitative relationship between process parameters and hydroformabillity are analyzed by fuzzy rules. Fuzzy expert system is an advanced expert system which uses fuzzy rule and approximate reasoning. Many process parameters are converted to the quantitative relationship by use of approximate reasoning of fuzzy expert system. The comparison between experimentally measured hydroformabillity from hydroforming experiments and the predicted values by fuzzy expert system shows a good agreement.

• Transactions of Materials Processing
• /
• v.6 no.5
• /
• pp.400-407
• /
• 1997

Geometric mapping technique has been used to find the shape of initial blank for sheet forming. The method was chosen because of its simplicity and numerical efficiency. Error in blank shape were measured along deformation path by FE analysis of forming. Blank shape was modified by volume additionaddition/Subtractiontraction method with taking with taking into account of deformation path. Modified blank shape shows an acceptable result, showing the current method can be an useful tool for predicting blank shape in the practical application. More test will be done to verify the validity of the method.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.33-37
• /
• 2002

A short shot is a molded part that is incomplete because insufficient material was injected into the mold. Remedial actions to control the process conditions can be taken by the injection molding experts based on their knowledge and experience. However, it is very difficult for the non-experts to avoid short shot by finding the proper process conditions such as mold temperature, melt temperature and filling time. In this paper, an intelligent generator of the optimal process conditions based upon fuzzy logic algorithm is proposed so that trial and error can be minimized and the non-experts as well as the experts can also find the optimal process conditions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.156-160
• /
• 1996

In this study of made Unloader is moving linear transfer system for mainly plastic working or forming of small electronic unit and other at press line. This machine for lading and unloading a workpiece has been installed in a press in order to load and unload a workpiece form a press die. Control method be used PLC. it took data of input from each sensor and send signal of output to actuator today we have a lot of problem at work of press line. most of press work be operated by human so they often hurted terreble accident by press machine. Because press working system in automotive factories are now changing over to a transfer press working system this Unloader will give more easily and speedy production and manpower saving less of pruduction cost high perfomance