Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

Blank Design System for Sheet Forming

박판성형의 초기소재 설계시스템

  • Published : 1997.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Geometric mapping technique has been used to find the shape of initial blank for sheet forming. The method was chosen because of its simplicity and numerical efficiency. Error in blank shape were measured along deformation path by FE analysis of forming. Blank shape was modified by volume additionaddition/Subtractiontraction method with taking with taking into account of deformation path. Modified blank shape shows an acceptable result, showing the current method can be an useful tool for predicting blank shape in the practical application. More test will be done to verify the validity of the method.

Keywords

References

  1. Proc. 7th NAMRC Use of the slip line field method in deep drawing large irregular shaped component V.R. Hasek;K. Lange
  2. Proc. 11th NAMRC Computer aided design of blanks for deep drawing large irregular shpaed component H. Gloeckl;K. Lange
  3. Computer Modeling of Sheet Metal Forming Processes Computer aided geometric simulation of sheet metal forming Processes E. Chu;D. Soper;H. Gloeckl;J.C. Cerdeen;N.M. Wang(ed.);S.C. Tang(ed.)
  4. Int. J. Mech. Sci. v.28 The modeling of sheet metal stamping R. Sowerby;J.L. Dncan;E. Chu
  5. J. Mat. Proc. Tech. v.24 Blank shape analysis for heavy gauge metal forming G.N. Blount;P.R. Stevens
  6. Trans. ASME, J. Eng. Ind. v.109 Further development of Multi-stage sheet forming analysis method S.A. Majlessi;D. Lee
  7. Int. J. Num. Meth. Eng. v.30 Application of an inverse FE-procedure for strain estimations of sheet metal forming part Y. Q. Guo;J.L. Batoz;J.M. Duroux
  8. Int. J. Mech. Sci. v.34 Ideal forming Ⅱ. -Sheet forming with optimum deformation K. Chung;O. Richmond
  9. 대한기계학회 춘계학술대회 논문집 이상적 성형이론과 변형경로 반복법을 이용한 최적블랭크 설계에 관한 연구 박상후;윤정환;양동열;김용환